can i unlock r300i
Printable View
can i unlock r300i
I don't know if it can be unlocked or not. Try to generate an unlock patch. In my tool check the Flash platform and Flash CID. Then you will know...
all my sim locks are unlocked.
i did just as you said in the first page.
i flashed from k530i to w660.
but when i insert sim it asks for flight mode or normal.a circle with cross is there where the range bar should be.
i tried both modes.
it says configuration error.my range bar shows range.
Model:W660i
MAPP CXC article: R8BB001 prgCXC1250446_GENERIC_FY
MAPP CXC version: R8BB001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R8A
Default article: cxc1250959
Default version: R6BC002
Operator: 000-00
Elapsed:25 secs.
got the cust pack. renamed the wrong folder.now phone is ok..
hi hi walkman....
Hey,
I have a question about my K510 with CID50, how can i patch this phone? In SETool i have an error "Block have only 00000000 bytes" about this patch. Thanks for an answer ;)
I cann't find the firmware also not on this site so...Quote:
Originally Posted by simox
hello there people, Just like to say its a great site and im very impressesed and thanks for all the help already.
the phone is a se w580i locked to orange, the cid is 52
ive followed the instructions on the first post and ive followed it and its saying processing part 1 and its gone past processing 2 and 3.
then it says further down to flash "props sent ok"
Then it says
RESTARTING PHONE, IF PHONE NOT RESTARTS, THEN REMOVE BATTERY FROM PHONE AND INSERT IT BACK
Open com port okay
CID52 BYPASS PROCEDURE FISNISHED
Open COM port ok ( this i at the bottom)
and then in the box it says " press power on shortly"
and then the green bar keeps on going up and and then back up again, ive waited abour 30 minutes and its still going, can some please help me??
cheers tipsygent
ps thanks for having me:confused:
>*<<*<
then Service Info, then Sim lock
Network 5
Network subnet 5
Service provider 5
Corporate 5
Extended 5
this is what it show already....!
and i can use any sim/operator in my country
so my phone is unlock..
shud i really need a Quick Acceess Patch
@HiFlyer:
Your phone cannot be unlocked for free, sorry.
@[tipsygent]:
Try to reflash the MAIN firmware(but only the MAIN), and try again. Also you can try the jdflasher to apply the patches instead of SETool2 Lite.
@SSyar:
If the padlocks are open, then your phone is unlocked.
The QA patch is recommended, if you want to apply other patches in future. Otherwise you can skip it if you want...Quote:
shud i really need a Quick Acceess Patch
cheers simox reflashed the phone i was using a cable for a k750i that i borrowed, but managed to unlock it with the normal usb lead that come with the phone.Quote:
Originally Posted by simox
cheers for the help
tipsygent
Now i have:
My phone is not able accept any sim card :(Code:welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657600694488 CERT:RED
FLASH CID:49 COLOR:RED
Elapsed:10 secs.
Any ideas ?
Done - Phone unlocked. But I don't know why still there is a info:
Code:Network LOCKED
Operator: 260-02
It is an absolutely normal behavior, because we patched the MAIN firmware to trick the SIM-lock checker functions, but the flashing/patching tools read the SIM-lock status from GDFS, what is untouched.Quote:
Originally Posted by bildos
this is what i get...and as soon as i insert the cable my mobile turn ON and goes to File Transfer ModeQuote:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:42 secs.
having toruble in .... in Quick Access Patch
chk out this link
Applying Patches on DB2020 Phones with JDFlasher
I'm just about to do my w850i...
thank you for such a great tutorial and all the help,
just wondering, do i only need the MAIN firmware file or do i need to have the FS and a custompack?
sorry if it's daft, first time with owt like this lol
thanks again :)
If your main is same like 1 in phone you don't need FS or CUSTPACK,but if isn't than you need all 3 files and first do full flash and than apply MAIN+QA patchQuote:
Originally Posted by skutash
ok thank you,
do you know how i can find the same MAIN as my phone or find out which one my phone has?
thanks
erm, if it helps this is from xs++:
21:14:00| Baseband ID: 9900
21:14:00| Hardware Platform: db2020
21:14:00| Protocol Version: 3.1
21:14:01| Phone name detected!
21:14:01|
21:14:01| Profiling SEMC phone...
