try with a fully charge battery
Printable View
try with a fully charge battery
SE w518a Issues:
Ok my friends, help me out a bit here.
I just upgraded my (beloved) w580i to the w518a (mostly as it has a better camera and I couldn't afford the Sony Cybershot, lol)
So here's the BIG problem - the blasted center button auto-connecting to MediaNet (which I NEVER use). I've yet to find very much info on the w518a. Feature and usage-wise, I'm fine with everything BUT this blasted Media Net. I contacted AT&T and they said it was an SE issue - contacted SE and (using an UNBRANDED version), they said the button to them straight to settings, so that it was *definitely* an AT&T branding issue. I'll be raising some hell with AT&T over this. My question is this: is there a way to change this without de-branding, or i that my only way to go, and if so, HOW do I go about unbranding it and locating the appropriate firmware?
I have checked with upper AT&T techs and they said that they are not aware of any way to change this, and did not know how to go about contacting the development (firmware) department. Going to attempt to contact upper echelon of AT&T Wireless regarding this issue as it *really* p**ses me off. If necessary, I will see if I can get them to give authorization to SE to provide me with an appropriate unbranded firmware. I'd rather not have to do this, but if they leave me no choice .... (and for those of you who think I can't get it done the "hard" way, lol, you don't know me).
I'll keep everyone posted on the progress, but if anyone knows of an easier way, I'd sure appreciate knowing about it
Unbranding is *not* my first choice - I remember the issues with unbranding the 580 - like turning IMs into data instead of text, etc. I'm also VERY irked at this 300k MP3 limitation. I went through a LOT today to get this phone, and I'm going to be even more ticked off if I find that the only thing this phone has over my 580 is the 3.2mpx camera vs the 2mpx. Not a happy camper at this point.
===========
I am waiting to hear from the developers at AT&T (yes, a message was sent to that dept).
In the meantime, I have seen that Ultimate Unlockers 4.01 indicates "Instant Full Unlock of DB3200 & DB3210 CID53 supported" and I have read that the w518a is a DB3200 CID53.
I have located several firmwares for the 518a -
W518a_1220-7732_R6A_ATT_USA
W518a_1220-7732_R7A_ATT_USA
W518a_1220-7732_R10A_ATT_USA
W518a_1220-7732_R12A_ATT_USA
W518a_1220-7732_R14A_ATT_USA
How can I tell which firmware is the appropriate one for my system?
Thanks!!!!
---Dragon77
What do i need to download?...what firmware do i need?Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35777401313338 CERT:RED
FLASH CID:52 COLOR:RED
Model:W880i
Brand:Vodafone
MAPP CXC article: R1JC002 prgCXC1250641_VODAFONE_AI
MAPP CXC version: R1JC002
Language Package:VFE_LIVE_2
CDA article: CDA102719/122
CDA version: R3A
Default article: cxc1250651
Default version: R1JC002
Network LOCKED
Operator: 234-15
Elapsed:6 secs.
please tell us what is your problem first and we will help you
thank you thank you thanks a lot this tutorial has helped me unlocking my k800i
i am very happy
thanks a lot simox
Hmm..
Location : UK
Provider : T-Mobile (Was an Orange provided phone which was unlocked)
Reason for this action.. Phone suffered White Screen On Display issue.
Phone : K800i
Main firmware used : K800_R1CB001_MAIN_GENERIC_WI_RED52
FS Firmware used : K800_R1CB001_FS_EUROPE_2_RED52
Firstly.. Simox.. such a wonderful guide you have provided and the work you have put into it.. WELL DONE!!
Secondly, and it's sad..
Followed your guide to the letter... and had failure, phone temporarily bricked.
Here's the last (more or less) of the setool responses.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
LDR: DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Anonymous\Desktop\Phone shit etc\SetTOOL Lite\qamaker\quick_access_K800_R1CB001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:482 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:5 secs.
As with everyone, all I want is my phone working again
Need unlocked UK service with T-Mobile sim card.
Anything I am doing wrong?
Please ignore last message..
I changed MAIN and FS firmware, went through the guide once again
and it WORKED!!!!!! Unlocked working K800i again..
[bows before Simox]
Hi Simox, I am having a bit of trouble with the Remove_SIM_lock_W580_R8BE001_GENERIC.vkp. It never makes it to the apply yes or no option. This is log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BE001
Language Package:AMERICA_2
CDA article: CDA102568/107
CDA version: R8A
Default article: cxc1123364
Default version: R8BE001
Network LOCKED
Operator: MULTIPLE
Elapsed:5 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\W580_R8BE001_MAIN_GE NERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\quick_access_W580_Ma in_ Generic_LA_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:949 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
Loader not responding !
Elapsed:42 secs
I am re-flashing everything and I hope it will work this time. Any help would be appreciated.
Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock
Well i tried it again and it did the same thing. Its not unlocked and same problem. What am I doing wrong? Anyone??
Guys, need help with Far manager (JDFlasher), when i try to open oflash to flash my W660 (it has R8BB001 flash atm) with R8BE001 so i can unlock it, JDFlasher gives me this error...
http://img190.imageshack.us/img190/9750/farerror.th.jpg
Can someone help me? :eek::eek:
JDFlasher can read the mobile, but it can't open the oflash dir so i can flash it with main R8BE001.
I tried reflashing the mobile with SE program but with no luck, after it reflashed, JDFlasher still keep giving the same result... :(:eek::(
Ok I fixed it myself. Used Far Manager+JD Flasher. F11 then connect using JD Flasher. Double click BFLASH and follow instructions. Asked me to remove battery 4 times and reconnect. After that it says to flash main first. I did. Then Flashed VKP file. Then hit .. until you get this: Warning Are you sure, Click Yes. Restarted phone and its was unlocked. I dont know why Setool2lite would not work but FAR did it after trial and error.
:p:rolleyes:
I have w850i .. and unlockeeeeeeed :))
thank youuuuu so muchhhhh :)
the last step (B. How to apply the generated patches to DB2020 CID52 phones) doesnt worked for me.. just with farmanager and jdflash :)
(sorry for my english..im hungarian)