k800i gdfs

hi guys, recently acquired a non-working k800i from a friend in europe. ofcourse it doesn't turn on, so i checked the status of it using wotan and it shows:

Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 3
DB2020 detected
CL04 CI34 OCI31 _35170801793896_ _CDA102511/85_ _K700_ SL00 OCL01 _R3A016_
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
EROM: RED CID52
OTP: RED CID49
OTP: IMEI xxxxxxxxxxx
GDFS: K700
GDFS: CDA102511/85
GDFS: phone not recognized.
select manually if supported and press "Continue".

notice the GDFS is k700. what would i need to do to make this phone work? simple flash? thanks in advance.

i think only cruiser can fix this

SE K800 with damaged GDFS - its dead brick.

You can try to repair K800 with SETool (reading and save security variables, flash GDFS from K800 and write variables back). But if variables damaged or corrupted (after flashing K700 GDFS I guess) its cant help you.

having same problem as u........still not solve and finally changing flash ic and reflash the phone......DONE!!! Phone alive.....

Get a working K800i, backup the GDFS and write it back to yours using phone XS++, this should work.

i sure your problem solved by this INSTRUCTION but THANKS DONT FORGET.
stage:
1)you must provide orginal gdfs by your phone model(k800.w850...gdfs)it dont necessary CERTAINLY from your your phone just it same by your phone model.
2)conect your phone to box
3)add the orginal gdfs in misc file
4)go to the last tap(setting) and mark SWITCH (format gdfs when writing)
5)come back the frist tap and click on write gdfs
6)when it become complete without you disconnect your phone click on unlock/repair and when it complete disconnect your phone.
I CERTAINLY the phone become REPAIR
HIGH LIGHT:
if the service man say you your phone become repair by flash you CERTAINLY know your phone become damage after a time so just using from this stages.

jo is good my must funtion