Printable View
I have a K810i and I wanted to remove the sim-lock. But during bflash there was an error and the flashing was interrupted. Now I can't turn the phone on nor enter bflash. I can flash oflash but it's useless. Even SEUS can't repair my phone. Please help! Thank You!
I think flash chip is damaged.If flashing always stop at same position you'll have to take it to some repair shop.
I think it stopped around block 220 at step 1. But I can't verify if it stops again because it won't let me in bflash. Is the flash chip damaged even if I'm able to flash oflash?
Yes,i had the same situation with k850.I can flash main 100 times but it will always stop at FS flashing at the same place.Of course it is only my opinion so check in repair shop to be shure.
It's not quite the same problem, because I can flash FS but MAIN cannot. Inverse of your case. I think i'll keep it for parts but will not repair it. I heard that the chips are expensive.
It is not important main or fs,files are stored in flash chip and you are right it is expensive.
Here is something for you to check,just happened.Phone was working fine so i wanted to change language and flash V640 to K630 to remove vodafone logo etc.
20:28:37 NAND flash chip ID: 0020-00A1
20:28:37 Sending loader...
20:28:41 Writing file K630i_1200-4912_CentEurope_R1FA032_Red52.a2fs...
20:30:17 Final verification...
20:30:19 e Failed!
Both files flashed and then stop before customization...3 times the same.
Then i tried to switch on the phone but-configuration error-because it was not customized.
I tried to flash only customization without main and FS and it worked.Phone is working fine now.
Br,
Satch
Update:weird,it failed with fbn file also but all fine with A2.....:a018:
But i cannot turn on the phone. It has no life sign at all. And I cannot enter bflash because jdflasher gives an error. In oflash I can copy this file to phone: K810_R8BA024_FS_CENT_EUROPE_RED53. But this one cannot: K810_R8BA024_MAIN_GENERIC_SM_RED53. The phone was never flashed before so I don't think it would have been overloaded. And my brother has the same phone and I could flash it without errors. I already have another phone so I'll leave my K810 alone. Thanks for your responses.
You are welcome.To have a working phone,HW(hardware) must be fine.Your brother's phone is not damaged and that is why you can flash it.If it would be jdflasher problem then your brothers phone couldn't be flashed also and you would get errors with his phone too so i suggest you to take it to some repair shop to check it.