Flash your phone and How to apply or remove patch using SETool 2 Lite

Hello

Here is described, how to make a full flash with SETool 2 Lite and How to apply or remove patch.

DOWNLOAD SETool 2 Lite 1.10

Upgrade from 1.10 to 1.11:

SETool 2 Lite 1.10 to 1.11 update

Here can you download :

SeTool 2 Lite 1.11 with video tutorials


USB Flash Driver Installation - Guide


1. Back-up your GDFS file and write your GDFS.

Quote:

---

Look to the left column and down you will see a button called “Read GDFS”. Click it, and then hold down the C button on your phone, and then plug in the cable. Eventually it will get to a point , where it says “PROGRAMMING FLASH”. Once it says Unplug the cable , then Unplug your phone, take the battery out, put the battery back in, hold down C, press the “READY” button, then plug the phone back in, BUT right after you plug it in, about 2 seconds after or so, release the C button. SETool 2 Lite will now read the GDFS and then it will say “Getting GDFS Chunk” , and then once it has fully read your GDFS, you can click “Quit”.Take the battery out for about 20 seconds, and then put it back in.

"Write gdfs" will write gdfs to phone in BINARY format. File selected in "MISC. Box" will be assumed as gdfs in binary format.

---

2. Flash your phone using SETool 2 Lite

Quote:

---

Step 1: Shut down your phone and open SETool 2 Lite.
Step 2: Choose your phone model.
Step 3: Press the ADD button and select the Main&FS files (.mbn & .fbn). MAIN and FS can also be bin files. In fact the only important thing is that, they're unencrypted.
Step 4: Select the archive with the customization files (.zip).After it is recognized by the program , in the left side will appear informations about the customization.The archive(.zip) contain files from tpa/preset/custom.
Step 5: Press the FLASH button.
Step 6: Connect the usb cable while holding down the "c" button un your phone. Then wait for the process to finish.
Step 7: Disconnect your phone , get the battery out for 5 seconds , reintroduce it and start up the phone.It will appear a screen with "Please Wait...", wait 1-2 minutes and then the phone will start normally.

---

http://img81.imageshack.us/img81/4568/81a6gbt1mb1.jpg


3. How to remove or add the patch with SETool 2 Lite:

Quote:

---

For this part look here ( written by simox ):

Remove SIM-lock patch generator - How to apply the generated patches to DB2020 CID52 phones

Phones that CID isn`t higher than 49 , look here:

How to apply patchs with Se Tool 2 Lite on DB2010 phones

---

Nice day and

If you thank somebody, please use the Thanks button.

can setool2lite 1.11 read flash
nice day jasmin

v 1.10 OBSOLETE

Quote:

---

- added alternative security bypass for cid52 DB2020 phones.
it was stolen and released for free, so why not add it to setool2 lite ?

- now you CAN: readout files, use cross-cid flash, and apply .VKP for db2020 cid52 phones.

IMPORTANT INSTRUCTIONS:
select any db2020 model
press identify, note yours firmware version
get that firmware and add it to firmware area with "add" button
check "Bypass DB2020 security"
add text file with setool2 script command or .VKP script
press flash.
when asked, disconnect phone, remove battery, press "READY" in setool2, and attach phone.

i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass.
(because with dcu60 time for security bypass is ~10 minutes, but with COM cable it is ~25 minutes)

note.
because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...

---

v 1.11 CURRENT

Quote:

---

- added support for "quick access" patch, which allows quick security bypass and enables flash reading.
to use - generate quick access .VKP, write it in phone using "bypass DB2020 security" via "standart long way"
after .VKP is written - check ONLY "use quick access patch" and enjoy fast security bypass.
"fast patch" idea and qamaker is property of den_po,used without permission.

---

Nice day

Which one is better? Setool or XS++?

Look I use xs++ for flashing and setool lite to apply patchs. Otherwise are both good for all things.

Nice day

what is the password for download setool lite please?
thanks
br

forget previous post. i have found setool lite.
br

I just remove simlock on my k770i, locked to 3 in sweden. but thx 2 you i remove simlock.


thx for a verry good guide..........

I cant get it to work on my w880i do we press and hold C when the phone is off alrady or on ??

Also on Step 3 it asks for tyhe bin files where can i locate them?

Look at step one ( Shut down your phone and open SETool 2 Lite. ).
All files are in download section.

