Cid 53 phones are not supported , yet , by Simox SIMlockPatch Generator.
And if they were, you couldn`t apply patch with none free program.
Nice day
Printable View
Cid 53 phones are not supported , yet , by Simox SIMlockPatch Generator.
And if they were, you couldn`t apply patch with none free program.
Nice day
thanks this helped a bit, gotta check if it can fully work for what i need.
I have phone with CID53 and his SIM-locked. What can i do?
No free solution , only against payment.
Look here:
Davinci Team
Nice day
Hi! i'm a totaly new to this kind of stuff and i wonder what main i should use, i have a w660i and when i look in the downloads section and there are so many to choose from which one should i take? oh and if it matters i need swedish. the phone is locked to telia. by the way my phone is black but all the downloadable files says RED does it matter?
First of all you read thisQuote:
Originally Posted by Sushiman
USB Flash Driver Installation - Guide - Top Sony Forums and this XS++ 2.x Guide - Top Sony Forums and after that post your log from XS++
Sushiman:
Please connect the phone to XS++ and post the log.
Without any technical details: the "red color" means that the phone is a retail product(this type of phone is the most frequent), and not the phone's case color.Quote:
by the way my phone is black but all the downloadable files says RED does it matter?
I'm trying to patch my phone and I ran into a problem with the Sim lock patch tool. When I try to load the file I got from my phone using XS++ I get the following message:
When I connect my phone in XS++ I get the following output:Code:"C:\Backup\K790_35220801xxxxxx_GDFS_BACKUP.bin" is not a valid firmware!
Does anyone know what I'm missing?Code:16:16:08| Baseband ID: 9900
16:16:08| Protocol Version: 3.1
16:16:08| Phone name detected!
16:16:08|
16:16:08| Profiling SEMC phone...
16:16:08| Platform: DB2020
16:16:08| OTP CID: 51
16:16:08| EROM CID: 52
16:16:08| EROM Color: Red
16:16:08| IMEI: 35220801xxxxxx
16:16:08| Phone ID: K790
16:16:08| Region: ROGERS
16:16:08| CDA: CDA102535/306 R19A
16:16:08| Firmware Version: R1JC002
16:16:08| EROM: R3A022
16:16:08| Ready for operation!
That file is a GDFS backup and not a MAIN firmware. You need to use this file: K790_R1JC002_MAIN_GENERIC_EV_RED52, and it will be OK.
:) Is working for K610i Sony Ericsson.
Thank You :)
19:27:59| XS++ v3.1 (Darwin) Ready !
19:27:59| Executed on Microsoft Windows XP
19:28:18|
19:28:18| Attempting to open the interface...
19:28:18|
19:28:18| TURN OFF PHONE!
19:28:18| Hold 'C' button on phone and connect phone NOW.
19:28:18| You have 30 seconds...
19:28:18|
19:28:35| Baseband ID: 9900
19:28:35| Protocol Version: 3.1
19:28:35| Phone name detected!
19:28:35|
19:28:35| Profiling SEMC phone...
19:28:35| Platform: DB2020
19:28:35| OTP CID: 51
19:28:35| EROM CID: 53
19:28:35| EROM Color: Red
19:28:35| IMEI: 35958401xxxxxx
19:28:35| Phone ID: W660
19:28:35| Region: EUROPE_4
19:28:35| CDA: CDA102804/4 R5A
19:28:35| Firmware Version: R8BE001
19:28:35| EROM: R3A022
19:28:35| Ready for operation!
this is my log from xs++ since it's cid 53 i can't do anything huh?
NO
Please read the posts in these forums before posting posts that have already been answered numerous times.
Lavondys
Top Sony Team
NO cid53 phones CANNOT be patched atm.Quote:
Originally Posted by Sushiman
Thanks, but how to unlock 51 CID k55o phone, trying k++ to change the cid 52 but can't do that ?
ah i dont know about any k++ , but XS++ is supposed to upgrade your CID to 52.
if that doesn't work there is a manual script for it, download that and put it on your phone using setool lite.
RaBBiT:
First of all install the USB Falash Driver. Then connect the phone to XS++ v3.1 and when it ask you if you want to upgrade the CID to 52, press the Yes button.
Hey simox...great thread.
I'm tryin to unlock my W580. But i don't have the qamaker folder or exe file you talk about in the section for applying the quick access patch. What should i do? This is all new to me so haven't a clue about it!
