Flash your phone and How to apply or remove patch using SETool 2 Lite

Thx.
By reading this thread I've learn how to patch :D

For some Problems you can look at gulliboard.com but the most is in German

But it is a cool site.

nice one jasmin i already got the setool2lite and the remove simlock generator now looking for the bin file.keep it up!!!

my phone can not turn on how do?????

my infrared phone always is eink how do to fix it???????
if my phone is hang

You mean this : a blinking red led in the infra red port.

REPAIRING EROM GUIDES for most sonyericsson phones

Nice day

it sounds that ur EROM has been damaged... i myself have got the very same problem and am busy in tackling it... not yet successful :(

kk here we go everyone.
I have tried this method twice on my W850i to apply vkp patches but everytime after i finished adding the quick access patch to it, everything happened successfully but when i turn my phone on it just flashes with white screen. Please help me out because I want to apply patches on my phone.

the guide doesnt work on my commie it shows up laods of codes in the notepad file i download :( anyone help?

Worked for me

if i do that, am i gonna still be able to use the same company sim card????

if i don't have SETool 2 lite 1.10 do I still have to download 1.10 and upgrade it to 1.11 or can I just download 1.11?

Quote:

---

Originally Posted by EzZn0

if i don't have SETool 2 lite 1.10 do I still have to download 1.10 and upgrade it to 1.11 or can I just download 1.11?

---

You can just download:

SeTool 2 Lite 1.11 with video tutorials

Nice day

My friends W810i was bricked, he flashed gdfs from different phone. Now, even after Main and FS reflash, plus otp-gdfs 7 simlock patch were applied, the phone can only show SE logo... and only @ about 30% if i use "patched" main. Main & FS are R4EA031. We don't have enough money to send it to repair shop, or buy SeTool3 box (or sth like that). What do we do now?

I did it, following instructions at
W810i - No Solutions? - SE-NSE Forums

Still not successful

hi my phone w810i r4db005 this elf please

hi
please elf patsh for r4db005
please

anyone can help me?

my phone is dead..
not 'fully' dead..

after i turn it on,
it shows start up screen,,flight mode o not..then sim card pin code,,
after that,,it only show

Quote:

---

configuration error.
please contact your
network operator or
service center..

---

i tried to flash it back,but there's no change..
these happen after i try to apply quick access to my fon..

k550i flashed to w610..

help me!!

Upload a custom pack, and problem solved. Check this guide how to flash a SE phone properly: XS++ 2.x Guide

Don't press "C" button, but 2 & 5 at the same time, when phone is out. Good luck.

Is still don't get it how to remove patches from phone?

Quote:

---

Originally Posted by smajo

Is still don't get it how to remove patches from phone?

---

It`s the same way when you applied patches, only When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on Yes button.

Nice day

I want to remove patch what I do ?

this is enough to click yes ?

It`s the same procedure like by applying patchs , only difference is When a dialog pop-up, click "Yes" to remove the patch.

Nice day

Began to understand a bit

I just remove simlock on my w580

IS this program easy to control or use?

Yes.

Nice day

Quote:

---

Originally Posted by jasmin

Flash your phone using SETool 2 Lite

Step 1: Shut down your phone and open SETool 2 Lite.
Step 2: Choose your phone model.
Step 3: Press the ADD button and select the Main&FS files (.mbn & .fbn). MAIN and FS can also be bin files. In fact the only important thing is that, they're unencrypted.
Step 4: Select the archive with the customization files (.zip).After it is recognized by the program , in the left side will appear informations about the customization.The archive(.zip) contain files from tpa/preset/custom.
Step 5: Press the FLASH button.
Step 6: Connect the usb cable while holding down the "c" button un your phone. Then wait for the process to finish.
Step 7: Disconnect your phone , get the battery out for 5 seconds , reintroduce it and start up the phone.It will appear a screen with "Please Wait...", wait 1-2 minutes and then the phone will start normally.

---

Sorry if this too much of a n00bish question, but does the 'C' button have to be pressed continously (in Step 6 above) until the flashing process is complete?

can it change the language of the phone

Quote:

---

Originally Posted by airfoil

Sorry if this too much of a n00bish question, but does the 'C' button have to be pressed continously (in Step 6 above) until the flashing process is complete?

---

NO it doesnt have!

anybody know how to add chinese input to my w580i? or at least be able to read chinese

Quote:

---

Originally Posted by cutiepie

anybody know how to add chinese input to my w580i? or at least be able to read chinese

---

Flash your Firmware. You can download it at firmware download section. Choose one with chinese language

anybody has which version of Setool may work with my k810i CID53?

None. Only Farmanager with JDFlasher works with cid 53 phones.

Nice day

i have trying to flash my phone for 1X hr.......
i will try your way...........

cuty pie. flash your phone with XS++. latest firmware for your phone is W580_R8BE001_MAIN_HONG_KONG_LA_RED53, W580_R8BE001_FS_HONG_KONG_RED53. it has chinese on it. BUT i recommend W580_R8BE001_FS_HONG_KONG_RED52 , W580_R8BE001_MAIN_HONG_KONG_LA_RED52 . good luck

SE tool dont support CID 53 yet

i use a k810i.
the mistake is i just upgrade firmware from SEUS so i got the cid53.
it cant flash to patch. so...can i flash cid53 to cid52?

Quote:

---

Originally Posted by Guy68

i use a k810i.
the mistake is i just upgrade firmware from SEUS so i got the cid53.
it cant flash to patch. so...can i flash cid53 to cid52?

---

No you don't.There are no way to downgrade your CID