Flash your phone and How to apply or remove patch using SETool 2 Lite

You need this guide : Flash K800 CID53 with K810 software CID53 (for begginers)
Please specify phone model

What about W910i?? How can I unlock this?? and with program?? Please help me

Finndo

Can your friends and upload here the tutorial explains how and what is meant by files VKP, Patching, Simlock Remove it, thanks

Quote:

---

Originally Posted by jasmin

Look at step one ( Shut down your phone and open SETool 2 Lite. ).
All files are in download section.

Nice day

---

hi! jasmin, u 've provided link, it will get struck at 65% during download, plz can u give another link for setool2lite 1.11.

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.01
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3565*********** CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4CE012 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4CE012
Language Package:
CDA article: ذ
CDA version: ذ
Default article:ذ
Default version:ذ

Network LOCKED
Network subset LOCKED
Service provider LOCKED
Corporate LOCKED
Extended LOCKED
Operator: MULTIPLE

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:10 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102555/6
VARIANT:M_EAST_N_AFR
LANGUAGE: EN
LANGUAGE: AR
LANGUAGE: FA
LANGUAGE: FR

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35************ CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4CE012_CXC1250316_GENERIC_HN
Restore from:R4CE012_CXC1250316_GENERIC_HN
Setting up GDFS...
format gdfs complete.
will write 67324752 variables
cut length from 3657433088(0A/0000)
FAIL: gdfs blk/unit:10/0000
Exception in GDFS write. maybe bad gdfs file.
Elapsed:57 secs.
Please help what is best MAIN FS misc files (Customer) to Download
When I run MY W810I
Show
Plese wait
and Remain that way

sure you have fully charged
battery. And again do fullflash.
First with FS and later MAIN.

I have this problem : K810i locked to Orange - i unlock it with setool2 1.1 but i after that i decide to debrand it by flashing with (R8BA024) old was (R6CA001_FS_ORANGE_GEN_RED52). After flashing phone was locked again to orange .I've try to unlock by patching but setool says that their is some different .... this message i receive from setool and two choises yes or no and after than phone dies .What should i do ?

hi,
can someone help me i have a sony ericsson model k810i. my IMEI:35799401182286650 and i have put a o2 sim card in but its saying inactive sim also tried vodafone and giffgaff still no joy. my phone is on o2 but still saying the same
must be locked on o2 how can i open it up on all networks,
i don't have a memory stick or or owt so is there any way i can do this.
PS am not very good with phones so must be easy to follow,
thank you in advance..

Post here log from your phone.You can see instructions in 1st post in this thread.