i have a k750i how do i check what cid i have also cannot get the usb flash drivers to install just the erricson k750 drivers from windows update?
any advice
Printable View
i have a k750i how do i check what cid i have also cannot get the usb flash drivers to install just the erricson k750 drivers from windows update?
any advice
To check CID of your phone, you can use XS++ with DCU60 cable (DCU60 comes with phone)
Flash drivers are attached here.
it was me not reading instructions......... press and hold 'c' key, it took a couple of hours to realize it meant on PHONE not....... PC Keyboard....doh,Quote:
Originally Posted by sk_quest
all drivers installed 1st go, and working 100% now .... DO I FEEL STUPID !!
Hahaha, well to be honest I've made the same mistake ;). That's the last thing you have to worry about :+
You can get the USB flash drive by installing the sony ericsson update service (SEUS).
im in deep trouble, ive flashed my k750i cid 49 with XS++ but unfotunately from the last 3 weeks ive been trying to connect the phone XS++ simply doesnt detect the phone, after sumtime, memory stick autorun pops out.ive tried the following things..
installing windows and again installing the usb drivers..
tried other pc's
tried other DCU-60 cable
but nothing seems to work..??
please i need help!!
Are you removing the memory stick from your phone? Did you tried to use the SEUS to see if the service detects your phone?Quote:
Originally Posted by cellspell
K750i to W800i Convertion!
>>>>>>>>Tutorials For Newbies>>>>>>>>>>>>>>>
How to start with and the requirements you need to follow,
A usb DCU-60 - A standard cable that comes with your phone.
A K750i Recommend updating using Sony ericsson Update Service if you are not techie.
XS++ flash software available in top sony download area.
1) main file of your area
2) FS file and a area to be matched with main file
3)cust pack of your area
Charge the battery of your phone fully before you flash and install DCU-60 usb driver.
First and foremost to do is to back up gdfs file system of your phone and keep it safe in one of the file in you’re my documents of your computer.
Have essential files such as firmwares in hand and is available in top sony download section.
main file: W800_R1BC002_MAIN_EU_1 EMEA_RED49.bin
R1BC002: Firmware Version
Main: Indicates that its the main firware
EU_EMEA: The operator
RED49: Color (Red)
And you need a FS file, may be: W800_R1BC002_FS_EU1.fbn
Cust pack of your area if it does not matsh you get configuration error.
1. Open XS++
2. Press Start
3. You will get some instructions in the left panel
4. Hold "C" on your phone and connect.
if you get "PORT STATUS: ACTIVE" And nothing happens, then unplug phone, remove battery, and insert again. Then try again.
5. Check "Flash Main Firmware"
6. Press the "..." Button, means browse. Find the main file W800_R1BC002_MAIN_EU_EMEA_RED49.bin and click open
7. Now press "Flash"
8. When its done, it will stuck on 291/291, when its on 291/291 then wait 5 seconds, and unplug phone. In XS++ press Close.
9. Now XS++ is closed. Just enter it again. In your phone: remove battery, insert again. Successfully plug your phone to XS++.
10. Now, instead of Checking "Flash main Firmware". Check "Flash File System", Browse the file W800_R1BC002_FS_EU3.fbn and select it, press open. (Means that only Flash File system is checked)
11. Press "Flash"
12. when its done just remove phone from data-cable, remove battery, reinsert. Enter XS++, attach phone.
13. Now you will have to check "Customize File System", use this:
Select Phone model:
W800
Select CDA and Region:
14. Press "Flash"
When its done, Unplug phone, remove battery, insert again. turn on Phone. And congratulations !! Now your phone is a W800i !!!! Enjoy !
2. Using FAR Manager with SEFP (Completed)
You will need:
FAR Manager
SEFP
A DCU-60 Standard Datacable, comes with phone
start with installing far, just install it normally.
Now you must have a shortcut in desktop for FAR, right click it, press propertiers. Press Find Target, a folder will appear. OR Go into: C:\Program files\Far\
Now we are in the folder FAR, You will See a folder called "Plugins", enter it.
Extract SEFP that you downloaded before in that folder.
Now we have a directory called C:\Program files\Far\SEFP with files.
Good. Go into the folder C:\Program files\Far\SEFP and run the application "sefp0.10.0.51patch.exe"
Warning! Your Anti virus may detect it as virus, its not!
press "Do it!", when its done just close..
Now, the plugin is installed.
Now you will have to flash a fake main, download from here: k750w800_r2e_dcu.49r.rar
use XS++ to flash main, its just 5 blocks, when its done, you cant turn on phone, but you can use FAR,
Now go into FAR, press ALT+F1 you will se a list, press 0: SEFP
Device: DCU-60 - Speed: 921600
If you use An K750i or W800i select K750_W800_CID49 or K750_W800_CID49 as boot script
Press "Enter The Matrix". Follow Instructions from panel
If It says Boot: Waiting for phone or something like that, then it means you will have to remove battery, and insert again. If it says something with ChipID, then it means you will have to release C.
Now, enter the folder FS, the program will do something, Wait untill its done.
:)Congratulations! Now you are in your phone system !
REMEMBER: if you flash FS (with XS++), you will lose everything changed with FAR, when you are done, and want to save your data, press the ".." keep clicking until it asks if you want to quit, press "Yes". your data is stored in phone
3- Apply patches to your phone now!
Now use G slide, tools required G- slide
XS++ flash software 3.1
first learn how to flash normally.
In this, we only have to flash main again
1- Open Gslide
2- Next to the Flash main file W800_R1BC002_MAIN_EU_EMEA_RED49.bin(2)
4- Press Add and add all your patches [3]
5- Select the output file and press "Process" [4]
6- When its done, open XS++ and connect your phone
7- And flash your main with the output from G-slide
now you are done with your phone.< enjoy>Take care not to meddle with gdfs if u do you will have a costliest paper weight in phone form.Also read other tutorials. If there is a power failure in your pc during flash then possibly phone goes dead. Blinking infrared light means corrupted erom. If u find useful just click thanks to my post and dont write seperate post to say thanks.Good luck modders! :cool:
Any tested it for conversion k750 to w800