Thanks alot
That you will find in folder SEtool2Lite and you can download Setool from hereQuote:
Originally Posted by blackswan
Top Sony Forums
You need the SETool2 Lite v1.11. Only this version contain the qamaker. You can download it from RapidShare: 1-Click Webhosting for e.g. Or just search for it, you will get a lot of hits.
Got it...brilliant! Thanks a million!
Hey there :)
I was just wondering, I followed the exact steps (and actually tried with the MAIN GENERIC and NAM one) on my S500i that is CID52 and it didn't seem to work... SETool Lite still claims it's network locked, and I can't used my sim :( And all the process went smoothly, now I'm completely clueless why it wont work :( could it be a problem with the GDFS?
this is what the IDENTIFY log gives me:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35988*********** CERT:RED
FLASH CID:52 COLOR:RED
Model:S500i
MAPP CXC article: R8BE001 prgCXC1123465_NAM_1_LY
MAPP CXC version: R8BE001
Language Package:HONG_KONG
CDA article: CDA12345678/123
CDA version: R2A
Default article: cxc1123328
Default version: R8BA024
Network LOCKED
Operator: 505-02
Elapsed:1 secs.
EDIT: Theres seems to have no custo pack for the R8BE version, I guess I absolutely need to use R8BA then?
i test SIM_lock_remover patch generator for R4EC001 in k510, but it not work. anyone unlock file R4EC001 in k510?
excuse me for my bad english.
Spirit:
Even if the phone is unlocked by patch, it will 'think' that the phone is locked, because it reads the locks info from GDFS but the patch alter the MAIN firmware. So it is absolutely a normal behavior.Quote:
SETool Lite still claims it's network locked,
What is the error message do you get?Quote:
and I can't used my sim
mba2431:
Please give us more details. SIM-lock Patch Generator is unable to generate the patch? What CID has your phone? Or SETool2 Lite gives you some error message?Quote:
i test SIM_lock_remover patch generator for R4EC001 in k510, but it not work.
SIM-lock Patch Generator generate patch. my CID is 49 red. setool2 give no error message.Quote:
Originally Posted by simox
but when i patch vkp, all 5 lock is locked.
OK then, please post the log when you applied the patch. By the way, have you get some bytes mismatch or similar error message?
this time that i patch vkp, my phone totally dead (pressing power bottom no action and phone no turn on)Quote:
Originally Posted by simox
my log:
my phone identify after patch:Code:Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238********* CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
can't open file "E:\Users\AMINI\Documents\Downloads\Compressed\setool2lite\rest\R4EC001_CXC1250231_GENERIC_CO"
Starting to process VKP patch script: E:\Users\AMINI\Documents\Downloads\Compressed\K510\vkp\Remove_SIM_lock_K510_R4EC001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44D80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:47 secs.
Code:ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238********* CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35579*********
Model:K510i
MAPP CXC article: R4EC001 prgCXC1250231_GENERIC_CO
MAPP CXC version: R4EC001
Language Package:S_ASIA_LEVAN
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250246
Default version: R4EA031
Operator: 000-00
USERCODE:0000
RESTORATION FILE NOT PRESENT
"R4EC001_CXC1250231_GENERIC_CO"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
Elapsed:1 secs.
Don't worry, your phone isn't really dead, and it can be easily revived ;) The problem is that there is no restoration file in [SeTool2Lite_folder]\rest folder for your MAIN. However you can make one with [SeTool2Lite_folder]\make_rest\ssw2rest.exe
Open a command prompt and invoke it as:
You will get a R4EC001_CXC1250231_GENERIC_CO file in [SeTool2Lite_folder]\make_rest\ folder. Copy it to [SeTool2Lite_folder]\rest folder. Reflash the MAIN firmware, then apply the unlock patch again. If everything goes well, the phone will work and will be unlocked too.Code:ssw2rest [path_to_MAIN]\K510_R4EC001_MAIN_GENERIC_CO_RED49.mbn 44140000
thanks mr simox. but when i flash main and patch vkp, my phone stuck in "PLEASE WAIT".Quote:
Originally Posted by simox
help me please...
When a phone stuck at "PLEASE WAIT" screen, it is usually a GDFS problem. I hope you made a GDFS backup, before any flashing/patching attempt. Restore that GDFS backup(but DO NOT flash any other GDFS) and it should work.
