1 Attachment(s)
SETOOL2 LITE 1.11 problem
Attachment 8992
i have windows vista and don"t work setool 2, i need this program, i from georgian,Thank you if u halp me, my english is so so bad, setool is not start i need halp pleaz help me , my windows vista is mod in windows 7, In this system there is no wirewall
Re: SETOOL2 LITE 1.11 problem
Well, your image isn't clear enough. please upload a better quality.
Re: SETOOL2 LITE 1.11 problem
Re: SETOOL2 LITE 1.11 problem
so you didn't get connection with the phone right? have you done this? USB Flash Driver Installation - Guide
Re: SETOOL2 LITE 1.11 problem
i instal driver, bat it"s don"t work i think this is propblem in windows , bat i instal windwos xp and don"t wokr it,, my problem is uniknow :s
Re: SETOOL2 LITE 1.11 problem
Quote:
Originally Posted by
nikusha136
i instal driver, bat it"s don"t work i think this is propblem in windows , bat i instal windwos xp and don"t wokr it,, my problem is uniknow :s
It is not setool or windows problem,your computer must detect phone then it will be detected with setool also.
1.Take the needle and clean usb connector on the phone(golden contacts).
2.remove battery from the phone and wait 5-6 seconds then insert battery back into the phone.
3.Don't switch the phone ON,it must be OFF.
4.Press and hold C button then insert usb cable,if phone detected you will see driver installing message.
5.Try also to press and hold 2 and 5(together)buttons then insert usb cable.
6.If same try to replace usb cable and usb port on computer.
Re: SETOOL2 LITE 1.11 problem
I repaired and thanks to everyone.
Re: SETOOL2 LITE 1.11 problem
Glad you did it yourself. Thread Closed