My w580i is dead after inserting battery....!!!!!

I changed the sim card and inserted back the battery of my w580i, but my cell never switched on again, only red light blinks. I took it to a service center and they said dat there's problem in its software and that due to lots of other customers' problems they can't repair it before 4-5days, also demanded a huge sum. Now i want to repair it myself but the problem is that i am a newbie in this field. I've come to know that SEtool2 can help me get it repaired but i don't know how??

I connected my set through its usb data cable to my system and run these commands in SEtool2 lite v1.08.. Unlock/Repair , Identify , Read GDFS, Read Flash. I run these commands separately connecting and disconnecting the cable each time. I got the following information for each command:

For Unlock/Repair:
=============
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3568*******414 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:2 secs.


For Identify:
=========
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3568*******414 CERT:RED
FLASH CID:52 COLOR:RED

MAPP CXC article:
MAPP CXC version:
Language Package:
CDA article:
CDA version:
Default article:
Default version:

Operator: 000-00

Elapsed:399 secs.


For Read GDFS:
============
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3568*******414 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:2 secs.


Read Flash:
=========
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3568*******414 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:0 secs.

=============================================

Now would any kind person like to help me get out of this problem... I urgently need my cell back on. I've got GDFS_DB2020 for w580 from somewhere. i just need direction to how to do it.

Every response is much appreciated...
Thanks

You mean this : a blinking red led in the infra red port

REPAIRING EROM GUIDES for most sonyericsson phones

Nice day

Since You Have A Red LED Blinking, Your EROM Is Dead. Just Follow Jasmins Link One Post Above.
And You Wrote

Quote:

---

I've got GDFS_DB2020 for w580 from somewhere. i just need direction to how to do it.

---

WARNING: The GDFS You Are Talking About Is Not Yours. Its One Downloaded From Net. GDFS Is Unique To Your IMEI. Flashing A GDFS From Another Phone (Even Same Model And Same Firmware) Will Turn Your Phone Into An Expensive Brick.

Thanks alot jasmin and Mohammad umer for ur kind reply... it was really very helpful for me... could u also please tell me where to get erom from, apart from topsony.com as i can't download files yet.

It's not necessary to download the EROM file. Try to use the WotanServer or KulanKendi client and you don't need the EROM file.

REPAIRING EROM GUIDES for most sonyericsson phones - Top Sony Forums

Quote:

---

Originally Posted by yooman

It's not necessary to download the EROM file. Try to use the WotanServer or KulanKendi client and you don't need the EROM file.

---

Actually i don't have any accounts there so i don't think its possible to do that without having account.

You don't need an account and you don't need to buy credits for repairing the EROM; it's free.
Use the Wotan client. Leave login and password blank.

Quote:

---

WOTANSERVER, erom repair guide, dcu-60 db2020 phones only
a.Turn off the phone, remove the battery, sim and memory card,
1.download wotan
2.run wotan.exe
3.erase all log-in information
4.Press start button
5.Insert the battery then connect the phone while holding down 2+5
6.Release the buttons then wotan should update your erom.

---

i tried on wotan client as u directed above and got this msg...


Connect ur phone pressing "C"
waiting....
phone found.
DB2020 detected
LOADER: OK
FC ID: 89 7E
Define login and password!
==Failed==
Duration 00:00

now what???

I also tried XS++ but as soon as the system detects the mobile, i soon hear a standard hardware detaching sound which leaves the process incomplete.

here is the log...



17:05:28| XS++ v3.1 (Darwin) Ready !
17:05:28| Executed on Microsoft Windows Vista
17:05:35|
17:05:35| Attempting to open the interface...
17:05:35|
17:05:35| TURN OFF PHONE!
17:05:35| Hold 'C' button on phone and connect phone NOW.
17:05:35| You have 30 seconds...
17:05:35|
17:05:40| Baseband ID: 9900
17:05:40| Protocol Version: 3.1


any idea how to tackle this problem??

give the KulanKendi & setool lite method a go.