Remove SIM-lock patch generator

i dont have a MAIN firmware file
do i need to download or soemthing?
sorry for constant questions

here the log

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Xhui\My Documents\Sony w580i\qamaker\W580_R8BA024_MAIN_HONG_KONG_LA_RED52 .mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Xhui\My Documents\Sony w580i\qamaker\quick_access_W580_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C40000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:1498 secs.



Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Xhui\My Documents\Sony w580i\SIMLockPatchGen\vkp\Remove_SIM_lock_W580_R8B A024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:27 secs.

just unlocked phone special thanks to simox for his program justme and the windows tweaker
thanks guys :D:D:D

xhui
Sorry for late reply...
It seems that not the patching is the problem. Reflash completely your phone(MAIN, FS, custom pack) and unlock it again.

batesy3
I'm glad you succeded :)

Thank alot! it works :D

The guide is very helpful.

Thanks alot! Managed to unlock my (already unlocked before) T-Mobile W850i after successfully f*cking it up whilst trying to patch it!

Again, thanks a lot :D Didn't know this was possible without special software / cables.

@simox I try to unlock Z310, but:

http://img151.imageshack.us/img151/3048/01fz4.jpg

Platform and cid of sony ericsson phones

This platform is not supported yet ( at the moment you can apply patches to DB2000/DB2010 CID36/49 and DB2020 CID52 platforms only. )

Nice day

Just wanted to let you know that I did manage to unlock a SE K610I following yr instructions.. Thks..

i will try to unlock my w880
but i dont have a flash file
help me

i dont have a MAIN firmware file
do i need to download or something?

You need to download , but first you need access to download section.Look here:

How to get access to download section

Nice day

Has anyone tried this for the w580 and does it work?

Yes, it works.

Nice day

when i hold the c key it does nout

ok when i use "quick access" it turns my phone on and gos to file transfer
and if i dont it puts it on but my phone dont turn on
what should i do?

thanks but this is a bit complicated
but i'll work it out

Quote:

---

Originally Posted by mrbonno

when i hold the c key it does nout

---

You use setool lite, right. Tried with this combination 2 + 5 to connect.

Nice day

Why it's not possible to create patches from *.CRY flash files. The original SE tool use this flashes.

It Is Because These Files Are Encypted And Can Be Decypted By The Software Itself Like *.dvt For Davinci, *.wtn For Wotan And Similarly *.cry For SeTool.

im struggling with Setools, i connect my phone to my usb click read GDFS and nothing happens.

My phone was recently repaired so i guess it's got the latest firmware on it, how can i tell what version of firmware im running? Could this be causing a problem?

Should the phone be in phone or file transfer mode when attached to my PC?

Thanks

Daz

Quote:

---

Originally Posted by daz_75

im struggling with Setools, i connect my phone to my usb click read GDFS and nothing happens.

My phone was recently repaired so i guess it's got the latest firmware on it, how can i tell what version of firmware im running? Could this be causing a problem?

Should the phone be in phone or file transfer mode when attached to my PC?

Thanks

Daz

---

If you want to connect to setool you should turn of the phone and then follow what setool says.

Nice day

Hi all,

Ive just tried this method to unlock my K800, and now when the phone boots up, it comes up with a error message which reads:

"Configuration error. Please contact your network operator or service centre"

Any ideas what could be causing this problem? Ive tried it twice and the same result happens. When I flash back to R1KG001 Generic firmware, the phone starts up fine (although is sim locked).

Thanks

You need to customize your phone. Here is a flashing guide: XS++ 2.x Guide.

work with w880 or not?

What is Remove SIM-lock?

after flasing my w810i comes up with a red screen and says! please wait
with a progress bar under that, it gets 1/4 way up and stops. left it all night untill my bat went flat, still the same, can anybody please help me on this, or do i put it in the bin. this is my read out of the phone

Welcome to SEtool2 ( LITE edition ) v 1.11

supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233701703410 CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35906400043902

Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_2
CDA article: CDA102494/133
CDA version: R1A
Default article: cxc1250324
Default version: R4DB005

Operator: 000-00

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:7 secs.
many thanks to all replys

Quote:

---

III. We will apply the generated unlock patch to unlock the phone.
With SETool2 Lite v1.11:
1. Click on Clear button.
2. Select your phone model.
3. Tick Use "quick access" patch checkbox
4. Uncheck(remove the tick from) Bypass DB2020 security checkbox.
5. Click on ... (three dots) button near MISC files box, and select the vkp file generated by SIMLockPatchGen.
6. Click Write SCRIPT button
7. Follow the instructions in left status window...
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

---

I can't get this part to work!!! WHen i press C and plug in phone the phone starts up automatically and it wants to install w580i software..(my phone is w500i flashed to w580i)

Also i ignored this step:

Quote:

---

2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.

