W810i Not Powering Up

Let me begin by complimenting you guys on a very informative and resourceful site.

My cousin just gave me a W810i and it does not power up. I plug in a wall charger and after a few minutes the screen starts blinking with a white Screen. When I plugged it into the usb port it just blinks the white screen every 5-10 minutes and now it does not blink anymore. From searching I believe I have to do a a firmware update.

I started with XS++ 3.1. I first backed up my GDFS, then attempted loading a firmware I found W810_R4EA031_MAIN_HONG_KONG_HN_RED49.mbn with FS W810_R4ED001_FS_APAC_RED49.fbn. The flash made it half way and got stuck. I then tried SEtool lite and it actually flashed on the main all the way but the file system got stuck halfway. I then tried with xs++ again with W810_R4CE012_MAIN_HONG_KONG_HN_RED49 and W810_R4CE012_FS_HONG_KONG_RED49 and this time the main made it up to 362 block of 364 then got stuck. I then try it again in Setool lite this time I did not use the FS file but used the Restore file option, it made it to about 157/366 then gave me a "verify block error". Is there anything else I can try or is there something I am overlooking. Thanks for the help and my log file from XS++ is listed below.



19:00:32| Baseband ID: 8040
19:00:32| Protocol Version: 3.1
19:00:32|
19:00:32| Sending db2010_cid00_prodid_p3l.bin...
19:00:32| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
19:00:32| This is a PRODUCTION_ID loader
19:00:32| Activating GDFS...
19:00:33| Phone name detected!
19:00:33|
19:00:33| Profiling SEMC phone...
19:00:33| Platform: DB2010
19:00:33| OTP CID: 49
19:00:33| EROM CID: 49
19:00:33| EROM Color: Red
19:00:33| IMEI: 35906100xxxxxx
19:00:33| Phone ID: W810
19:00:33| Region: HONG_KONG
19:00:33| CDA: CDA102494/5 R3A
19:00:33| Firmware Version: R4CE012
19:00:33| EROM: n/a
19:00:33| Ready for operation

Flash It With Xs++

The battery was completely dead lucky for me a co-worker had a Sony Ericsson at home he no longer user which had a fully charged battery. Flash worked and now the phone is working, Just getting configuration error. Oh well of to searching.

you need to finalize your phone, this was discussed too many time allready. Upload the Custom Files.

reflash the MAIN. If it's not working, flash EROM.

just try update

you need custom file....goto custom file room