21:14:01| Baseband ID: db2020
21:14:01| OTP CID: 49
21:14:01| EROM CID: 52
21:14:01| EROM Color: Red
21:14:01| IMEI: 35282601xxxxxx
21:14:01| Phone ID: W850
21:14:01| Network: HUTCH_1
21:14:01| CDA: CDA102677/2 R8A
21:14:01| Firmware Version: R1KG001
21:14:01| EROM: R3A016
and this is the MAIN i have:
W850_R1KG001_MAIN_GENERIC_RED52
cheers :)
You have wright MAIN
ok... thank you for the help :)... just downloading v1.11 of setool, then i'm doing it...
also, the phone I have is on 3, if I wanted to change it to o2 I have the cust pack but no FS file, how would I do it or is it just best to unlock it and leave it as it is?
thanks
Do, also, an identify with Setool , because i think your MAIN is W850_R1KG001_MAIN_HUTCHISON_CY_RED52Quote:
Originally Posted by skutash
ok,im still downloading setool atm but i feel that your right that it is hutchinson as ive just been lookin at the service settings thing on the phone and hutchinsons mentioned a lot as well as three logos etc... if it is do you know where I can find the o2 files or the correct MAIN (whichever's the best) as i am only unlocking to put the phone onto o2...
cheers :)
I have SETool now, My w850i is on network 3, locked etc bought direct from 3...
I want to unlock to put on o2...
Please can anyone tell me where I can find the MAIN, FS and CUST files needed to flash the phone before using the QApatch...
this would be a massive help as I have been looking everywhere.
thank you
I'm running Identify in Setool but all that appears in the log is the imei number?
I'd like to just do a full flash of the phone before unlocking...
please could you tell me what files I need and where from?
I currently have the patches, XS++ and Setool2 v1.11
i think all i need is software?
I flashed and unlocked my w850i all thanks to this site... thanks for all the help and the hardest part for me was finding the relevant files lol... will be more than happy to help anybody needing help now :) cheers
Guys,
I just unlocked my orange prepaid phone (W580i) by following the instructions on this thread - and so thrilled!! Thank you very very much :)
Keep up the good work...
Regards
17:13:17| XS++ v1.6.8 Beta Ready !
17:13:17| Executed on Microsoft Windows XP
17:14:12| Attempting to open the interface...
17:14:12|
17:14:12| Turn off phone
17:14:12| Hold 'C' button on phone and connect phone.
17:14:12| You have 30 seconds.
17:14:12|
17:14:21| Baseband ID: 9900
17:14:21| Hardware Platform: db2020
17:14:21| Protocol Version: 3.1
17:14:21| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
17:14:21| ...using GDFS name
17:14:21|
17:14:21| Profiling SEMC phone...
17:14:21| Baseband ID: db2020
17:14:21| OTP CID: 51
17:14:21| EROM CID: 53
17:14:21| EROM Color: Red
17:14:21| IMEI: 35923501xxxxxx
17:14:21| Phone ID: W580
17:14:21| Network: EUROPE_2
17:14:21| CDA: CDA102774/17 R7A
17:14:21| Firmware Version: R8BE001
17:14:21| EROM: R3A022
17:14:22|
17:14:22| Ready for operation!
can i unlock sim?
pls help me..
Your phone cannot be unlocked for free at the moment, because the CID is 53...
Hello Mates, I´m trying to unlock a friends sons phone.. He have a k610i, I have sim unlocked some samsung phones for his other sons, but this phone is more of a challenge for me. And i was woundering if there is some patient person on this forum that can take his time to help me unlocking this phone for him. Thanks in advance
FmyFriend
Quote:
Originally Posted by Fmyfriend
First read this XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums and after you connect phone with XS++ post log here without IMEI number and than we tell you what next
Thanks seamonkey for the tip. I now have downloaded xs++ and the semc usb flas driver..
i then did what the xs++ said, press connect on xs++ -> hold C and insert usb cabel. But it dont work when i have the port on USB.. when i changed to COM 1 then the program says.. port opened ok. but it still dont work.. I downloaded the newest version of xs++. Maybe i should have a specific version of it?
I looked in the xs++ logg and here is what it says.
16:26:37| XS++ v3.1 (Darwin) Ready !
16:26:37| Executed on Microsoft Windows XP
17:07:34|
17:07:34| Attempting to open the interface...
