Printable View
I tried to flash my w700i (originally R1DB001) with xs++, W700_R1CA021_MAIN_EU_1_CR_RED49 as main, W700_R1CA021_FS_EMEA_2_RED49 as FS, and customization w700 EMEA_2 and xs stuck at Activating filesystem. I stoped procedure after 30 minutes, and phone couldn't turn on in phone mode (configuration error...). When select music mode at startup (works normally) and enter service info/software info - it is r1ca021. How can I fix my phone? This is my first flashing, maybe I shouldn't do it :)
thank you i want to flash my k610i to w660
but how?
djape: Try using an older version (1.2 or 1.5)
Tried xs 1.5 but everytime stops here:
18:38:17| Ready for operation!
18:38:39| Starting Loader Unlock Hack...
18:38:39| ***** R3L
18:38:39| Cannot open CID36_00_R3L.bin
18:38:39| Wait for loader hello
18:38:54| ++ Error: Flashing failed
18:38:54| Disconnected... Unplug the phone
18:38:56| Shutting down...
Now I tried xs 3.0 beta and another failure:
19:03:06| Done uploading
19:03:06| Sending shutdown command to phone...
19:03:06| Customizing was SUCCESSFUL!
19:03:06|
19:03:06| Disconnect phone from USB-port and wait for
19:03:06| further instructions.
19:03:06| You have 10 seconds.
19:03:06|
19:03:16| Open the battery-cover and reinsert the battery.
19:03:16| Hold C Button on phone and connect phone again.
19:03:16| You have 30 seconds.
19:03:16|
19:03:23| Baseband ID: 8040
19:03:23| DB2010 Marita compact
19:03:23| Protocol Version: 3.1
19:03:23| Phone has restarted successfully...
19:03:23|
19:03:23| Sending db2010_cid49red_flash_r2b.bin...
19:03:23| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
19:03:23| This is a FLASH loader
19:03:23| Flashing breakinfirm\W700_R1CA021.bin
19:03:23| Header type: BABE
19:03:23| 2 flashblocks
19:03:23| Binary acknowledge failed with: 15
19:03:23| Failed
19:03:35| Error: Flashing failed
19:03:35| Disconnected... Unplug the phone
19:03:39| Shutting down...
Stupid w700
Please post up the log when you just connect the phone.
A log of the identifying process done with SE Tool lite would be nice too.
18:39:11| XS++ v3.0 beta (Sinyar) Ready !
18:39:11| Executed on Microsoft Windows XP
18:39:19|
18:39:19| Attempting to open the interface...
18:39:19|
18:39:19| TURN OFF PHONE!
18:39:19| Hold 'C' button on phone and connect phone NOW.
18:39:19| You have 30 seconds...
18:39:19|
18:39:25| Baseband ID: 8040
18:39:25| DB2010 Marita compact
18:39:25| Protocol Version: 3.1
18:39:25|
18:39:25| Sending db2010_cid00_prodid_p3l.bin...
18:39:26| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3
18:39:26| This is a PRODUCTION_ID loader
18:39:26| Activating GDFS...
18:39:26| Phone name detected!
18:39:26|
18:39:26| Profiling SEMC phone...
18:39:26| Baseband ID: DB2010
18:39:26| OTP CID: 49
18:39:26| EROM CID: 49
18:39:26| EROM Color: Red
18:39:26| IMEI: 35167301xxxxxx
18:39:26| Phone ID: W700
18:39:26| Network: EMEA_2
18:39:26| CDA: CDA102295/7 R2A
18:39:26| Firmware Version: R1CA021
18:39:26| EROM: n/a
18:39:26| Ready for operation!
18:39:36| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:39:36| Custpack: APAC_1 (CDA102580/101) (W700)
18:39:36| Generic(non-branded) custpack: Yes
18:39:36| Allowed languages: en, id, ms, tl, vi, zs,
18:39:36| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:39:39| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:39:39| Custpack: EMEA_2 (CDA102580/2) (W700)
18:39:39| Generic(non-branded) custpack: Yes
18:39:39| Allowed languages: en, cs, hr, sr, sl, sk,
18:39:39| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:39:55| Bypassing RSA...
18:39:55|
18:39:55| Sending db2010_cid49red_flash_r2b.bin...
18:39:55| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2
18:39:55| This is a FLASH loader
18:39:55| Flashing loaders\db2010_breakin_jhf.bin
This is start, the end is in previous post. Anyway, Se Tool repaired my phone so it's working again. I managed to change firmware from R1DB001 to R1CA021 but haven't done anything else with phone, maybe some other time. Thanks for help
Ok, that's nice.
Have you just flashed the firmware with SE Tool or what did you do?
Here is log from setool:
MAPP CXC version: R1CA021
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250522
Default version: R1CA021
Operator: 000-00
USERCODE:0000
Elapsed:8 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301xxxxx CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1CA021_CXC1250514_EU_1_CR
Restore from:R1CA021_CXC1250514_EU_1_CR
Elapsed:69 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
After that phone worked normally
How do I just check my CID with XS++?
yus connect it with the program, and read the log