Printable View
i think in all fairness ur goning to end up buying a nother problem and waisting ur monine as if u try to take the ribbon and key pad off that phone u are watching u may break it if it was me i would just change the 2 parts i said to do and as long as there put back on prply and u dont break the lcd all will be fine
Hi again,
Well I got the parts and stuck them all back in but no luck. It started blinking a white screen which may have been some problem from when I played around with the firmware before I started this thread. Anyways I tried playing around with the firmware again and I think I may have finally bricked the phone. It won't even turn on now or connect to SEUS or XS++. This is the final part of the XS++ log before it stopped working (I updated the GDFS with one from the downloads section of this website and XS++ says it worked fine????). Any ideas??? thanks
20:48:20|
20:48:20| Attempting to open the interface...
20:48:20|
20:48:20| TURN OFF PHONE!
20:48:20| Hold 'C' button on phone and connect phone NOW.
20:48:20| You have 30 seconds...
20:48:20|
20:48:24| Baseband ID: 9900
20:48:24| Protocol Version: 3.1
20:48:24| Warning: IMEI name does not match GDFS name (IMEI:W850 GDFS:K700)
20:48:24| ...using IMEI name
20:48:24|
20:48:24| Profiling SEMC phone...
20:48:24| Platform: DB2020
20:48:24| OTP CID: 49
20:48:24| EROM CID: 52
20:48:24| EROM Color: Red
20:48:24| IMEI: 35282601xxxxxx
20:48:24| Phone ID: W850
20:48:24| Region: APAC
20:48:24| CDA: CDA102568/101 R4A
20:48:24| Firmware Version: R1KG001
20:48:24| EROM: R3A016
20:48:24| Ready for operation!
20:52:21|
20:52:21| Sending db2020_cid01_prodid_p3j.bin...
20:52:21| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
20:52:21| This is a PRODUCTION_ID loader
20:52:21|
20:52:21| Sending db2020_mem_patcher_cid52_r2a006.bin...
20:52:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
20:52:21| This is a MEM_PATCHER loader
20:52:21|
20:52:21| Sending db2020_red52_cs_r3a009.bin...
20:52:23| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
20:52:23| This is a CHIPSELECT loader
20:52:23| Activating loader...
20:52:23| Activating GDFS...
20:52:59| This loader is UNLOCKED
20:52:59| Restoring the GDFS...
20:52:59| Attempting to write 1261 variables...
20:53:20| Wrote 1261 variables!
20:53:20| GDFS was restored successfully!
20:53:20| GDFS operation was successful
20:53:22| Disconnected... Unplug the phone
20:54:39|
20:54:39| Attempting to open the interface...
20:54:39|
20:54:39| TURN OFF PHONE!
20:54:39| Hold 'C' button on phone and connect phone NOW.
20:54:39| You have 30 seconds...
20:54:39|
20:55:11| Error: Cannot open phone communication port
20:55:13| Disconnected... Unplug the phone
20:56:14|
20:56:14| Attempting to open the interface...
20:56:14|
20:56:14| TURN OFF PHONE!
20:56:14| Hold 'C' button on phone and connect phone NOW.
20:56:14| You have 30 seconds...
20:56:14|
20:56:47| Error: Cannot open phone communication port
20:56:49| Disconnected... Unplug the phone
20:57:10| Shutting down...
I just read on a forum that you might know how to fix it (I Killed My W850i with Wrong Gdfs...dead W850i....repair Gdfs.. - SE-NSE Forums - Sony Ericsson Forum and Community). Ok so I didn't know the GDFS was unique to my phone but at least I made a backup of it right!!!!!
So could you please give me some instructions on how to get my backed up GDFS back onto the phone eventhough it won't turn on and won't connect to XS++. I think after that I need to get the firmware sorted out (how do I pick which to use and what does the filesystem mean)?
Thank you so much for your help so far - I wish I knew as much as you.
show as a k700 isnt any firm were p[roblem just u havent fited the parts right thats all and now if u have wrote a gdfs that wasnt urs uv killed it and if u dont have a back up u will have to use D-Ultimate Unlocker to fix it
add ur gdfs back up to the mics box on se tool lite then press wright gdfs and con holding the 2 and 5 buttons on ur phone then it will right it back
after I put the new parts in it turned on and just blinked a white screen on and off every few seconds and I couldn't turn it off without pulling the battery out. Does this suggest a hardware or software problem?Quote:
Originally Posted by philzfog
I did backup my GDFS so will try this when I get home from work. What do you mean by con? Will it write to my W850i even if it won't turn on be recognised by SEUS or xs++?? When I plug it in to charge nothing seems to happen? thanksQuote:
Originally Posted by philzfog
con/ means conect ur better to wright it back with se tool buddie as xs wont work
ok I will give that a go after work. Can you tell me what you think the problem was when it would turn on and blink white on and off? Is that software or hardware problem?
after u wright back the gdfs thats for that phone if it still shows as a k700 its a hardwere fault double check the ribbon is on was it used parts or new ?