Printable View
Hello, I'm new here :D I have a problem with my K510i. I start flashing in XS ++ 3.2, but this is stopping after about 1 minute. It stops on different blocks. Sometimes on 62, 165, 130 etc. but never on the same two. When it stops I hear music from Windows like "equipment has been disconnected". Help me, please.
Sorry if my English is bad.
Hmmmmm..............Are u using the correct Main and FS files for K510i........like ( cid, color, and version)???
Post your xs++ log.Quote:
Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.
Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)
Here is a guide:
XS++ 3.1 Guide-Flashing,Customizing,Recovering
Nice day
maybe is sth wrong with your cable
http://img81.imageshack.us/img81/277/123pe2.jpg
And nothing more...
10:16:24| Error: Flashing failedCode:10:14:38| XS++ v3.2 Dev1 (Crystal) Ready !
10:14:38| Executed on Microsoft Windows XP
10:14:45|
10:14:45| Attempting to open the interface...
10:14:45|
10:14:45| TURN OFF PHONE!
10:14:45| Hold 'C' button on phone and connect phone NOW.
10:14:45| You have 30 seconds...
10:14:45|
10:14:51| Baseband ID: 8040
10:14:51| Protocol Version: 3.1
10:14:51|
10:14:51| Sending db2010_cid00_prodid_p3l.bin...
10:14:51| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
10:14:51| This is a PRODUCTION_ID loader
10:14:51| Activating GDFS...
10:14:52| Phone name detected!
10:14:52|
10:14:52| Profiling SEMC phone...
10:14:52| Platform: DB2010
10:14:52| OTP CID: 49
10:14:52| EROM CID: 49
10:14:52| EROM Color: Red
10:14:52| IMEI: 35469101xxxxxx
10:14:52| Phone ID: K510
10:14:52| Region: CENT_EUROPE
10:14:52| CDA: CDA102460/77 R7A
10:14:52| Firmware Version: R4EA031
10:14:52| EROM: n/a
10:14:52| Ready for operation!
10:15:06| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
10:15:06| Custpack: BALTIC (CDA102460/100) (K510)
10:15:06| Generic(non-branded) custpack: Yes
10:15:06| Allowed languages: en, et, lv, lt, ru,
10:15:06| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10:15:07| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
10:15:07| Custpack: CENT_EUROPE (CDA102460/19) (K510)
10:15:07| Generic(non-branded) custpack: Yes
10:15:07| Allowed languages: en, pl, cs, sk, hu,
10:15:07| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10:15:10|
10:15:10| Sending db2010_cid49red_flash_r2a003.bin...
10:15:10| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
10:15:10| This is a FLASH loader
10:15:10| Now flashing firmware main...
10:15:14| Flashing c:\documents and settings\łukasz ignaciuk\pulpit\fs main i cda p4aveu\k510_r4ea031_main_generic_red49\k510_r4ea031_main_generic_red49.mbn
10:15:14| Header type: BABE
10:15:14| 327 flashblocks
10:16:24| Error: Flashing failed
10:16:24| Disconnected... Unplug the phone
10:16:26| Shutting down...
Because when it stoped, I clicked STOP button
My flash files:
K510_R4EA031_FS_CENT_EUROPE_RED49.fbn
K510_R4EA031_MAIN_GENERIC_RED49.mbn
BTW. I will try to borrow cable from friend tomorrow.
I have that same on SeTool2Lite v1.10, but i'll try on XS++ 3.1.
use xs++3.1, DON"T USE XS++3.2 it's only a beta/test version at the moment
Problem solved. It was a battery fault.
maybe the cable does't conect right