Nice day

hi! jasmin, u 've provided link, it will get struck at 65% during download, plz can u give another link for setool2lite 1.11.

Well here is a link for

Se Tool 2 lite 1.11 with Video Tutorials for patching !


Setool 2 lite is very dangerous for Noobs !! you press wrong button.. your phone will die ! now there is gdfs backup .. but that's a different thing. because i know ppl who wrote gdfs with some crap and got EROM dead .. and phone does not even start.

or Setool 2 lite and XS++ are same as jas pointed out

how about w200 cid red 52 db 2020? cant use vkp patch on it?

Yes, you can.

Nice day

Quote:

---

Originally Posted by dannyfento

how about w200 cid red 52 db 2020? cant use vkp patch on it?

---

Yes, U can but W200 isn't DB2020... is DB2012 ;) Remember about copy of GDFS.

@jasmin can I post there link where all can download seTool using guide made by myself? :)

i tried to use SE tool lite but when i read GDFS file , and when it back up GDFS , it shown CSloader , uploading failed, exiting now .. how ?

yes w200 script fail :(:(:(

can you unbrand a w200i with this guide?

Quote:

---

Originally Posted by ressof

can you unbrand a w200i with this guide?

---

yo dude
get the w200 firmwares.. and flash it.
i hope you know how to flash using setool 2 lite.

is it free of cost?

i couldn't remove my patches but now i can remove

Dear All, i m new to flashing i want to know how can i do loud the soound of my k810i.

the sound in headphone and also in speaker is very slow how can i flash plz explain in full manner.

thanks in advance.
regards
Rahul

when i try to doenload setool lite it breakup in 40 or 70 % what should i do? do u have another link?

Quote:

---

Originally Posted by skylinks

when i try to doenload setool lite it breakup in 40 or 70 % what should i do? do u have another link?

---

I downloaded it successful.

SETool 2 Lite V1.11

Nice day

jasmin:
It is a good step by step tutorial, but the section 3 is incomplete because the Use "quick access" patch checkbox cannot be used until the the quick accsess patch is applied to phone.

Quote:

---

Originally Posted by nikatel

how can i get erom w850 file?

---

You have all files in download section.

But first read this:

How to get access to download section

and

Forum Rules

Nice day

how do i apply the quick access patch to my phone? Thanx in adv

Look here:

Remove SIM-lock patch generator - How to apply the generated patches to DB2020 CID52 phones

Nice day

where are those files located?

I`ve got a question:
I am putting a patch for unlocking V630 CID52, so I need to flash the phone to put this patch, and I`ve got an error. I am genereiting a patch with K610 firmware and I`m flashing the phone with K610 firmware, but after the error phone doesn`t turns on. The question is: do I need to generate patch with V630 firmware and flash the phone with K610 main and patch from V630?

Main and patch has to be the same, if you read the instructions, It clearly states that to apply the patch you need the vkp patch and the firmware to be flashed to add in the right panel

-IMPORTANT INSTRUCTIONS:
select any db2020 model
press identify, note yours firmware version
get that firmware and add it to firmware area with "add" button
check "Bypass DB2020 security"
add text file with setool2 script command or .VKP script
press flash.

Hi there,

I would like to flash my K770 using the SE Tool 2 Lite, but I can´t find the model on the application.

How can I proceed??

Thanks

SETool 2 Lite doesent Support K770i.

You have to do it with XS++ 3.1

*EDIT* WRONG information, see the next but one post

XS++ 3.1 Guide-Flashing,Customizing,Recovering

Nice day

SE Tool lite supports the K770.
Just select any other DB2020 model. You can always choose any other DB2020 model for any DB2020 phone.

Quote:

---

Originally Posted by the_laser

select ANY db2020 model to service ANY db2020 phone. in short, you can ALWAYS select k610.

---

in the guide it says to place the .mbn file on qamaker.exe to apply patch. where do i get that file of my phone from? is it also in download section?

I have a question. I installed the latest firmware for my Z550i (R6GA004) but every time I try to patch my phone with setool2 lite, my MAIN doesnt work
anymore. I found out that that is so because I dont have rest file for that firmware. Does anyone have that rest file or can I patch my phone with some other program?:confused:
Thanks in advance.

Here you go.
Note: This is for CID49, you won't be able to patch your phone if you've got CID51!

hi
i look for firmware bin file for w600i plz
thankx for help

Look all files are in download section, but first read this:

How to get access to download section

and

Forum Rules

Nice day