1 Attachment(s)
Super Function'n'Quality by StaM
Getting rid of quality of many tested drivers, I've decided to make it myself :)
Check it out!
SuperFunction'n'Quality 6.0 by StaM.
Based on SuperFunction v5.7 by Strong, some codes from Raiderski's(supermode). Thanks to Raiderski mod on Kriomag's 21.91.
optimized for K750-W800. Also works with W810 [CID 36 - CID 49].
=========================================
Copy camdriver0.dat to ifs/settings/camera and restart your phone.
HOW TO USE SuperFunction:
SuperFunction is turned on with all camera modes (including VR)
Fine mode=improved Fine mode, longer exposure time, noise reduction ON.
Normal mode=improved Fine mode, quick shots, noise reduction slight.
There is no Normal mode with low quality.
Macro on is for macro shots only (10-40 cm to object).
Use Infinite focus (EV0.0>Zoom 1.1) for shooting object >6m far.
Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview:
-2.0 SCENE (1.1-Portrait 1.2-Landscape 1.3-Twilight Portrait 1.4-Twilight Landscape 1.5-Sports 1.6-Beach/Snow 1.7-Document)
-1.7 PROFILE (1.1-Low Light+ISO100 (only at infinity mode ISO 100 takes affect) 1.2-Cloudy Outdoor)
-1.3 MANUAL SHUTTER SPEED (1.1-4.0 increase/decrease speed viewfinder preview)
-1.0 FLICKER CORRECTION
-0.7 SPOT PHOTOMETRY (1.0-off 1.1-on, useful for macro shooting)
-0.3 ZOOM (1x-6x)
0.0 MANUAL FOCUS (1.0-auto, 1.1-infinite, 1.2-4.0 manual, half press shutter for zoom preview)
+0.3 EV (1.1-2.0, Normal -3.5)
+0.7 MANUAL WHITE BALANCE (1.1-1.3 cold, 1.4-4.0 warm)
+1.0 CONTRAST (1.1-4.0)
+1.3 SATURATION (1.1-default, 1.2-4.0 value from b/w to strong coloured)
+1.7 COLOR EFFECT (1.1-2.5 green, 4.0-2.6 red)
+2.0 COLOR EFFECT2 (1.1-2.5 yellow, 4.0-2.6 blue)
========================================
The driver has manualy lock/unlock exposure.
It is useful when takes photos indoors and some outdoors to avoid high overexprosure
works only in infinite mode (EV 0.0 +/- zoom 1.1) move the camera to get the desired light, press half shot and hold it to lock exprosure, then move the camera to the object and take the photo.
For Nightshots better use manual Speed Shot, that is faster than Nightmode (1 sec exposure time).
In good daylight outdoor shots use Normal mode (up to 1/20 exposure time).
In low Light conditions and indoors shots use Enhanced mode. Flash is adviced to use.
Use manual White Balance function for better results.
Always hold the camera tightly in your hands, or use a tripod to avoid blur shots.
When using manual focus, better turn on zoom preview for easier tuning.
ISSUES: unknown.
Have a nice day!
Attachment 6132
1 Attachment(s)
SuperFunction'n'Quality 6.7f
In previous version there was a bug with Night Mode shooting...
Spending another day experimenting :) , I've solved the problem and added some new improvements to camdriver. I think, it's stable enough to be a final version.
Super Function'n'Quality ver.6.7 by StaM.
=========================
Based on Super_modmix by Strong v1.2 beta, A4A 13.0 Beta. Superfunctions combined from Strong 5.7 and JonAugust_69 v.54.64.
optimized for K750-W800. Works with W810 also. (CID 36-CID 49)
Copy camdriver0.dat to ifs/settings/camera and restart your phone.
HOW TO USE SuperFunction:
SuperFunction is turned on with all camera modes (including VR)
Fine mode=improved Fine mode, longer exposure time, noise reduction ON.
Normal mode=good quality, quick shots, noise reduction slight.
Macro on is for macro shots only (10-40 cm to object).
Use Infinite focus (EV0.0>Zoom 1.1) for shooting object >6m far.
Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview:
-------------------------------------------------------------------------------------------------------------------
-2.0: SCENE (1.1-Portrait 1.2-Landscape 1.3-Twilight Portrait 1.4-Twilight Landscape 1.5-Sports 1.6-Beach/Snow 1.7-Document)
-1.7: ISO CHANGE (1.0 - 2.3, 1.0 is auto)
-1.3: FOCUS MODE (1.0 macro mode, 1.1 normal mode, 1.2 full range, 1.3 Fast mode, 1.4 Fast mode and full range, 1.5 Macro mode). Default is normal.
-1.0: SPOT PHOTOMETRY (1.0-off 1.1-on, useful for macro shooting)
-0.7: MANUAL SHUTTER SPEED (1.1-4.0 increase/decrease speed viewfinder preview)
-0.3: ZOOM (1x-4x)
0.0: MANUAL FOCUS (1.0-auto, 1.1-infinite, 1.2-4.0 manual, half press shutter for zoom preview)
+0.3: EV (1.1-2.0, Normal -3.5)
+0.7: MANUAL WHITE BALANCE (1.1-1.3 cold, 1.4-4.0 warm)
+1.0: CONTRAST (1.1-4.0)
+1.3: SATURATION (1.1-default, 1.2-4.0 value from b/w to strong coloured)
+1.7: COLOR EFFECT (1.1-2.5 yellow, 4.0-2.6 blue)
+2.0: COLOR EFFECT2 (1.1-2.5 green, 4.0-2.6 red)
========================================
The driver has manually exposure lock.
It is useful when takes photos indoors and some outdoors to avoid high overexprosure.
Works only in infinite mode (EV 0.0 +/- zoom 1.1). Move the camera to get the desired light, press half shot and hold it to lock exposure, then move the camera to the object and take the photo.
In good daylight outdoor shots use Normal mode (max. 1/20 exposure time).
In low Light conditions and indoor shots use Fine Mode. Flash is adviced to use.
Use manual White Balance function for better results (especially with Flash - set WB to 1.4-1.5).
Always hold the camera tightly in your hands, or use a tripod to avoid blur shots.
When using manual focus, better turn on zoom preview for easier tuning (on 1.2-4.0 values).
FIX in 6.7: Night Mode stabilized, fixed camera hanging after nightshot.
IMPROVED in 6.7: Image Filtering (Pixel Interpolation) added (thanx to Raiderski 6.7.2), camera I/O updated.
ISSUES: unknown.
Attachment 6142
Please, post your suggestions and thinks! ;)
Re: SuperFunction'n'Quality 6.7f
thanks a lot . really good driver
