Flashing w960i firmware, please help

Hi guys.

I need to install new firmware onto W960i.

I have read many threads and spent good few hours on forum reading.

I have XS++ 3.1 and I have backed up GDFS, then I have changed CDA etc.

I downloaded firmware from download section
W960i_B_OA1_AP_WORLD1_CDA162032-1_R6E29 - is this the right f/w?

I want to flash my phone and f/w is in rar extension which I have converted to ZIP as XS++ requires ZIP files.

Would anyone please help me what to do next?

Reason for flashing: I charge battery, it's 100% and when I make a phone call it goes down to 0 and switches off the phone. When I am texting or listening to music it's ok. I do not know what's wrong, I did master reset too. There is no new updates on SEUS ,w960i is not listed any more.

Please help.

use wotenserver to flash your phone in easy way

18:42:34| SMARTPHONE WILL BE FLASHED IN 3 PHASES!

18:42:34|

18:42:34| [---------- PHASE 1 ----------]

18:42:34|

18:42:34| Switching...

18:42:34| ENTERING FLASH MODE...

18:42:34| Master Port detected: COM8

18:42:34| Slave Port detected: COM9

18:42:34| Opening Port!

18:42:34| INIT MASTER FOR FLASH...OK!

18:42:34| PHONE INFO SAMPLED...OK!

18:42:34| EPOC FLASH APPLET HEADER SENT...OK!

18:42:34| FLASH APPLET BODY SENT...OK!

18:42:34| SHUTTING DOWN MASTER...OK!

18:42:35| RECEIVED 'AAA' FLASH BOOT!

18:42:35| GREEN LIGHT FOR SMARTPHONE FLASH!

18:42:35| Smartphone ACPU Flash Returned: OK

18:42:35|

18:42:35| [---------- PHASE 2 ----------]

18:42:35|

18:42:35| Switching...

18:42:35| ENTERING DB2000 MODE...

18:42:35| Master Port detected: COM8

18:42:35| Slave Port detected: COM9

18:42:35| Opening Port!

18:42:35| INIT MASTER...OK!

18:42:35| PHONE INFO SAMPLED...OK!

18:42:35| EPOC APPLET HEADER SENT...OK!

18:42:35| APPLET BODY SENT...OK!

18:42:35| SHUTTING DOWN MASTER...OK!

18:42:37| Baseband ID: 7100

18:42:37| Protocol Version: 3.1

18:42:37| NEW SECURITY PHONE DETECTED! SWITCHING...

18:42:38| Speed set to 460800

18:42:38|

18:42:38| Sending db2000_cid03_prodid_p3b.bin...

18:42:40| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B

18:42:40| This is a PRODUCTION_ID loader

18:42:40|

18:42:40| Sending db2001_cid53red_flash_r1a003.bin...

18:42:41| Applet ID: 060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003

18:42:41| This is a FLASH loader

18:42:41| Flashing W960i_B_OA1_AP_WORLD1_CDA162032-1_R6E29/CCPU_Signaling_SW_R9H004R_RED49.babe

18:42:41| Header type: BABE

18:42:41| 8 flashblocks

18:42:41| Binary acknowledge failed with: 89

18:42:41| Failed

18:42:41| Binary acknowledge failed with: 68

18:42:41| Command: Error 0x68

18:42:41| Failed sending flashblock 1. Returnvalue 0xD

18:42:41| Finishing flash

18:42:41| Binary acknowledge failed with: 02

18:42:41| Failed

18:42:41| Failed

18:44:45| Sendinging shutdown signal to phone...

18:44:47| Shutting down...

I tried all XS++ versions and all firmware, it say the same thing all the time:( any idea?

wotenserver - doesn't list my model...

connect it properly.. it will list

it doesn't , w980, 910 are there but 960i

I tried on 3 computers, dirvers are ok, it connects to different phones ok. When I want to connect mine, blue screen flashes and that's all, i do follow all instructions. :(