Did you followed any tutorial? Try again following this one: How to apply patches with SETool2 Lite V1.11.
Printable View
Did you followed any tutorial? Try again following this one: How to apply patches with SETool2 Lite V1.11.
i have done, but one of my phone is die, when i Click bypass db2020, after fllash my phone can not start = die :confused:Quote:
Originally Posted by simox
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Jason\My Documents\W580_Collection\XS++\sim\SIMLockPatchGen \vkp\Remove_SIM_lock_W580_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:13 secs.
help
First reflash your phone, and make sure that it is working. Then unlock it following carefully that tutorial.Quote:
Originally Posted by feuer
jay_mckee@
Follow this tutorial:How to apply patches with SETool2 Lite V1.11.
Edit:
Check the first post of this thread. You will get a step by step tutorial there...
How can i reflash? , when my phone can not connect no more with my PC ?Quote:
Originally Posted by simox
and battery can not charge, then my mobile is broken complet .
Well, you didn't said that it cannot be connected to PC. From where should I know?
Probably the EROM is damaged. Try this: REPAIRING EROM GUIDES for most sonyericsson phones
I'm waiting the D -day when i be able to patch a db2012....cid 52....
I know it's a hard work,,,
Hi, i have a k800i, recently converted to a k810i locked to vodafone.
I used the instructions but when I insert my THREE and VIRGIN SIMS it says insert correct sim :confused:
ANY IDEAS??
Thanks in Advance
flash your main again and then repeat quick acces patching and insert unlock patch from simoxpatch generator
i have the same problem : just flash your main again an then repeat all processQuote:
Originally Posted by jay_mckee@
The .vkp patches are what they are called: patches.Quote:
Originally Posted by Benyboy3
That means everytime you flash your main and FS (that's what you do to convert a K800i to K810i e.g.) you have to apply a patch once again to use a different SIM than the one the handset was originally locked to.
Sorry for sounding stupid, but im kinda new to this tuff, so what excaly do i have to do just to get my three sim working in it, would it help if I flashed it back to a k800i the did it because i only want to use my three sim card to the end of march to finish my contact then go back to payt vodafone??Quote:
Originally Posted by o0ops
so any help???
thanks in advance :)
Hello,
Model: K800i
Fireware Version: K800_R8BA024_MAIN_GENERIC_WI_RED52
Language Pack: K800_R8BA024_FS_EUROPE_2_RED52
Originally Vodafone
I've ran through the tutorial's as instructed on my k800i and everything appears to have worked correctly. When I enter the simlock menu all the settings are unlocked however when i insert a sim card it says "Configuration Error. Please contact your network operator or service centre" (The phone shows that it has network signal???). However if i remove simox's patch it just says "Insert Correct Sim". This leads me to believe the problem is within the script itself
Any help appriciated
Thank you
something goes wrong when you flashing(bad files??)I had Configuration Error when i was flashing with incompatible main to fs in my software
You flashed FS file as well...Then you need to customize your phone..Quote:
Originally Posted by Deanus69
Better do it in two steps...
First flash to debrand phone, then flash to unlock phone...
When unlocking you only need to flash with main, and offcourse vkp patch file, but when unbranding you need to flash both main & fs, and offcourse use a eu2 unbranded custom file..
Deanus69: The unlock patch is good, I'm sure. The problem is that you didn't customized the phone. Like Hicky said, first reflash the phone(MAIN, FS, Custom pack) by following one of flashing tutorials(you will find them on tutorials and guides section). After that apply the unlock patch. It will work...
Benyboy3: You need to unlock your phone. Check out the first post of this thread. If you follow the tutorial and something goes wrong, then give us more information like setool log for ex.
Thanks for a great guide! I just unlocked my k800i, and I can now use it with Tele2 instead of 3. One thought, and a question:
* Part I, step 7 should include the same instruction as part III, step 8. The same dialog pops up when applying the first patch. Not a biggie, but it could be helpful for some people.
* I upgraded the firmware when I patch unlocked it. I didn't touch the FS. If I upgrade the FS as well, will that "unbrand" my phone? I got the original icons back when I upgraded the firmware, but the shortcuts are still for "Planet 3" and "3 Player".
I just updated the tutorial. Thanks for the hint :)
To debrand the phone, you need to reflash it completely(MAIN, FS, Custom pack) with unbranded(GENERIC) firmware. Then you need to apply the unlock patch again. Here is a flashing tutorial: XS++ 2.x Guide
Do not forget to backup the user data(contact list, pictures, ringtones, etc.) before debranding.
Simox
Excellent work mate. Unlocked my K800i with no problems.
Raztaz
I've been going back and forth with this all day for the past 6 hours :( I have
se2tool2light
simlockpatchgen
xs++
as well as
K800_R1KG001_MAIN_GENERIC_RED52
K800_R1KG001_FS_EUROPE_2_RED52
I'm using a k800i T-Mobile Branded Handset
Idon't care much about the brands or anything as long as i get MMS (picture messaging to work i'm o.k) What am i doing wrong???
