does anyone has a modded cam driver for W580?
Printable View
does anyone has a modded cam driver for W580?
use the search, im sure you'll find something
What does the modified camera driver do? Does it boost the quality/megapixels at all?
It boosts quality of picture a little. Megapixels stay same.
Quote:
Originally Posted by xulos
Here you go.. This is BrAzzUkA's Camdriver v4.20 Vivre Colouers
Upload camdriver0.dat to \IFS\SETTINGS\CAMERA
Here is the Change Log:
Quote:
// Sony Ericsson CamDriver Version v4.20_Vivre Couleurs™ by BrAzzUkA´s for w580
// Version v4.20_Vivre Couleurs™ BrAzzUkA´s
// Optimized for the Sony Ericsson W580 ** Works w580/s500 **
//************************************************** ***************************
// OmniVision 2640 camera driver setup file for ONLY_LINDSAY
//************************************************** ***************************
//
// Release history:
// 2008-xx-xx Rev 4.20 - Vivre Couleurs™ Stable
// - Color Correction Stable by BrAzzUkA´s
// - Levels Color Correction Normal/High/Low
// - More Brightness
// - New JPEG compression buffer size based Qtable by Raiderski
// - Fix White Balance WB
// - Implemented unlock the property clock 24mhz with Master Clock™ 24mhz
// - New Lens correction
// - FRAME_RATE_30_FPS/FRAME_RATE_15_FPS/FRAME_RATE_14_FPS/FRAME_RATE_12_FPS
// - New White balance and Color Correction RGB
// - SENSOR_30FPS_SVGA_MODE
// - SENSOR_15FPS_UXGA_MODE
//
// 2008-02-16 Rev 4.17 - Vivre Couleurs™ by BrAzzUkA´s
// - Added properties Image stabilization/Photo metering/Mirroring Macros
// - Color_CC Color Correction by Raiderski
//
// 2008-01-21 Rev 4.0 - Master Clock™ w580 by BrAzzUkA´s
// - New Macros for JPEG new sequence buffer sizes by BrAzzUkA´s
// - New JPEG compression (Q scaling factor) tables for JPEG retry by Number1 and others modders
// - New White balance fixed (W910),exposure fix for w580 by BrAzUkA´s
// - Implemented property for work with 24mhz by BrAzUkA´s
//
// 2008-01-21 Rev 3.9 - New Sequence Power on/off by BrAzzUkA´s
// 2008-01-12 Rev 3.8 - Set ExposureTime for Xenon: MAX 1360 by BrAzUkA´s
// 2007-09-27 Rev 3.7 - Minimal JPEG scaling 97% to 100%
// 2007-09-27 Rev xxx - 100% compression for all resolutions under fine mode
// 2007-09-27 Rev xxx - Reduced ISO to 50 before GAIN calculations
// 2007-09-27 Rev xxx - Increased exposure time for all framerates
// 2007-09-27 Rev xxx - Corrected buffer for all resolutions
// 2007-04-30 Rev 3.6 - Release for Lindsay ITP and signaling build
// 2007-04-30 Rev xxx - Final settings for Lindsay second source optics
// 2007-04-18 Rev 3.5 - Release for Lindsay ITP and signaling build
// 2007-04-18 Rev xxx - Corrected typo in seq_get_prop_0
// 2007-04-17 Rev xxx - Dual source detection and settings variation for Lindsay (only)
// 2006-11-07 Rev 3.4 - Release for Lindsay ITP and signaling build
// 2006-11-07 Rev xxx - Added sup_size 15[140,F0,5DC] VF 240 x 180
// 2006-10-05 Rev xxx - Release for Cyndi/Ella ITP and signaling build
// 2006-09-29 Rev 3.3 - Release for Ai signaling build
// Corrected Wait Time for 13.89fps mode
// 2006-09-18 Rev xxx - Release for Lindsay ITP and signaling build
// 2006-07-27 Rev xxx - Release for Ella ITP and signaling build
// 2006-07-20 Rev xxx - Release for Ai signaling build (no changes)
// 2006-07-19 Rev 3.2 - Release for Cyndi signaling build
// Changed power on/off sequence to fix power consumption problems
// 2006-07-19 Rev xxx - Corrected Exposure Time of Xenon for 13.89fps of Cyndi/Ai
// 2006-07-13 Rev 3.1 - Release for Ai signaling build
// Changed frame rate of ID 0x14 to max 13.89fps
// 2006-07-07 Rev xxx - Release for Charlotte ITP and signaling build
// 2006-07-07 Rev 3.0 - Release for Thelma/Miyu/Ai signaling build
