have u tryed the seus to update it ? see if that helps
and when u turn it on can u hear the start up sound ?
Printable View
have u tryed the seus to update it ? see if that helps
and when u turn it on can u hear the start up sound ?
Hi Phil, I still have that phone that wont flash here. Can't understand FAR and Stuff. Dont know if I need more files or what. :confused:
jd flasher is the one tool i have never used why are u useing it again buddie and not se tool
THIS IS FOR PHIL: With se tool I flash Main and it seems to work, then when flahing FS I think it fails because when I try to flash fs it has fatal error. Seamonkey said far and jd flasher would help me but I need some in depth, detail instructions and also some files I dont have. You said you would help if I added you to msn and I did but got no replies back. Here is the log from tonight. I tried it again to see but to no avail...still wont start.
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7CA017_CXC1123106_NAM_1_EE
Restore from:R7CA017_CXC1123106_NAM_1_EE
writing D:\Downloaded Programs\Sony Ericsson\SeTool Software\SETOOL2LITE\Firmware\Use these\W600_R7CA017_FS_AMERICA_1_RED49\W600_R7CA017 _FS_AMERICA_1_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:261
Will flash 261 blocks...
verify block error
last blk:50010000,00010000
Elapsed:151 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102453_120905
MODEL:W600i
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744600583447 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7CA017_CXC1123106_NAM_1_EE
Restore from:R7CA017_CXC1123106_NAM_1_EE
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:311 secs.
THIS IS FOR MM12573: Sorry mm125753, I can't get it to work yet but if I get it working I will help you. Right now i'm in the learning stage myself. I need to understand the structures of MAIN, FS, Custpack, EROM, SSW Etc before I fully understand them and then how far works with the plugins and where to get the files needed for it to work on the w600i. I dont know if the flash memory in the phone are separate flash chips or if its on a single chip, or with with partitions and where each file (MAIN & FS) reside and how to use far to copy them over.
THIS IS FOR ELITEK> I was talking to two different people.
Gigman:
thanks for the reply.
its like the Concord Fallacy at this point but I'm determined to get my phone back.
I may even buy a few other bricked w600i off ebay if mine doesn't work just to see.
I actually made progress at one point by just flashing the mbn file using setool2.
It booted again and got me back to the WSOD. Unfortunately that is just back to where I was. I was hoping to actually get rid of the white screen so I could read sms and not manual dial anymore.
But now I'm back to a brick. I think part of my problem at this point may be that I have a very old or weak battery.
In the bricked stage I think the battery won't charge long enough. Either that or I've worn out the cables.
The red light will only come on for about 5 minutes and then it will not come back on until I try a partial flash and drain it again.
Finally, figured out that dragging .mbn file to ssw2rest.exe was actually creating the rest file (without .rest at the end) in my c:/documents and settings/username/ directory...
Maybe now I can full flash using
W600_R7CA017_MAIN-FS-CUSTOM.rar including:
.mbn, .fbn, .zip, and (.rest I created)
Never tried that.
However, i'm worried because I've never been successful with any of the programs to backup my GDFS. It always just goes on until my phone is drained.
Edit:
I can get back to the WSOD by using XS++ to flash only the firmware and filesystem and custom pack selecting a region
it says flashed firmware main and filesystem success and success the CS-loader has been unlocked but then during fs customization it seems to hang forever on activating filesystem...
finally i give up and stop it.
but it hangs on activating the filesystem
mm44165, did you ever get it fixed? WSOD?