17:07:34|
17:07:34| TURN OFF PHONE!
17:07:34| Hold 'C' button on phone and connect phone NOW.
17:07:34| You have 30 seconds...
17:07:34|
17:08:04| Error: Cannot open phone communication port
17:08:06| Disconnected... Unplug the phone
17:10:44|
17:10:44| Attempting to open the interface...
17:10:44|
17:10:44| TURN OFF PHONE!
17:10:44| Hold 'C' button on phone and connect phone NOW.
17:10:44| You have 30 seconds...
17:10:44|
17:11:15| Error: Cannot open phone communication port
17:11:17| Disconnected... Unplug the phone
17:11:44|
17:11:44| Attempting to open the interface...
17:15:26| Sorry, your phone is NOT SUPPORTED
17:15:26| Sendinging shutdown signal to phone...
17:15:28| Shutting down...
17:22:10| XS++ v3.1 (Darwin) Ready !
17:22:10| Executed on Microsoft Windows XP
17:23:46| Error: Server not found!
17:23:52| Shutting down...
17:25:37| XS++ v3.1 (Darwin) Ready !
17:25:37| Executed on Microsoft Windows XP
17:28:48|
17:28:48| Attempting to open the interface...
17:28:48|
17:28:48| TURN OFF PHONE!
17:28:48| Hold 'C' button on phone and connect phone NOW.
17:28:48| You have 30 seconds...
17:28:48|
17:29:19| Error: Cannot open phone communication port
17:29:21| Disconnected... Unplug the phone
17:30:20|
17:30:20| Attempting to open the interface...
17:30:20|
17:30:20| TURN OFF PHONE!
17:30:20| Hold 'C' button on phone and connect phone NOW.
17:30:20| You have 30 seconds...
17:30:20|
17:30:51| Error: Cannot open phone communication port
17:30:53| Disconnected... Unplug the phone
17:31:17|
17:31:17| Attempting to open the interface...
17:33:00| Disconnected... Unplug the phone
17:33:58|
17:33:58| Attempting to open the interface...
17:35:51| Disconnected... Unplug the phone
i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"
please help:confused:
If you use setool lite, you must write a custom pack for phone to get finalized properly.
in the scripts folder there is a file named test.zip, you can use this one for finalize your phone.
regards
Quote:
Originally Posted by 99smiffy99
I flashed my K800i, and unlocked it.Quote:
Originally Posted by 99smiffy99
What I did was to custom change the CDA code when I flashed the fs file, or ensure you have choosen the right region fs file.
I used: Simlockpatch gen v2.1, and XS++ v3.2 plus setool2lite v1.10
Maybe this thread may help!
http://www.topsony.com/forum/cmps_in...?page=CDA_K800
@Fmyfriend
When you hit connect in XS++,press C button on phone and than connect USB cable - if that don't work - try to change USB port and clean conector on phone - if that don't work try to reinstall flash drivers
@99smiffy99
It's doesn't matter what tool you use - you must finalize flashing with CUSTPACK, but CUSTPACK must be same region like FS (so if you use FS - EUROPE_2 - than CUSTPACK must be for EUROPE_2). Just look here XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums SECTION 4
Hm, thanks for so accurate manual ;)
Still - I have situation where mobile phone has bought on leasing and its close to the end of 2-yer payment, so I wondered - is it safe to do this patching? Will it break any agreements to telephone company or service provider?
Oh yes, Please do something with that rest thing - First time i did that file creation, I was confused ebcause I could find created file in make_rest folder, but it already was in rest folder ... the list is huge. Maybe you could set some kind of attributes to focus to that new rest file? ;)
Anyway - thanks for your initiative! Good luck in further releases!
There is always a minor chance that something goes wrong, but if you make a GDFS backup, then there is no reason to worry.Quote:
I wondered - is it safe to do this patching?
Read the contract and you will know for sure. However your service provider will NOT be noticed about unlocking...Quote:
Will it break any agreements to telephone company or service provider?
Can you please explain this in more detail? Thanks.Quote:
Oh yes, Please do something with that rest thing - First time i did that file creation, I was confused ebcause I could find created file in make_rest folder, but it already was in rest folder ... the list is huge. Maybe you could set some kind of attributes to focus to that new rest file? ;)