// Added sup_properties = b[0,0,0] and c[0,0,0]
// 2006-05-30 Rev 2.9 - Release for Cyndi ITP and signaling build
// All the changes are made to fix Broken Image
// Changed seq_set_prop_6
// Added sup_sizes = 14[140,F0,5DC] VF 320 x 240
// Added cam_post_processing_14=01
// Added seq_vf_config_14
// 2006-05-03 Rev xxx - Release for Cyndi ITP and signaling build (no changes)
// 2006-05-02 Rev xxx - Release for Charlotte ITP and signaling build (no changes)
// 2006-04-21 Rev 2.8 - Release for Thelma/Miyu signaling build
// Changed EV settings to lower AE target level
// 2006-04-11 Rev xxx - Release for Ai ITP build (no changes)
// 2006-04-05 Rev xxx - Release for Cyndi signaling build
// Changed power off sequence for Cyndi
// 2006-03-27 Rev xxx - Release for Charlotte ITP and signaling build (no changes)
// 2006-03-27 Rev xxx - Release for Thelma/Miyu signaling build (no changes)
// 2006-03-23 Rev 2.7 - Release for Thelma/Miyu ITP build
// Changed 13MHz input clock setting for green noise issue
// 2006-03-22 Rev xxx - Release for Charlotte ITP and signaling build
// 2006-03-20 Rev 2.6 - Release for Thelma/Miyu ITP and signaling build
// 2006-03-20 Rev xxx - Changed AWB settings
// Changed max gain of AGC to x8
// Changed clock divider setting at seq_init to reduce high frequency
// Changed stop/start AE sequence
// Disabled contrast/brightness
// Restore Rev1A settings
// 2006-03-17 Rev xxx - Removed all conditions on 2x capability, since applies to all products now.
// 2006-03-17 Rev 2.5 - Release for Cyndi ITP and signaling build
// Changed output drive select to "2x capability" for Cyndi
// Changed Cyndi power off sequence
// 2006-03-15 Rev 2.4 - Re-release 2.4 for Charlotte signaling build
// 2006-03-15 Rev xxx - Changed output drive select to "2x capability" for Charlotte for Rev2B
// 2006-03-14 Rev 2.4 - Release for Charlotte signaling build
// 2006-03-13 Rev xxx - Changed output drive select to "2x capability" for Charlotte
// 2006-03-13 Rev 2.3 - Release for Thelma/Miyu signaling build (no changes)
// 2006-03-11 Rev xxx - incorporate OmniVision Settings 0.22 (2006-02-28)
// Changed clock settings for reduce noise
// Changed flicker settings
// Changed Gamma settings
// Changed Sharpness and UV adjust setting
// Changed WB minimum gain
// then base value of ISO was aslo Changed to ISO110
// Changed WB settings
// Changed ISO and MWB settings for Xenon flash
// Corrected zoom settings of VGA
// Changed AE settings of normal light mode,
// Changed wait time of switching to VT
// 2006-03-06 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-03-01 Rev xxx - Release for Miyu signaling build (no changes)
// 2006-02-26 Rev 2.2 - Release for Thelma ITP and signaling build
// Changed AE target and Gamma settings
// 2006-02-25 Rev xxx - Changed 13MHz input clock setting for Rev2B
// Added flicker base setting for Rev2B
// Added manually AGC setting at seq_init to re-do BLC calibration
// Changed low light setting for AE freeze issue
// Changed AWB setting for Rev2B
// Changed AWB minimum gain setting to reduce noise for Rev2B
// Changed lens shading correction settings for Rev2B
// Replaced Rev2A to Rev2B (their settings are equal)
// Reserved REG_6 to save sensor version
// 2006-02-23 Rev xxx - Release for Thelma signaling build (no changes)
// 2006-02-22 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-02-22 Rev 2.1 - Release for Cyndi ITP and signaling build
// Changed CHECK_FLASHED (0=not flashed 1=flashed)
// 2006-02-14 Rev xxx - Release for Cyndi signaling build (no changes)
// 2006-02-13 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-02-13 Rev xxx - Release for Thelma signaling build (no changes)
// 2006-02-10 Rev xxx - Release for Miyu ITP build