By the way, and if you only flash the MAIN without applying the patch do you still get that "PLEASE WAIT" screen?
i did backup my GDFS by phone xs but now i flash it by SETOOL get this error:
Code:ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238********* CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1091 variables
gdfsWrite err:11,block:1,unit:3CA
gdfsWrite err:11,block:3,unit:FAF
gdfsWrite err:11,block:3,unit:138F
gdfsWrite err:11,block:4,unit:1778
gdfsWrite err:11,block:4,unit:1B6D
gdfsWrite err:11,block:5,unit:1F54
gdfsWrite err:11,block:6,unit:2720
gdfsWrite err:11,block:6,unit:2726
done
Phone detached
Elapsed:132 secs.
Try to restore the GDFS with XS++. If doesn't works, then reflash the phone completely(MAIN, FS, custom pack), and then restore the GDFS.
hey there,
since a friend got a new mobile phone, he gave me his old K800i with O2-network addiction. I have a T-mobile SIM, so I wanted to unlock it. I tried it as good as I could considering it is my first time doing something like that. But thanks to the great guide here, I made my way through it. The problem is: It doesn't work. I'm still asked for the phone lock code.
As for the SeTOOL Logs:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701925139 CERT:RED
FLASH CID:52 COLOR:RED
Model:K800i
MAPP CXC article: R1CB001 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1CB001
Language Package:EUROPE_2
CDA article: CDA102511/74
CDA version: R7A
Default article: cxc1250490
Default version: R1CB001
Operator: 000-00
Elapsed:201 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701925139 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1593
Found:672 variables
Found:628 variables
Found:199 variables
Found:94 variables
GDFS read all done, GDFS_35170701925139.BIN written
Phone detached
Elapsed:45 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517blablabla CERT:RED
FLASH CID:52 COLOR:RED
Model:K800i
MAPP CXC article: R1CB001 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1CB001
Language Package:EUROPE_2
CDA article: CDA102511/74
CDA version: R7A
Default article: cxc1250490
Default version: R1CB001
Operator: 000-00
Elapsed:1 secs.
____________________
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170blabla CERT:RED
FLASH CID:52 COLOR:RED
Model:K800i
MAPP CXC article: R1CB001 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1CB001
Language Package:EUROPE_2
CDA article: CDA102511/74
CDA version: R7A
Default article: cxc1250490
Default version: R1CB001
Operator: 000-00
Elapsed:7 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170blabla CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517blabla CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Dokumente und Einstellungen\deadz\Desktop\K800_R1KG001_MAIN&FS_E UROPE_2_RED52\K800_R1KG001_MAIN_GENERIC_WI_RED52.m bn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Dokumente und Einstellungen\deadz\Desktop\setool2lite1.11www.se-tuning.net\qamaker\quick_access_K800_R1KG001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C40000
New block #0002 added: $45C80000
Blocks selected OK. Reading blocks: 3
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
VKP script executed OK
Elapsed:782 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170blabla CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Dokumente und Einstellungen\deadz\Desktop\SIMLockPatchGen_v2.1\S IMLockPatchGen\vkp\Remove_SIM_lock_K800_R1KG001.vk p
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:26 secs.
__________________________
So where is my mistake and what can I do? :confused:
Phone lock code (like you write) or SIM lock code ?
I put my SIM-card into the phone, turn it on, enter my password for the SIM-card and then the phone asks me for the "phone lock code".
That means- your phone is locked. Ask your friend for phone lock code( you can reset phone lock code - if you forgot PIN with XS++)
He forgot it...
How do I do the reset with XS++? Could you be so kind to tell me or give me a link to where I can find the answer?
Thanks in advance!
EDIT: Nevermind, found it myself.. had a typo in my search.
It works now! Big thanks to Simox & Seamonkey!
how can i copy the firmware of my w850i and patch it using simox SIM-Lock remover patch generator
You must to download a W580 MAIN firmware. If you post an identify log, we can tell you exactly what firmware you need.
sorry im to all this ? is this what u mean?
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601051370 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:4 secs.
it wont switch on ?
its a w850i on vodafone
plz help i need to fix so i can patch unlock plz
Try with XS++ and post log here without IMEIQuote:
Originally Posted by super-pat