flash needed formy SE902 cell phone

hi guys

please need help to flash my phone i ve tryed to flash it with several files but dosn'twork properly aftre finishing the flash the phone freezed on (please waite)

witch files are needed to flash it correctly
here is the details

PHONE STATE: "RETAIL"
FLASH CID: 0052
OTP LOCKED:1 CID:52 PAF:1 IMEI:35379702053600 CERT:RED
LDR:2009-04-21 18:09 CXC1250843_DB31XX_CS_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:10 CXC1250780_DB31XX_CS_LOADER_APP_SDRAM_R2A081

Model:C902
MAPP CXC article: R3DA028 prg12041733_CHINA_AO
MAPP CXC version: R3DA028
Language Package:APAC-ANZ
CDA article: 1208-6219
CDA version: R4A
Default article: 1204-8246
Default version: R3DA028

There are 2 models of c902 with different hardware so from your log try to flash it with generic AO firmware.

i've try to flash it with ao generic butthe problem became more complicated the model type now becam K700

If you used correct files then there is hardware problem with your phone,probably lcd or water damaged phone,so take it to some private repair shop.

EDIT: did you try to flash with generic AS firmware,if you didn't please try and post result.

final y my phone has been flashed with setools files
and it works properly
the main problem was the firmware version i was using seuse flash files with setools and it dosn'nt work .

2- aftre flashing phone i have waite my be 2h for the phone has started again
thankx for all of you for your support

Thanks for the report and good luck.

hi guys
for flashing the SE C902 here is the steps

1-use the correcte firmware
2- the flash process should be done one by one means that you never use the complet package on one steps
a- flash with MBN file
b- flash with Fbn file
c- flash with customs file
3-remove a battery waite 1mn then put it a gain and press on you will have a message (please waite )about 15mn then the phone restart . and now every thing is ok you can use your phone

aftre 16days looking for a solution for my phone i found this is the best way .

thanks for all