// 2006-02-10 Rev 2.0 - incorporate OmniVision Settings 0.21 (2006-01-26)
// Added Rev2A sensor settings
// Select appropriate settings by using sensor version
// Changed flicker base settings for 13MHz input
// Added YUV setting at seq_ss_stop/seq_init for power save
// 2006-02-09 Rev xxx - Release for Cyndi signaling build (no changes)
// 2006-02-07 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-02-03 Rev 1.3 - Release for Thelma/Miyu signaling build
// Changed Thelma/Miyu power off sequence
// Changed AWB settings at seq_init for [DMS00012668]
// 2006-02-02 Rev 1.2 - Release for Cyndi ITP and Signaling build
// Changed Cyndi power on/off sequence
// 2006-01-31 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-01-31 Rev xxx - Release for Miyu signaling build (no changes)
// 2006-01-31 Rev 1.01 - Added resolution ID of VT (max 15fps) for only Miyu
// 2006-01-29 Rev xxx - Release for Thelma signaling build (no changes)
// 2006-01-29 Rev 1.0 - Changed frame rate of VT to max 15fps for Cyndi/Thelma
// Changed VF_CONFIG_SET for Xenon
// Changed criterion of auto Xenon flash
// Changed WB and gamma settings
// Corrected JPEG Quality of Xenon
// 2006-01-25 Rev xxx - Release for Charlotte signaling build (no changes)
// 2006-01-21 Rev 0.13 - Release for Thelma signaling build
// 2006-01-21 Rev xxx - Added new resolution ID and settings for VT of Cyndi/Thelma
// Changed color reproduction setting
// Changed JPEG quality, it was raised because it was too low.
// Changed lens shading correction settings
// Changed WB settings
// 2006-01-14 Rev 0.12 - Release for Thelma signaling build
// 2006-01-14 Rev xxx - incorporate OmniVision Settings 0.20 (2006-01-06)
// Changed zoom settings for reducing the center move
// Changed JPEG quality
// Changed EV settings to change luminance by 2dB
// Changed weights of average-based AEC/AGC
// Changed color of sepia to equalize Clara's sepia
// Changed fixed frame rate setting
// Changed WB settings
// Changed GET_ISOVALUE, GET_FRAME_RATE for Auto Pixel Clock
// Added set properties at the end of seq_init for ITP
// Changed AEC/AGC settings for Xenon flash
// 2006-01-04 Rev 0.11 - Release for Charlotte ITP and signaling build
// 2006-01-04 Rev xxx - Changed clock off setting for inverting signal in Charlotte
// 2005-12-26 Rev xxx - Changed parameters related to Image Quality for sensor Rev1A
// Changed gamma settings
// Added lens correction settings for only sensor Rev1A
// Changed EV range only from -2.0EV to +2.0EV
// Changed mode of AEC/AGC to Average mode
// Added 16-zone average weight settings of AEC/AGC
// Changed output drive select to "2x capability" for Thelma
// 2005-12-17 Rev 0.10 - Release for Thelma phone software build
// 2005-12-17 Rev xxx - [DMS00012668] Changed seq_vf_config, it is added wait time
// Reserved REG_7 to save resolution ID
// [DMS00023646] Added 144x176, 96x128 for VT in Thelma/Cyndi
// But they are not available yet
// 2005-12-16 Rev xxx - Changed clock off setting for inverting signal in Thelma
// 2005-12-14 Rev 0.9 - Release for Charlotte ITP build
// 2005-12-14 Rev xxx - Changed all phones to use 13MHz clock
// 2005-12-10 Rev 0.8 - Release for Thelma phone software build
// 2005-12-10 Rev xxx - incorporate OmniVision Settings 0.18 (2005-12-10)
// Changed init settings of AWB and Black Level Adjust
// Changed Zoom sequence to mask an invalid frame except for SS
// Changed YUV SS sequence for Xenon as well as one shot JPEG SS
// 2005-12-06 Rev xxx - Moved $f commands to the end of each I2C sequence
// 2005-12-04 Rev 0.7 - Release for Thelma phone software build
// 2005-12-02 Rev xxx - Corrected seq_get_prop_b, reversed ISO and ShutterSpeed
// Changed how to handle JPEG retry counter, default is 0
