K800i totaly broken

I bought not working- white screen flashing k800i, and after trying to unlock it with far i got this:
xss++ log:
13:43:15| XS++ v3.1 (Darwin) Ready !
13:43:22|
13:43:22| Attempting to open the interface...
13:43:22|
13:43:22| TURN OFF PHONE!
13:43:22| Hold 'C' button on phone and connect phone NOW.
13:43:22| You have 30 seconds...
13:43:22|
13:43:29| Baseband ID: 9900
13:43:29| Protocol Version: 3.1
13:43:29| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
13:43:29| ...using IMEI name
13:43:29|
13:43:29| Profiling SEMC phone...
13:43:29| Platform: DB2020
13:43:29| OTP CID: 49
13:43:29| EROM CID: 53
13:43:29| EROM Color: Red
13:43:29| IMEI: 35342701xxxxxx
13:43:29| Phone ID: K800
13:43:29| Region: S_E_EUROPE
13:43:29| CDA: CDA102511/2 R2A
13:43:29| Firmware Version: R8BF003
13:43:29| EROM: R3A022
13:43:29| Ready for operation!
setool2lite log:
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342701688326 CERT:RED
FLASH CID:53 COLOR:RED

Model:K700
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:S_E_EUROPE
CDA article: CDA102511/2
CDA version: R2A
Default article: cxc1250490
Default version: R8BF003

Operator: 000-00

Elapsed:13 secs.


Help please.

there is sumthing wrong
with your process in flashing
ur system.. have u did
crossflashing with ur unit
to another firmwaare?

I followed this tutorial Flash K800 CID53 with K810 software CID53 (for begginers)

first try changing LCD and keypad membrane, if still not working you need to repair the GDFS

hi guys, yes it happened to me this problem with white flash display, but after i change the screen, everything was normal, working fine now, i don't no how, my old screen working good with the k800 firmware but white flash with k810 firmware, so in this way i solved the problem: change the screen and if you are lucky your phone will work again normally. it's not a specifically tipe of screen just another screen for k800. i hope to not be problems with the your gdfs. good luck.

Can someone help me??? My phone is SIM locked to Telfort and I have CID53. I do all that you said here,install firmware and all the rest,but it still LOCKED to Telfort! When my phone turn on i get the message INSERT CORRECT SIM CARD! What should I do..