Unlocking a K750i with W800i firmware CID 49

Why can't anybody just post a tutorial about how to unlock a phone. I've read about 5 forums in a whole day and not a single clear tutorial, Everybody is just taking a guess and gives advices to users making them feel bad for just one lousy mistake they did. Isn't there at least one person who can clear it out and just say "Man, unlocking the phone using the DCU-60 cable that came with your phone is possible, or is not" I'm just tired of one saying that it it's possible technically and another one saying that is not possible practically. It's like no one is sure of what they are saying. And aside of this I am pretty convinced that there has to be a possibility to unlock it with it's own cable because it looks like it's able to change files with FAR manager, it looks like it can be flashed with it, That cable it's nothing more than a interface between an Universal Serial Bus and a Rx-Tx bridge into the phone. As I've learned so far... every single thing can be conncted onto a USB because that's why it's UNIVERSAL.
Are you just trying to make more money? or what else are you afraid of. At least let everybody know why won't anybody say a good reason why it can't be unlocked or how it can be done.

look at this ... you will find here how to make a service cable aut of 2 data cables...
http://forums.se-nse.net/index.php?showtopic=5729
http://forums.se-nse.net/index.php?s...ic=3360&st=100

For unlocking your phone you need:
1. A service-cable.
2. semc_v8.4_free which can be found in the download section

Hi. With semc_v8.4 you cannot recover K750i CID 49 Phones, so after you have read and cleared the locks with the service cable you may get CXC version not supported and then your phone will not turn on at all even though it is now unlocked. What I did at this point was use xs++ and changed the CDA of the phone with the service cable so that then I could connect to SEUS with the standard DC-60 cable and SEUS would recognize that the phone could be updated. At This point you just let SEUS do the update like normal and there you go, the phone is now turning on again and unlocked. Hope this may be of help.

@shogun interesting thing u say... but why dont u just use seus... or othee cracked soft that supports cid49... an btw how do you change cda with xs++ dosent that stand for customization??? listed in customize.xml??? you can chane it from there and upload file with FAR... so you wont need xs++ to brutfore the fone...

hi frankie . i have a problem like you , and triying alot for this . but i didn,t get a good answer . don,t worry .

@wisky_2004. Hi. I couldnt use SEUS because my phones software was uptodate and it would report that my phone was already updated so couldnt do the update. This is why I used xs++ to change the CDA version so that SEUS would then allow me to update. You just run xs++ and the customization option after choosing a CDA version. I havnt managed to find any free software that works well with CID 49, usually they have a problem with recovering phones. This is all I have worked with so far. Thanks

works for w810i too?

I'm having the same problem... I'm trying to unlock a K750i with W800i firmware CID 36 RED. I only have DCU-60 cable and I was trying to use SETool2 but I can´t get it working... any help?

well , guys here is a brief tutorial that might help you to unlock some CID 49 SE-based phones that are not supported by Semc 8.4 !!

first of all you need both of Semc 8.4 and XS++

as an example of phone i will use K750_cid_49

on ur phone , check which CXC version is installed : > * < < * < , press 1 then 2 , scroll down till u get the desired info .

assuming it contains : K750_R1DB001_MAIN_EU_1_CL_

1- connect to xs++ , and flash main part using K750_R1BC002_CXC125952_EU_1_CL.mbn or any cxc supported by Semc8.4 ...don't try to turn on ur phone after that since it won't work!!!!!

2-launch Semc 8.4 , select the proper interface and model from the drop down list ...click on Unlock tab and check clear SP Locks ...click on Do Selected Jobs..you must have battery fully-charged...you will be asked to remove and re-insert cable and battery many times ...just be patient till it finishes the Unlock procedure...once done get to the next step

3- get back to XS++ soft , connect ur phone as usual , and this time you will flash the original main flash (whose version u checked in the service menu of the phone ) i assumed K750_R1DB001_MAIN_EU_1_CL_
therefore K750_R1DB001_MAIN_EU_1_CL_RED49.mbn as main file

After that , remove battery and re-insert it back after 5 sec ..here u go ur phone is working and unlocked for ever !


Best Regards.