Probleme Cam With W810i

With My Sonyericsson W810i When I Click Cam In Menu Dosn T Work
Is It Hard Or Soft Probleme

so i think i must flash it with setoollite

i have a same problem.

need help

have u tryed an update with seus or chaning the camdriver?????

how change cam driver

you may have not connected the cam socket correctly to the main board when you changed the casing, that could be a problem why the cam is not working, it just shows a black screen. if not the problem let me know and i can help you

cam drivers can be changed by using far and flashing a w810i pku file to it using phone xs into the main or uploaded using setool2lite in the misc location

hhhmmmm i had the same problem. It was caused by the memory card. When I changed the memory card. It worked again.

i have a problem too..if i push the halfshutter the AF does his job but if i push it down the AF goes away and i have to aim again... is it an hard or sotware problem?

can evrybody show me how to change cam driver into my phone using setoollite or xs++
i know i must make something like this tpa/present/system/...

i repeared my cam with xs++
1.download xs++ and extract it
2.where xs++.exe is, is a folder called files_to_upload
3.extract my ifs.zip in the folder files_to_upload
4.start up xs++
5.press connect
6.remove phone battery for a few secs then put it back in
7.holding down C on the phone plug-it in to ur pc
8.now go to FSX
9.press start FSX
10. give it a few minutes then ur done