Can someone post the correct files in order to patch my cid53 w200 with jdflasher?
Printable View
Can someone post the correct files in order to patch my cid53 w200 with jdflasher?
Have you tried this W200i Unlocking? It should work, however I haven't tried it...
did not work
What didn't work exactly? You get some error message?Quote:
did not work
yeah,about an unknown loader or sth like that
Please post the jdflasher.log located in {FAR manager}\Plugins\jdflasher\
here..hope u can help me
You need to select the w200.xml script instead of db2012.xml.Quote:
used script: db2012.xml
Follow carefully that (short) guide(http://www.topsony.com/forum/unlocki...tml#post112971).
If you are unsure about something just ask...
Edit:
Here is a more user friendly guide:
You need:
1. jdflasher_test6.rar and jdflasher_test6_add1.rar. First unpack the jdflasher_test6.rar and then the jdflasher_test6_add1.rar(overwrite the existing files!!!)
Note: It is extremly important to use this version, otherwise it will NOT work!!!
2. Unpack the w200_xml.rar to {jdflasher_folder}\scripts\ folder.
3. anyCID package
4. Make rest file with {jdflasher_folder}\rest\mkrest2.exe using your MAIN.
Note: Make sure your firmware version in phone is R4JB001 or R4HA014(yours will be probably R4JB001)
Patching W200 phones:
1. from anycid package extract contents of db2012.zip and w200/{firmware}.zip. Upload these three to your phone to \tpa\preset\custom\ folder (enter to ofs\tpa\preset\custom\ folder).
2. turn your phone on and run the executor in Games folder. When the phone turns off, remove the battery and then put it back.
3. select the w200 script, unckeck the rsa box
4. Enter to bflash and flash the rest file what you made with mkrest2.exe.
5. Now add all the patches you want(copy them to bflash).
6. Click on .. until you get some messages (press yes to all).
Hope this will help you...
yes I tried that too but no success
There are a lot of things that can go wrong. If you're not specify what is wrong, then we cannot help you...
well I followed ur guide,I tried everything,I even redownladed jdflasher plugin but no success.....
its really hard to unlock 200 if there is a way would be easyer just to pay for a full unlock and save the risk off breaking ur phone
Try this tutorial: DB201x_anyCID_video_tutorial.zip
The link is wrong...Anyway,cant I patch it with an online client?I am desperate
yer use davinci but its the same price as a unlock with D-Ultimate Unlocker
What's wrong with it? Download the zip, unpack it, and then run the exe(you need flash player installed)
I also can't download that tutorial(I just want to see what look like),but always get some strange answerQuote:
Originally Posted by simox
This is what I see Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Right click on link and select save as...(or something like that), then it will work.
It is a strange problem. With my ISP it works like a charm. I used a France proxy, and get that page too.
I will check that problem, and sorry for inconvenience.
Edit:
That web server doesn't like the direct download in some situations, and gives a "connection refused" response, so I changed the link. Now it should work correctly...
Hello
my firmware is R4GB001
does this jdflasher tuturial also work with this firm? or my phone is than dead!
sorry for my english! ;-)
work this metode with firm R4GB001 ??
or will my phone die?
sorry for my english!
It will work if first you reflash the MAIN firmware to version R4HA014 OR R4JB001.
Quote:
Originally Posted by simox
It's this you're about CID 53? Or CID 52?Quote:
Originally Posted by simox
It depends what CID is your phone. For e.g. if your phone is CID52 then use a CID52 MAIN...
