SeTool2 Lite 1.11

v 1.10 OBSOLETE

- added alternative security bypass for cid52 DB2020 phones.
it was stolen and released for free by den_po, so why not add it now to setool2 lite ?

- now you CAN: readout files, use cross-cid flash, and apply .VKP for db2020 cid52 phones.

IMPORTANT INSTRUCTIONS:
CHARGE BATTERY FULLY !!!
select any db2020 model
press identify, note yours firmware version
get that firmware and add it to firmware area with "add" button
check "Bypass DB2020 security"
add text file with setool2 script command or .VKP script
press flash.
when asked, disconnect phone, remove battery, press "READY" in setool2, and attach phone.

i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass.
(because with dcu60 time for security bypass is ~10 minutes, but with COM cable it is ~25 minutes)

note.
because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...
(if you NOT using quick access patch)

note.
because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...

HAPPY NEW YEAR.

DOWNLOAD
http://www.topsony.com/forum/images/descargas/rar.gif Setool2Lite_v1.10

Small update to 1.10
1.11 CURRENT
- added support for "quick access" patch, which allows quick security bypass and enables flash reading.
to use - generate quick access .VKP, write it in phone using "bypass DB2020 security" via "standart long way"
after .VKP is written - check "use quick access patch" and enjoy fast security bypass.
"fast patch" idea and qamaker is property of den_po,used without permission.

ps.
IF YOU NOT WROTE MAIN FILE DURING SECURITY BYPASS - YOU WILL GET "DEAD" PHONE.
IN THAT CASE - SIMPLE REFLASH SITUABLE MAIN FIRMWARE WITHOUT ANY MARKED "BYPASS DB2020 SECURITY","USE QUICK ACCESS".

Download:
http://www.topsony.com/forum/images/descargas/rar.gif Setool2Lite_v1.10_update_to_v1.11


short help.

first, you must select interface.
USB is dcu60.
UFS is nothing.
COMx - comport (you should use ftdi-based service cable to achieve speeds more that 115200)

then select phone model.
it is important.

then press desired operation.

"identify" will show phone information, lock state and usercode.
also, identify will show if you have REST file for your phone.

"read gdfs" will read gdfs from phone in BINARY format.
ALWAYS BACKUP YOURS GDFS AND KEEP BACKUP IN SAFE PLACE
"write gdfs" will write gdfs to phone in BINARY format
file, selected in "misc. edit" will be assumed as gdfs in binary format.

"read flash" will read flash.
start and len of readed area must be filled in "read setup".
if you want to produce "flasheable" readout, check "read SSW" checkbox.
IT IS NOT WORKING WITH DB2020 PHONES

"flash" will flash phone firmware with possible package uploading.
notes:
if anything selected in "firmware upgrade pack" edit, attempt to handle it as SFA file will be made during flash.
if anything selected in "misc. edit", attempt to handle it as package (.zip) will me made during flash.
if anything selected in "restore file" edit, it will be assumed as "firmware restore" file.

"write script"
is most powerful and usable tool for users.

first, it can process .vkp script files.
just select "anyfile.vkp" in "misc. edit" and press write script.
.VKP supported for DB2020 phones only with "Bypass DB2020 Security" checked + FLASH operation

If you like setool2 lite, take time to check setool.net site - perhaps you will like features of FULL version.

its there a k800i unlock patch? thanks

not at the moment, it's hard to find any db2020 patches at the moment

Hum, why is being so dificult to unlock DB2020 k800i phones? lets hope someone make some patches to unlock DB2020 phones :)

I found db2020 patching in here

Unfortunately, its for w850i and w660. :(

sth for w610??????

Works with w580i?

thanks but for now i'll stick with 1.08... i'm satisfied with it.

Hi, is there any unlock patch for K800?

theres no db2020 unlock patches yet you need to wait.