First you must install flash driver,than turn off your phone,run XS++,press connect,hold "C" button on your phone and plug in USB cable. And thats itQuote:
Originally Posted by cpickering
Printable View
First you must install flash driver,than turn off your phone,run XS++,press connect,hold "C" button on your phone and plug in USB cable. And thats itQuote:
Originally Posted by cpickering
Does anybody know when this patch will be ported correctly for w580??
Thanks, Jamie
how about k618??can i use the password protection too??:confused:
and is this also possible for K610i?
NO it is ONLY for K810I
Done that.. But what file do I make with the contents? Thats the bit I'm confused with..Quote:
Originally Posted by seamonkey
OK, so the contents of the patch are here, but what do I put them into for XS++ to read?
i dont under stand ... how can i use this patch?
thx very much.. but i just dont quite understand how to patch yet.. I'll try searching the forum more.. Again thanks..
What do you all do not understand?
1. At the bottom of the patch you'll find "????????????". Replace them with your password for the keylock - from 4 to 6 digits. Write 30 for 0, 31 for 1,...,39 for 9.
If you don't want to have keylock password put ";" in front of this line
2. Apply the patch as a normal patch
3. Go to Menu->Settings->General->Security->Locks->Phone protection->Protection->Privacy, input your password and select what to lock with it - messages, File manager, etc.
reet.. If I try to use XS, 'write patch' is greyed out.. No idea why..
Using setool2lt I get this error..
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799************ CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\carl.LINE-3\Desktop\password-updated.vkp
VKP script loaded OK. Lines: 266
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44EC0000
New block #0001 added: $45280000
New block #0002 added: $45480000
New block #0003 added: $44740000
New block #0004 added: $45B40000
New block #0005 added: $45500000
New block #0006 added: $44FC0000
New block #0007 added: $45BC0000
New block #0008 added: $45C40000
New block #0009 added: $45C80000
Blocks selected OK. Reading blocks: 10
Block @ $44EC0000 read error. Have only: 00000000 bytes
Elapsed:19 secs.