It's a W200 with CID 53, network locked. I'm trying to remove "network-sim-lock". In your signature, there is a patcher, I used it with my MAIN firmware, then, got a "VKP" patch. The problem I got here is very simple: "how do I patch it"? I tryed to copy it into the oflash dir, but the jdflasher didn't let me copy it there. Also, I'm trying to do the "executor.jar" method, but with no success. If I manage to unlock it safely, I'll post a clean, simple and direct tutorial, to help those that get confused with so many versions of firmware and cid and model and everything. Thanks A LOT for helping me with anything! :DQuote:
Originally Posted by simox
UPDATE:
I flashed the W200's MAIN and FS with W200_R4JB001_MAIN_GENERIC_ME_RED53.mbn and W200_R4JB001_FS_ROGERS_RED53.fbn. Ran the executor, then put the battery out and back again, then plug it again with W200 script on jdflasher, and got the following error:
UPDATE 2:
Recently tried it with W200_R4HA014_MAIN_GENERIC_ME_RED53.mbn, like the tutorial flash-video, still, got the error below, after "executor", "unlplug cable", "re-insert battery", then "jdflahser", and finally "bflash". I can't access the bflash for some unknow reason (YES, RSA is UNCHECKED). I've got the same error. Could this be the executor, the anycid, or the w200.xml script? Any ideas? Is there another way to apply patches? Thanks everyone!
THE ERROR I'VE GOT WHILE TRYING TO ACCESS BFLASH:
(LINK TO IMAGE SHACK)
http://img220.imageshack.us/img220/8...problemsb9.png
Hi
I have w200i cid52 red R4HA014 but I can not install patch in it
Here is my jdflasher log
I don’t know why I cant patch it I have w200.xml I have jdflasher_test6_add1.rar and anycid
I went in Games clicked executor my phone turned off and I reinsert battery and I went just da flasher and unchecked RSA area and continue but when I click bflash I receive a xxxxxxxx error HELP ME!!!!!!!!!!!!!!!!!!!!!!
I'm sorry to say this buddy, but we both are screwed! I researched on many foruns, some says funny things that need to be done while trying to access "bflash", like pressing 2+5 and 3+6 for about 1 second each, but it nothing but mere coincidence. I know people that tried this for about one month, with no luck. Another tutorial states that "it's all about luck", and ask you to keep trying that you'll be able to access it... I tried many tutorials, but it seens that some can access bflash, while others just cant. I'll just wait for some script or jdflasher plugin update that will grant bflash access without these errors. =)
people, is it yust me, pr is the download link for Jdflasher_test6 invalid?? when ever i download the file, i can not extract it... it is curruped... :S i tried it from 4-5 diferent PC-s...
can someone ipload it to topsony or to rapidshare??
so none of this work? i was just about to try it :(
hm... i just try it
edit: i test it about 5 runs, and nothing works
this is the part I dont understand, what is mkrest? how to do a rest file?Quote:
Originally Posted by simox
mkrest.exe is an application to create a rest file for your phone, if you don't have that rest file, your phone will not start up when you apply patch. it is simple tp make the rest file, just drag and drop your main file over the mkrest.exe, the rest file will be created in the c:\documents and settings\user\ folder. you'll find mkrest.exe in the setool\mk_rest folder and you need to copy the created rest file to setool\rest. that's itQuote:
Originally Posted by frascio
The mkrest is included with jdflasher (in rest subfolder). You have to execute it by windows terminal (dos like screen, for inputting commands). Put a copy of your firmware (the same that is flashed in the phone), then do something just like the following example (changing the name of the file with your recently copied firmware filename):
mkrest <W200_blablablablablabalbla.ext>
Then it's done!
I see, but why all this isnt explained in the tutorial?
Another question, if I could wrong something during the procedure, will I kill my phone or simply I wont succeed to patch it but it will work the same as before?
thank for help
another thing, antivirus warning that file qmaker.exe is a malware, is it true?
Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums i hope it best to you
Where to? Wheres the link? =S
Did someone unlocked w200 CID53?:confused:
help!!.. i can't make restfile of my R4JB001 main.. where can i get this?
I think this Far manager can help you, I'm using this version. It can patch W200 with CID53, DB2020, Red
And this is USB driver (If you need)Code:http://www.mediafire.com/?dlylnymdxnz
Code:http://www.mediafire.com/?0lzntydzwnm
can pls help me how to connect my w200i phone to my computer to use the jdflash unlocker...... i had a cid53 w200i. i cant open it because of sim lock........
this is I tried five times and no success
I don't can open bflash
help please,please,please