Aerix - free unlock A2 platform

hi Ive read all the posts and failed to unlock a w595, i had a problem with drivers to start with. but eventually managed to get aerix to run and got the following log

Connecting via SEMC USB Flash Device (USB1)(ver2.2.0.5)
Connecting to the baseband..
Entering service mode…
Detected chipset: DB3150 P3A/P3B/R3A
Boot-ed via: EROM
EROM version: 1200-4341 SEMCBOOT R6A017
The boot mode is not supported
You must boot via ROM
Failed!
An error has occurred. Use the Report button to export details
Error Code : 536910AF005BDA74

One thing i did notice was the aerix i downloaded said it was for 6RA019 whereas this EROM is 6RA017 could this be the problem? If not how do I boot via ROM?

First of all register its free :). After that run Aerix login and choose your phone ... after that you press unlock press on your phone 2 and 5, plug it in and let the programm do his job :)

Dakinator I have registered and ran the aerix program,,,except I used C instead of 2 and 5... thats how it got as far as it did.. its an error message about the booting.

Quote:

---

Originally Posted by nufc

Dakinator I have registered and ran the aerix program,,,except I used C instead of 2 and 5... thats how it got as far as it did.. its an error message about the booting.

---

When you press "C", you boot via EROM. When you press "2+5", you boot via ROM.
You must boot via ROM

hey guys.
so my problem is i think the aerix server was being turned off.

Code:

---

Action journal
13:58:36  Instructions
13:58:36  Please connect the phone via USB while holding 2-5…
13:58:36 . The action name is 'Unlock'
13:58:36 . The action started waiting for the user
13:59:42 . The action finished waiting for the user
13:59:42  Connecting via Generic EMP USB Flash Device (USB2) (ver. 2.2.0.5)
13:59:42  Connecting to the baseband...
13:59:42  Entering service mode...
13:59:43  Detected chipset: DB3150 P3A/P3B/R3A
13:59:43  Boot-ed via: ROM
13:59:43  Sending loader...
13:59:45  IMEI: ***************
13:59:46  OTP CID: 52
13:59:46  Product type: Retail
13:59:46  Color: Red
13:59:47  Sending loader...
13:59:51  Server communication…
13:59:55 e Server problem
13:59:55 w Try again in a few minutes
13:59:55 e Login failed
13:59:55 e Failed!
13:59:55 . The action reported failure

Error code
# C46BD30EF015AF1C

Error details
---
4C 25 91 3E 99 2D 9B 06 1D 7E 31 FB CF CF 3D F9
F9 2A 27 4F 99 FC 15 60 3D 4A B8 A7 AF 1D 13 A2
D5 D2 88 BB 8E 02 6B 3B 43 50 6F 20 E2 12 E6 D8
0B D9 E9 72 39 16 8C BF 9C 1A EF 87 5F DC B3 8C
8B 45 67 C5 F7 E3 D9 CB 0D D1 F1 B6 8F C6 C0 EE
F7 16 19 73 D9 C4 D5 20 EE D5 B5 2B 11 85 53 62
EB 66 F9 DE A9 4C 85 9A 03 10 FF C7 11 54 A3 20
1B 89 57 4E 87 5C CA 4D 63 AC FF 06 E1 92 0D BE
4B 7C 13 AA 25 13
---

---

look at this. ive been trying for days.
and i already checked the secondary server adress so please dont answer with "try this server adress ***.***.***"

i would be so glad if youll answer me quickly. please hurry D:

i just want to use my new phone.

umm and its a w595.


im verry sorry for my english :D

i've changed my firmware on my k850 and when i put the sim it said that i contact my operator ,then i tried to unlock with aerix , the steps are ok it sais succesfull but when i put the sim in the phone it still don't work..

Changing firmware don't unlock Sony Ericsson phones. Now your phone it's unlocked, but you have to do step 7. from this tutorial:
http://www.topsony.com/forum/a2uploa...tml#post111079

I have a SE C510 and it doesn't even detect it :/ Any help? I tried everything already.

Quote:

---

Originally Posted by sauris

I have a SE C510 and it doesn't even detect it :/ Any help? I tried everything already.

---

Download: http://www.topsony.com/forum/a2uploa...tml#post131481
install "ggsetup" and identify your phone. If it's CID53, you can't use AERIX.

How do I check if it's CID52 or CID53?