Re: W580 after flashing is not working
As I suspected, the GDFS back up was damage and is not installing due to a failure. I downloaded a GDFS from the topsony site and this the message:
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1288 variables
done
Phone detached
Elapsed:98 secs.
But this GDFS does not work for my phone
Re: W580 after flashing is not working
ur phone can be fixed with D-Ultimate Unlocker cost ten euros to do it if u buy a log then give me a shout will run u though it
Re: W580 after flashing is not working
I bought it, what should I do?
Re: W580 after flashing is not working
right now u have to wright the clean gdfs u downloaded from the down load area with se tool holding the 2and 5 button like u did then close se tool and open D-Ultimate Unlocker then make sure u put ur user name and pass word in ie (user***) then save settings press check creidts to mske sure it working if so then press restart the pick ur phone from the list then pick full unlock and reset sec units make sure both boxes are ticked top right hand side then take the battry out off ur phone put it back in hold the 2 and 5 button and plug ur usb lead in then follow what it tells u in the box when u have done this ur phone ill be fixed and unlock but u may still get the same err that u had b4 so then pick a custom pack for were u live kep it in rar fourm and flash it to ur phone with se tool lite if u get stuck just ask
Re: W580 after flashing is not working
Thanks it works, but now I went back to the configuration error message when I put the sim card. I am from PR and the phone is from ATT, I tried several custom package before so I would like to make sure which one to use.
Re: W580 after flashing is not working
I dont think there is one in the download area att files are realy hard to find
Re: W580 after flashing is not working
I found it is W580i_CDA102774_102_R25A_ATT_USA but I can't find the way to install it using the SE tool. I tried X++32 but it have its own packages. Can you let me know the procedure to do it?
Re: W580 after flashing is not working
add it in rar fourm to the mics box then press flash
Re: W580 after flashing is not working
Thanks a lot, I start looking last night on all the thread and found the link that explain it.
Flash your phone using SETool 2 Lite - Top Sony Forums
Thanks you again, the phone is finally working.
I have another question. If I program another w580 with the generic Main, FS and the zip file, I will not unlocked. Is there any other thing to unlocked for free or should I need to buy another log and use d-ultimate unlocker
Re: W580 after flashing is not working
IF U USED d-ultimate unlocker BTO FIX UR PHONE IT SHOULD BE UNLOCKED :confused: