if you need for setool2lite for this firmware exist in "rest folder"Quote:
Originally Posted by Rafhan
if not exist for your firmware you can make it with program make rest in setool2lite 1.8 program( with ssw2rest.exe)
Printable View
if you need for setool2lite for this firmware exist in "rest folder"Quote:
Originally Posted by Rafhan
if not exist for your firmware you can make it with program make rest in setool2lite 1.8 program( with ssw2rest.exe)
Hi, I've just flashed my Sony Ericsson V630i which was locked to vodafone. everything seemed to work fine. When i turned my phone on i got a white screen for a minute or so, then got the Please Wait... after a few more minutes the phone reboot as normal. But i still got the Insert correct PIN. I turned off my phone removed the battery again and replaced, but cannot get the phone to turn on. Just get a red flashing light!!!
Please Help....
You mean this ( a sign of a dead erom is normally a blinking red led in the infra red port. )
REPAIRING EROM GUIDES for most sonyericsson phones
Nice day
I tried uploading patches onto my W580, but for some reason I can't get the patches to work. I got a few R8BA024 patches, and every time I tried to upload them onto my phone, it said patch values differ. I'm sure that I got the right patches for my phone, since when I open up the vkp file, it says "W580_R8BA024" on the first line.
The firmware I'm using is the Hong Kong R8BA024.
Thanks.
i think patch values differ not a problem. you can click on yes when see this message and see work or not.this test is free!Quote:
Originally Posted by geokilla
I did continue to apply the patch. After it said the patch was successfully applied, I turned on my phone to find that the patch had failed. The system graphics were missing.Quote:
Originally Posted by mohammad.t
I was trying to apply the following file:
i find this patch for w580 r8ba024 try it:Quote:
Originally Posted by geokilla
Nope, it still says that the patch value differs.
Would this be because I'm using Hong Kong firmware?
Don't know if this helps or not, but this is what I get when I use XS++ to connect my W580i:
19:38:46| XS++ v3.1 (Darwin) Ready !
19:38:46| Executed on Microsoft Windows XP
19:39:01|
19:39:01| Attempting to open the interface...
19:39:01|
19:39:01| TURN OFF PHONE!
19:39:01| Hold 'C' button on phone and connect phone NOW.
19:39:01| You have 30 seconds...
19:39:01|
19:39:05| Baseband ID: 9900
19:39:05| Protocol Version: 3.1
19:39:05| Phone name detected!
19:39:05|
19:39:05| Profiling SEMC phone...
19:39:05| Platform: DB2020
19:39:05| OTP CID: 51
19:39:05| EROM CID: 52
19:39:05| EROM Color: Red
19:39:05| IMEI: 35683401xxxxxx
19:39:05| Phone ID: W580
19:39:05| Region: HONG_KONG
19:39:05| CDA: CDA102568/104 R8A
19:39:05| Firmware Version: R8BA024
19:39:05| EROM: R3A022
19:39:05| Ready for operation!
are you sure your firmware is hong kong?
can place log with setool2lite?
The log from SeTool2lite:Quote:
Originally Posted by mohammad.t
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Abort all operations.
Elapsed:7 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401523478 CERT:RED
LDR: DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Vernon\My Documents\Sony Ericsson W580\setool2liteV1.11\Bright Red Volume.vkp
VKP script loaded OK. Lines: 2376
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45740000
New block #0001 added: $45780000
New block #0002 added: $45A00000
Blocks selected OK. Reading blocks: 3
Blocks readed to memory OK. Checking contents...
Elapsed:154 secs.
Hope it helps.