K610i flashed and booting yet WSOD remains...
I have a K610i that is suffering from the White Screen of Death. I have flashed the phone using both SETool Lite 1.11 and Wotanserver 3.8. The handset is now booting and I can play the demo video but the screen still remains pure white.
I have tried both the Unlock/Repair and Recovery options in SETool but to no avail.
Unlock/Repair: Completes successfully but does not solve problem.
Recovery: Throws error, "Failed to find resource !"
I also know the screen is good because I have hooked it up to another K610i. I just don't get it.
SETool log: -
Code:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:K610i
Brand:Generic Trade UK
MAPP CXC article: R1KG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1KG001
Language Package:EUROPE_2
CDA article: CDA102497/61
CDA version: R5A
Default article: cxc1250376
Default version: R1KG001
Network LOCKED
Operator: MULTIPLE
Elapsed:6 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing F:\drivers\k610i\firmware\K610_RED_CID52_R3B021_EROM-FOTA_2006-12-18_15.bin
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:80
Will flash 4 blocks...
SSW loading returns:0
Elapsed:15 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:22 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing F:\drivers\k610i\firmware\K610_R1KG001_FS_EUROPE_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
Elapsed:71 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:17 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
USERCODE reset to 0000
Elapsed:23 secs.
Re: K610i flashed and booting yet WSOD remains...
If flashing was done correctly and display is working fine on another phone then check the board is it water damaged and try to clean/resold display connector and small capacitors close to connector on the board.I had same problem on 2 k610 and after i resold display pins and capacitors on the board all was fine.If some track is broken you'll have to make jumper.
Regards
Satch
Re: K610i flashed and booting yet WSOD remains...
Thanks for that, Satch. I have never soldered anything so small and delicate as a mobile phone PCB. This could get interesting!
Re: K610i flashed and booting yet WSOD remains...
Quote:
Originally Posted by
leadweight
Thanks for that, Satch. I have never soldered anything so small and delicate as a mobile phone PCB. This could get interesting!
You are welcome,first check all contacts on PCB display connector.If some contact is black(it is burned and have oxide on it) or you can see something like white powder(water damaged) then try to clean it very gently with alcohol.If same then try to resold pins or take the phone to some private repair/unlock shop,he can change connector if needed.
Good luck,
Satch
4 Attachment(s)
Re: K610i flashed and booting yet WSOD remains...
Right. I couldn't crack the phone fully open up to now because I didn't have a T6. Now that I have the phone open I think I have bitten off more than I can chew.
Attachment 8979Attachment 8980Attachment 8981Attachment 8982
I can't spot any bad contacts and even if I could they are so tiny I don't think I could do anything about them. Any thoughts?
Re: K610i flashed and booting yet WSOD remains...
Hi,it's hard to tell from here but i would take the phone to some repair shop to resold lcd connector or replace it.You can just tell the man that you flashed phone and replaced lcd from a good working phone then he will tell you what he think about it.