trying to unbrick my W810i

Here's where I started.

So then I use SEtool2Lite to flash it again. Here's the log file with the error @ the end.

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102555/107
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "C:\Program Files\SEtool2lite\rest\R4EK001_CXC1250316_GENERIC_ HN"
writing C:\Documents and Settings\Kenny\My Documents\My Download\w810\w810 firmware\W810_R4EK001_MAIN_GENERIC_HN_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:344
Will flash 344 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Kenny\My Documents\My Download\w810\w810 firmware\W810_R4EK001_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:389 secs.

What do I do now?????

Remove your battery few minutes and tried again connect to xs++ 3.1. Maybe will this work, because by some others did this work.

Nice day

try flash it with another firm

have u backed up ur GDFS before doing all this? if u did, please restore the GDFS.

I restored the GPFS several time but I can't seem to flash the phone any more. I am thinking that I have a hardware problem or the cable is messed up. This is very frustrating. I don't have access to the download area yet so if somebody can tell me where to go get another firmware, R4EA03 maybe, I would greatly appreciate it.

The problem is here:

Quote:

---

can't open file "C:\Program Files\SEtool2lite\rest\R4EK001_CXC1250316_GENERIC_ HN"

---

You need to make a rest file for your MAIN firmware with SETool_folder\make_rest\ssw2rest.exe and copy it to rest folder.

Or you can use XS++ instead of SETool2 Lite...

try to flash it with XS++, as simox said there is a fault in the rest file. you could also download another SeTool and try with that.

I tried XS++3.1 and it can't connected now. corrupted header is the error I think. I'll try the rest file.

Quote:

---

Originally Posted by nguyenk

I tried XS++3.1 and it can't connected now. corrupted header is the error I think. I'll try the rest file.

---

try connecting it with 2+5 instead of C...Sometimes,when I do something wrong to my phone,it can't cannect with C,only with 2+5...