I have update with 2.99 driver from first post, but the phone still says 2.96.
Anyone have similarly problem?
Printable View
I have update with 2.99 driver from first post, but the phone still says 2.96.
Anyone have similarly problem?
good, very good driver. At first you need to make use of all functions(video-zoom, Best-Pick etc....), after it works very good.
Well done.
Ok thanks, I thought that's where it was suppose to be listed. Apparently when I flashed it using setool2 lite 1.8, it didn't work and for some reason my display driver changed, why I dunno, it's a new number in it now.
I tried using the setool lite method posted and it didn't work, but if you use the x++ method, it works fine
these drivers are amazing, and so many updates :D
keep up the great work.
can install thru xs++? coz i dun think FARmanager supports k800
I have a little problem with this camdriver, when I take a photo with my k800 flashed with k810 firmware (with Number1 2.99 camdriver) it take a very long time to be registred, while with a non-flashed k800, it don't take a long time! please there is a solution?
thx..... testinggg
Hey mate, which it the correct vga drivewr for front cam?
When I click the link there 2, (2) camdriver1.dat = 20kbs and camdriver1.dat = 10kbs?
i'd already use it, is there still a bug? couse when apply zoom, there no clear image...
and something else
or i must flash the firmware to k810 (mine k800) before ??
i haven't get di acces yet!!
new special edition driver in first post :eek:
new driver in the first post
This wont work for me, i've put the file on itf->settings->camera but when i start the camera it turns off immedietly :/
I have 2 files in that directory;
"camdriver0.dat"
"camdriver1.dat"
I've downloaded 2.5BETA and i get the file "(2)_camdriver1.dat". I've tried renaming to "camdriver0.dat" and replaced the old one but the camera still wont work!
Any help would be appriciated.
2.5 is for the front cam of the k800&k810, just download 2.99.9 SE2 and follow instructions on how to install it don't rename nothing.
i tried number1 and ultimate, in my opinion your driver is better :)
2.91 added to first post
So what will be the best driver to use with my k800i?
Number1 2.9 final?
Any problems with the video running at 22fps?
Thanks.
Best camdrivers are from number 1 .
Now there is a new version of this drivers:
N1 3.0 SM, Camdriver for k790/k800/k810/k818 camdriver, & N1 2.5 Final camdriver1
Nice day
Can you confirm please it will work fine on k800 flashed to k810 ?
It works fine!! Just do it!
i did 2.99.9 SE2
everything is ok...
when i check my camera version throw the secret menu.. it says it is 29.99 not 2.99.9 SE2 .. is it right?? or i have a bug??
What's the BEST number1 camdriver?
is it 2.9 final, or 2.99.9 SE2 or some other driver?
The best for now is 3.01.
2.91
-fix bestpic bug and video fps,
-fix commend read & set-reg,
-fix flash
2.92
lower video fps to 21fps for less bugs,
fix jpeg retry,
better flash pics,with better colour
improve compression,
improve night video recording
2.93
-reduce colour saturation
-better whitebalance for night modes
-better compression with bigger file sizes on fine quality
2.95
-reduce exposure slightly
-less colour sat on flash pics
-21fps video no zoom bug
-bestpic bug reduced
2.96
-fix portrait focus,
-whole new compresson & jpeg settings with corrected values,
fine mode = 100% compression & my calculated file sizes
normal mode = 95% compression & file sizes as fine mode in standard driver
-flicker correction update added
2.99 last update
-twlight protrait scene is lighter with iso 400
-portrait scene is lighter with 1/5 and no iso limit
-flash pics have correct colour saturation value
-all scenes have correct sharpness values
-bestpic bug reduced
-video fps redone, still 21fps
2.99.5pecial edition
-Driver tidyed up overall size decreased, some code from Raiderski's prototype (v2) used.
-advance compression system with first & last quality & retry,
-twlightlight portrait now has 1/2 sec shutter for flash & iso 250
-portrait is 1/30 sec shutter for flash with iso 250
-normal is 1/20 & iso 320
-new Exposure property
-portrait limited to iso 500
-tungsten whitebalance on flash pics to remove redness
-macro flash iso is 125
-cam_i2c_clock_freq is 100KHZ
-bestpic bug reduced
2.99.9 SE2
- INCREASED sharpness to 03 on auto mode & correct sharpness values for other scenes
- tidy up more code camdriver0.dat is now 38kb
- correct the compression system
- fix document mode maxium shutter speed is 1/8 @ 7,5fps, document mode didn't like 1/6 shutter @ 6fps also fixed document mode flash
- edited the jpeg q table slighty for better compression.
- entire flash settings redone, colour is correct so no more redish tint & focus is correct so no more smeared pics.
*normal mode is 1/25 iso 320
*macro is 1/30 iso 160
*document is 1/40 iso 100
*portrait is 1/30 iso 250
*twilightportrait is 1/2 iso 250
3.0, changelog changes from last version (2.99.9 Se2)
-modes on effects (24 new modes)
-new jpeg q table
-doc mode flash shutter now 1/50
-video 21fps.
3.01,
changes from 3.0
- sports scene mode 3 changed, now iso 400 mode with manual shutter speed set shutter speed with the joystick - iso 200 for flash on normal scene mode 3
- iso 250 for flash on normal scene mode 2
- saturation reduced to 06 on twlight landscape mode 2
- sharpness reduced to 05 for landscape scene mode 3
- sharpness increased to 04 for sports scene mode 2
- iso 160 for flash on nightportrait scene mode 3
- iso 200 for flash on nightportrait scene mode 1
Nice day