---

What qmaker?? I just put main firmware in that folder (i had to create one)

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\ANNJENN\Desktop\unlock\qamaker\W580_R6BC0 02_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\ANNJENN\Desktop\unlock\SIMLockPatchGen\vk p\Remove_SIM_lock_W580_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:638 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:46 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:74 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:53 secs.

Hi.
I have just tried this method to unclock my k800 and now my fone comes up with a message:
- (Configuration error. Please contact your network operator or service centre)
I don't forget backup GDFS before flash fone :( Any ideas what could be causing this problem???

My FW: Main: k810-R8BA024-Generic
FS: Apac
Sorry English bad....

garyangi:
It looks like the GDFS is damaged. You need to restore the backup what you made before trying to flash/unlock.

davidw89:
Have you removed the battery from phone before that step? If you skip the qamaker part, then you will not be able to apply further patches... The SETool2 Lite v1.11 folder is the path to SEtool2 Lite v1.11 folder. e.g. D:\SETool2ltv1.11\ If you don't have the \qamaker\qamaker.exe in SETool2 Lite folder, then download another SEtool2 Lite v1.11...

Some people reported that SETool2 Lite doesn't works well with some phones, and they get: this embedded flashloader not responds ! The workaround is to apply the patches with jdflasher.

wangtuyen:
You need to customize your phone. A flashing guide: XS++ 2.x Guide.

I've flash my fone with sx++ 3.1 and everything it's OK
Now i not sure can add pacth with setool because when u want add pacth u must flash FW and pacth quitaccess by settol
??????

Quote:

---

davidw89:
Have you removed the battery from phone before that step? If you skip the qamaker part, then you will not be able to apply further patches... The SETool2 Lite v1.11 folder is the path to SEtool2 Lite v1.11 folder. e.g. D:\SETool2ltv1.11\ If you don't have the \qamaker\qamaker.exe in SETool2 Lite folder, then download another SEtool2 Lite v1.11...

---

yes i have!
Could u give me a SEtool2 lite v1.11 that has qamaker.exe in that folder?
Now my phone is screwed!!!!!!!!!!!!!!!!!!!!!! i can't get it to be detected in Setool2 OR xs++
sigh..i suppose i can repeat this step with the correct SEtool2 lite v1.11 and get it to work

Look use setool lite and when it ask to use the c - button to connect, then you use 2+5 button instead. It should connect your phone.

Setool lite with video tutorial

Nice day

how can i make my sim locked?!?

maybe it will happen years later

First, make sure you have all the necessary files.
Second, just follow the guide from OP. it's relatively easy if you have a DB2020 CID52.

Just make sure you follow the instructions exactly as stated. Don't deviate from them. You be in good shape in about 20mins max.

BTW, which phone you trying to unlock? If it's a w580. PM me, I can help w/ that.

wangtuyen:
So, you flashed your phone, and suppose you applied the custom pack too... You can unlock your phone with SETool2 Lite v1.11, just follow carefully(DO NOT skip any step) the unlocking guide.

davidw89:
Here is a working one: SETool2_Lite_v1.11.zip.jasmin already answered to other questions.

i think i didn't check "bypass db2020 security" when patch unclock my fone
Now my fone is OK

Thank Simox for help

i had 2 phones w810i one was faulty and the other was locked to orange, i backed up the wrong gdfs (the faulty one) i can see the problem with the missmatch imei, i have got a back up of the faulty phones gdfs, so can you edit it and change the imei No in the gdfs file and then put that on my phone (locked to orange), the faulty phone got put in a washer, and now the screen will not light up (no 14v) to light the screen (main board faulty) but will still turn on.
many many thanks if you reply
gary

Quote:

---

Originally Posted by simox

garyangi:
It looks like the GDFS is damaged. You need to restore the backup what you made before trying to flash/unlock.

davidw89:
Have you removed the battery from phone before that step? If you skip the qamaker part, then you will not be able to apply further patches... The SETool2 Lite v1.11 folder is the path to SEtool2 Lite v1.11 folder. e.g. D:\SETool2ltv1.11\ If you don't have the \qamaker\qamaker.exe in SETool2 Lite folder, then download another SEtool2 Lite v1.11...

Some people reported that SETool2 Lite doesn't works well with some phones, and they get: this embedded flashloader not responds ! The workaround is to apply the patches with jdflasher.

wangtuyen:
You need to customize your phone. A flashing guide: XS++ 2.x Guide.

---

garyangi says
i had 2 phones w810i one was faulty and the other was locked to orange, i backed up the wrong gdfs (the faulty one) i can see the problem with the missmatch imei, i have got a back up of the faulty phones gdfs, so can you edit it and change the imei No in the gdfs file and then put that on my phone (locked to orange), the faulty phone got put in a washer, and now the screen will not light up (no 14v) to light the screen (main board faulty) but will still turn on.
many many thanks if you reply
gary