// Corrected GET_SHUTTERSPEED macro for low frame rate
// Changed wait time at JPEG snap shot
// 2005-12-01 Rev xxx - Corrected frame rate settings of VF config
// Corrected GET_ISOVALUE macro
// Changed Xenon flash sequence
// 2005-11-28 Rev 0.6 - Release for Thelma first adaptation of phone software
// 2005-11-26 Rev xxx - Added Xenon flash sequence
// Reserved REG_8 for auto Xenon flash
// Smartened up macros of JPEG snap shot sequence
// 2005-11-25 Rev xxx - Changed Property 12 - get EXIF Information 2
// Byte 3 is changed to Qscale factor from Quality
// 2005-11-25 Rev xxx - Changed Property 11,12 - get EXIF Information 1,2
// Reserved REG_9 REG_A for save EXIF information
// Changed frame rate of video recode
// Changed JPEG retry sequence
// Reserved REG_B REG_C REG_D REG_E REG_F for JPEG retry
// Changed Thelma power on/off sequence
// 2005-11-23 Rev xxx - Changed JPEG without header mode of OV2640,
// because OV2640's header is incompatible with EXIF standard
// Added JPEG header sequence for OV2640
// Added JPEG OneShot/Retry sequence
// 2005-11-15 Rev 0.5 - Update release for Thelma EP2.1 ITP
// Changed resolutions ID which values are mentioned in HEX
// Deleted 90deg rotation of Thelma VF 220x168
// 2005-11-14 Rev 0.4 - Update release for Thelma EP2.1 ITP
// Changed Power Off sequence for Thelma EP1.0
// 2005-11-12 Rev 0.3 - Release for Thelma EP2.1 ITP
// 2005-11-12 Rev xxx - Changed Test Pattern property
// 2005-11-12 Rev xxx - Update Thelma VGA camera control
// Changed Xenon flash property
// 2005-11-11 Rev xxx - Add additional zoom configs, also simplify them a bit
// update Charlotte I2C power control
// make test pattern property shared
// explictly set registers for FLICKER_BASE_SETTINGS
// 2005-11-12 Rev xxx - incorporate OmniVision Settings 0.16 (2005-11-10)
// Changed color bar test pattern setting for Thelma ITP
// 2005-11-11 Rev xxx - Corrected mistake of macro for Thelma VGA camera
// 2005-11-10 Rev xxx - incorporate OmniVision Settings 0.15 (2005-11-08)
// Added VF 320 x 240 configs for Cyndi
// Changed Thelma power on/off sequence for twin camera
// Added 90deg rotation of VF for Thelma ITP
// Added Test pattern property (30) for Thelma ITP
// 2005-11-07 Rev xxx - incorporate OmniVision resolutions for zoom
// 2005-11-07 Rev xxx - incorporate OmniVision Settings 0.14 (2005-11-03)
// Added input clock settings: 13MHz/24MHz
// 2005-11-04 Rev 0.2 - Release for Charlotte EP1.5 build
// 2005-11-04 Rev xxx - Basic snapshot
// Added VR 176 x 144 configs
// 2005-11-04 Rev xxx - Corrected EV(0) and WB(1) properties
// Changed a color of Sepia
// Changed power on/off sequence for Thelma Wing-Board2
// Changed resolution 0xC to 220x168 instead of 220x165
// 2005-11-03 Rev xxx - Charlotte will attempt to run with 24MHz clock
// Corrected Charlotte power_on sequence and VF size
// Fixed vertical mirror property
// Fixed typos in size configs
// 2005-11-02 Rev xxx - incorporate OmniVision Settings 0.13 (2005-11-01)
// change I2C address 0x60 -> 0x30
// change power on/off sequence for Thelma Wing-Board1
// change CLK setting to 13MHz
// add vsync/hsync settings are same as OVT settings
// 2005-11-01 Rev xxx - incorporate OmniVision Settings 0.11 (2005-10-28)
// use REG_BANK_0x macros whenever possible
// 2005-10-28 Rev xxx - incorporate OmniVision Settings 0.10 (2005-10-27)
// 2005-11-01 Rev 0.1 - Skeleton driver:
// all properties and resolutions present, but empty
Its the best ive come across so far :D
I found this:
W580 Camdriver 30 fps
thanks jamie, but how do I access that directory to put the file there? Do you need to unlock the phone first?
Not unlock,but you need to unbrand your phone to get access to file system of your phone.