Here you have Top Sony Forums - View Single Post - W200 jdflasher_test6 and look here for W200 elfpack ELFPack v1.0(db2010,db2020) - Top Sony Forums
Printable View
Here you have Top Sony Forums - View Single Post - W200 jdflasher_test6 and look here for W200 elfpack ELFPack v1.0(db2010,db2020) - Top Sony Forums
ok, got those ELF packs...Quote:
Originally Posted by SeaMonkey
but when ever i try to download jdflasher_test6 i can not extract the archive, it says, that the archive is damaged... i tried it from 3 different PC-s
i don't know what the problem is...
yup... it is definitly damaged... tried it a hundred times... could you upload it again, on topsony, or on rapidshare?, plsss?Quote:
Originally Posted by SeaMonkey
tnx wery much, in advance...
What does this mean please? How can I 'make rest files' with mkrest2?Quote:
Originally Posted by SeaMonkey
** IGNORE! (How can I delete my message??) I've already found the answer in an earlier message! Silly me.
I've managed to make the rest files now but where do I find qamaker? :confused:Quote:
Originally Posted by SeaMonkey;111201
1. With your [B
I've looked in the setool2lite folder but can't see it. :(
All I get is AVG telling me setool2lite has the Trojan Horse Generic_c.YAB in it (which I gather from other posts is a mis-reported virus ... I hope)
Thanks!
AVG detect it as a Trojan, but, don't worry, it's not. Add it to exclusions.
I did everything up to step 8 correctly (I assume) using a CID53 K800 and installing:
K800_R8BF003_MAIN_GENERIC_WI_RED53
K800_R8BF003_FS_EUROPE_1_RED53
and when i go to run executor.b, i still get "insert sim card" or insert correct sim card". What am i doing wrong?
I just want to unlock the phone, i used SUES last year and have had a dead phone for a year now.
If you want to run "executor", you must start your phone. But you can't do this until you insert a valid SIM card.(from the provider which locked your phone).
Or a test sim :)
Or an NGAGE SIM ;)
can someone tell me does my phone can use this things..
my phone use cid 53 and r4JA011...
it really help me a lot...
thanks...
W200i and CID53 is a problem :(
heh... i tried to download it from a dosen diferent PC-s, even turned of my antivirus while downloading, and stil can not extract it...
ok...how do i patch unlock the phone...i have a .vbk...thats customized from my main file..that is patchd to be unlocked..but how do i jd flasher to get it in..
btw i cant acess the games folder..because my phone is locked to rogers..and i dont have a rogers sim..so it makes it harder
need a test sim or rogers sim the only way
i cant generate a rest file idk why..i take the MAIN FRIMWARE and drag it on top of that file that generates the rest file...it dosent work...is that a probelm?
i have a w580i with a cid 53 network lock...can i patch unlock it using far manager???without the rest file? if so how?
i can get a rogers sim card if needed..but i need guide on how to patch UNLOCK the CID 53 W580I....
you will find the rest file in c:\documents and settings\username\
the vkp goes to c:\documents and settings\username\
>> riders4sia
plz help!!! after i ran executor the phone dosen't respond any more, i can't log it with da flasher. i can't do anything! plz help!
i have k610i i flashed it with the same main from the anycid R1KG001, after i ran the executor i took off the battery and put it in and now nothing. the phone is not responding...
(I'm assuming you mean it won't even respond to holding down 'c' on startup.)Quote:
Originally Posted by gilgayo
The bad news is it sounds as if you killed the software in the EPROM of the phone. (This is why it can't even respond to 'c')
The good news is that you might be able to hold down the '2' & '5' keys instead of the 'c' (bypassed EPROM) to fix the software in the EPROM.
Being a relative newby, though, I'm not sure exactly how you'd do this but I'm sure others can help you here.
ok, now the phone is responding but Da Flasher can't connect him (it connected once and showed me only two folders) now when i try to reconnect (holding down the 'c') it seems to recongnize that something is attached to the pc but cannot connect to it..
what have i done??:o
okk i took out the battery and re insereted it and it worked... i've reflashed my phone to the original setting... i think i will just pay the 10 euro for the ultimate unlocker... thnx any way!
i unlocked my orange w880i cid53 freely
its very easy
after u run the executor it restarts ur fone but before restarting remove battery reinsert and connect to jdflasher then u have bflash and bfs
enter bflash and flash the rest file then the patch file
just read the tutorial carefully Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums
ive read it, after i run executor my phone died.. didn't respond to anything, the day after when it finally responded there wasn't any bfs or bflash.. my problem is also that there isn't my version of the firmware in the anycid so i need to flash it to many times...
thnx anyway!
i need w810i cid50 firmware please help me,my firmware is APAC
why dont u search in download
Good day guys. I'm just new here and i need help in the lingo you're using. I want to flash my w580i walkman phone. Here's the result that i got from XS++:
12:35:33| Baseband ID: 9900
12:35:33| DB2020
12:35:33| Protocol Version: 3.1
12:35:33| Phone name detected!
12:35:33|
12:35:33| Profiling SEMC phone...
12:35:33| Baseband ID: DB2020
12:35:33| OTP CID: 51
12:35:33| EROM CID: 53
12:35:33| EROM Color: Red
12:35:33| IMEI: 35683401xxxxxx
12:35:33| Phone ID: W580
12:35:33| Network: APAC
12:35:33| CDA: CDA102568/101 R8A
12:35:33| Firmware Version: R8BE001
12:35:33| EROM: R3A022
12:35:33| Ready for operation!
I know that the problem is my CID53 issue since i recently updated my walkman phone. I just dont know how to follow the instructions given by SEAMONKEY in his post "Patching CID53 (DB2020)&DB2010,2012" last 01-03-2009 since I can't understand some technical words like MAIN. Will appreciate any helpful response. Thanks and more powers!:)
Hi. I am new at all this, and just when i got the hang of XS++ and realized what I have to do, i found out that my K770i is DB2020/cid 53. So i can't work with XS++. About patching with FAR and JDFLASHER, can i use it just to unlock the phone code, without patching it? If you want more detail about my problem, read my other post here: Phone protection on K770i - Top Sony Forums
Any suggestions accepted. Thanks!
umm..wwhy is when im try'n to open the "executor" file
im getting the "operation faild" thing??
is that because i fleshed my K610 to W660??
what main did u make the executor with
I used the w660 main
Guys its realy importent
pls dont ignore me
maybe becuse its cross flashed but i dout it try to reflash the phone fully then it should work
I think i got it
at the anycid foloder i cant find my firmware
where can i get r&bb001??
Thx for helping
try the download area if not free hosting web sites ie 4shared
Sorry for troubling you
but i cant find it
would u pls just give me the link??
Thx bro
if you can't find it, better to use the firmware which you have found the anycid for
got cid 53 for r8ba024 for w610i how can i patch it for simlock remove?
need a cid53 r8ba024 for sony ericssom w610i for flashing
is it possible to remove patches from a CID53?
yep, that's what this thread is taking about
well this thread says how to put patches on CID53 from what i read