I've used XS++ to flash the MPB as well as the FPB
I then use the simlockpatchgen + MPB File to make a vkp
I then try to use the vkp with se2tool2light with the bypass box checked i'm pretty sure i've pressed both flash as well as the unlock button and i've said no when the apply window pops up but still no luck :(
I'm in the U.S Btw
Plus i get a window saying valus differ when i'm trying to unlock :/
Man... if I understood correctly, you didn't first apply the quick access patch to phone, and then apply the unlock patch the phone.
Read more careful the first page, I'm sure you miss something.
Hmmm maybe but when i'm using XS++ what am i to put for region cause the MBn and FBn are both generic (to my knowledge) but for the bottom right where it says customiziation what am i to put cause i'm in the U.S And i'll be using T-mobile am i suppose to have it match this :
06:02:59| Region: T_MOB_INT_A
06:02:59| CDA: CDA102511/12 R18A
or have it match the MBN?
bah WTH this shit isn't working and i've been back and forth
07:14:51| Profiling SEMC phone...
07:14:51| Platform: DB2020
07:14:51| OTP CID: 51
07:14:51| EROM CID: 52
07:14:51| EROM Color: Red
07:14:51| IMEI: 35908701xxxxxx
07:14:51| Phone ID: K800
07:14:51| Region: T_MOB_INT_A
07:14:51| CDA: CDA102511/12 R18A
07:14:51| Firmware Version: R1KG001
07:14:51| EROM: R3A022
07:14:51| Ready for operation!
settings from xs++
TMobile use unbranded (GENERIC) firmwares. And the customization is made by a TMobile branded custom pack. So, this combination of firmware and custom pack is good.
First reflash your phone complelely. Here is the guide: XS++ 2.x Guide
Where do you read that you need to press the Unlock/Repair button? I suggest you to follow carefully the guide on first post of this thread.Quote:
i've pressed both flash as well as the unlock button
so the files i've downloaded are correct? what should i use for the region settings? where it says select cda and region?
Just select that T-Mobile custom pack(T_MOB_INT_A), and you will get back the MMS settings too.
but the phone isn't even turning on plus i'm still getting the insert correct sim error
NVM Phone has turned on i left customize File system box UNchecked but fone isn't accepting T-Mobile sim
(XS++ Is the first step i've taken so far)
Tried applying the unlock patch using write as well flash with none of the tabs selected trying the quick access patch has only brought erros saying they don't match overwrite or something of that nature
If the phone isn't turning on, how do you get a insert correct sim error???
It is ok if you get the insert correct sim error after flashing, and the phone is working. But YOU NEED to customize your phone. Don't waste your time to unlock it until you have put a custom pack.
About bytes mismatch error: Probably you(or anyone else) tried to apply the quick access patch before. So if you get a mismatch error just press yes to continue the operation. And FOLLOW CAREFULLY the tutorial on first post of this page.
um.. you still haven't told me what to put for region/cda for the custom pack i just don't understand it; please be more specifid cause they're is hundres of custom files
I just checked the available custom packs in XS++ for K800. There isn't any custom pack for T-Mobile. But do not complicate it more, just use EUROPE_2 (CDA102511/2). You can get later the MMS and Internet/WAP settings from Sony Ericsson official site, or maybe from your operator site...
If I flash the firmware to a newer or older version, do I have to do the quick access patch again?
Hello,
Sorry but i read all 40 pages so far, but I still don't know if it's possible to use your program to make an unlock patch for the K320?
No, because your phone is DB2012: K320.Quote:
Originally Posted by Fleksie
At the moment you can apply patches to DB2000/DB2010 CID36/49 and DB2020 CID52 platforms only.
Nice day
W710 unlocked successfully...
;W710 SW-R1JC002
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4D43A8: 30B5041C00231A1C111C1C20ADF4 F0B505213A22B4F44BFA0020F0BD
Yes... if you perform a full flash, you will have to apply the quick access patch again.Quote:
Originally Posted by geokilla
Hey could you tell me how to apply the quick access patch to a DB2010 phone, or point me into the right direction to the guide where it is stated as i can only find how to do it for a DB2020 phone.
Thanks
i need w610i vkp patch for sim-lock remove pls anyone??
like db2020...one difference don't mark "db2020 bypass" i'm not sure 100% (setoollite 1.11)Quote:
Originally Posted by Deanus69
My phone is Z550a DB2010 CID51 platform, does this one work?
Here is the tutorial: How to apply patchs with Se Tool 2 Lite on DB2010 phones. It will work only if your DB2010 phone is CID49.Quote:
Originally Posted by Deanus69
dj_maryo:
You need first a w610 MAIN firmware, then read the first post of this thread.
a123456789:
Cannot be unlocked for free, sorry...
Thanks for answering... Is there any resource for checking which platform a SE phone is? Some other forum told me it was DB2010 :( I'm new to SE unlocking. Thanks in advance.Quote:
Originally Posted by jasmin
Platform and cid of sony ericsson phones
or connect it to xs++.
XS++ 3.1 Guide-Flashing,Customizing,Recovering
Look at the pictures ( it`s written under Platform )
Nice day