W800i Damaged GDFS, please help!!!

Hi everyone.

I have a w800i with a damaged/corrupt GDFS. I have succsesfully flashed the erom with far manager and then afterwards flashed the main and fs. But when i switch on a white screen comes on for about 3 seconds and then it powers off.

The main and fs that i flashed is the same as the one that was on the phone when i did a GDFS backup.

So after i flashed the erom, main and fs, i plugged the phone into xs++ to restore the GDFS but i got this, even after leaving it for about half hour:

14:22:04| XS++ v3.1 (Darwin) Ready !

14:22:04| Executed on Microsoft Windows XP

14:22:13|

14:22:13| Attempting to open the interface...

14:22:13|

14:22:13| TURN OFF PHONE!

14:22:13| Hold 'C' button on phone and connect phone NOW.

14:22:13| You have 30 seconds...

14:22:13|

14:22:23| Baseband ID: 8040

14:22:23| Protocol Version: 3.1

14:22:23|

14:22:23| Sending db2010_cid00_prodid_p3l.bin...

14:22:23| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

14:22:23| This is a PRODUCTION_ID loader

14:22:23| Activating GDFS...

14:22:23| Warning: IMEI name does not match GDFS name (IMEI:W800 GDFS:????)

14:22:23| ...using IMEI name

14:22:23|

14:22:23| Sending db2010_cid36red_flash_r2ab.bin...

14:22:23| Applet ID: 050425 0904 MATCXC1326738_COMPACTFLASHLOADER R2AB

14:22:23| This is a FLASH loader

14:22:23|

14:22:23| Profiling SEMC phone...

14:22:23| Platform: DB2010

14:22:23| OTP CID: 36

14:22:23| EROM CID: 36

14:22:23| EROM Color: Red

14:22:23| IMEI: 35785100xxxxxx

14:22:23| Phone ID: W800

14:22:23| Region: ›j
v*A

14:22:23| CDA: ›j
¢*A ›j
¢*A

14:22:23| Firmware Version: ›i
‰

14:22:23| EROM: n/a

14:22:23| Ready for operation!

14:22:39| Bypassing RSA...

14:22:39|

14:22:39| Sending db2010_cid00_prodid_r2f.bin...

14:22:39| Applet ID: 050404 1011 LLECXC125872_COMPACTPRODUCTION_ID_LOADER R2F

14:22:39| This is a PRODUCTION_ID loader

14:22:39|

14:22:39| Sending db2010_cid00_cert_r2e.bin...

14:22:39| Applet ID: 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E

14:22:39| This is a CERTIFICATE loader

14:22:39| RSA security disabled!

14:22:39|

14:22:39| Sending db2010_cid00_hack_cs_v23.bin...

14:22:41| Applet ID: 060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER

14:22:41| This is a CHIPSELECT loader

14:22:41| Activating loader...

14:22:41| Activating GDFS...

15:25:50| Error: GDFS operation failed. (thats the point where i pressed 'stop'

15:25:50| Disconnected... Unplug the phone



Please help me, i desperatley need this phone working

I have the same problem, but with my k750...
first time I had flashed it successfully with a "W800" firmware..
after that, I had tried to flash it with a "W810" firmware to test what will happen..

and here my problems had started..
so, when trying reflash it with "W800" or "K750" firmwares then trying customizing it with FSX, I always get :

14:50:09| XS++ v3.2 Dev1 (Crystal) Ready !
14:50:22|
14:50:22| Attempting to open the interface...
14:50:22|
14:50:22| TURN OFF PHONE!
14:50:22| Hold 'C' button on phone and connect phone NOW.
14:50:22| You have 30 seconds...
14:50:22|
14:50:28| Baseband ID: 8040
14:50:28| Protocol Version: 3.1
14:50:28|
14:50:28| Sending db2010_cid00_prodid_p3l.bin...
14:50:28| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
14:50:28| This is a PRODUCTION_ID loader
14:50:28| Activating GDFS...
14:50:28| Warning: IMEI name does not match GDFS name (IMEI:K750 GDFS:????)
14:50:28| ...using IMEI name
14:50:28| Restarting phone - please wait...
14:50:28|
14:50:28| Disconnect phone from USB-port and wait for
14:50:28| further instructions.
14:50:28| You have 10 seconds.
14:50:28|
14:50:38| Open the battery-cover and reinsert the battery.
14:50:38| Hold C Button on phone and connect phone again.
14:50:38| You have 30 seconds.
14:50:38|
14:50:43| Baseband ID: 8040
14:50:43| Protocol Version: 3.1
14:50:43| Phone has restarted successfully...
14:50:43|
14:50:43| Profiling SEMC phone...
14:50:43| Platform: DB2010
14:50:43| OTP CID: 36
14:50:43| EROM CID: 36
14:50:43| EROM Color: Brown
14:50:43| IMEI: 35655300xxxxxx
14:50:43| Phone ID: K750
14:50:43| Region: ›5vذA
14:50:43| CDA: ›5¢ذA ›5¢ذA
14:50:43| Firmware Version: ›ç‰
14:50:43| EROM: n/a
14:50:43| Ready for operation!
14:50:47| After making any changes with FSX
14:50:47| you must press the 'Shutdown' button
14:50:52| Bypassing RSA...
14:50:52|
14:50:52| Sending db2010_cid00_prodid_r2f.bin...
14:50:52| Applet ID: 050404 1011 LLECXC125872_COMPACTPRODUCTION_ID_LOADER R2F
14:50:52| This is a PRODUCTION_ID loader
14:50:52|
14:50:52| Sending db2010_cid00_cert_r2e.bin...
14:50:52| Applet ID: 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E
14:50:52| This is a CERTIFICATE loader
14:50:52| RSA security disabled!
14:50:52|
14:50:52| Sending db2010_cid00_hack_cs_v23.bin...
14:50:54| Applet ID: 060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
14:50:54| This is a CHIPSELECT loader
14:50:54| Activating loader...
14:50:54| Activating GDFS...


I have just a usb cable (I have not a box) and until now I never find any solution..

may be you need to give it to a service center. you made a big mistake by flashing W810i firmware into K750i phone. the phone was totally different and so the hardware and the GDFS. you've damage the GDFS. if you have made a backup of GDFS before flashing W810i, you may try reflashing the backup GDFS and try flashing W800 or K750i firmware.

Yes, I now I can repare it (with any GDFS) with a box !!. But i have only a "USB" cable. And in my country it is so hard to get that box..
This is why I search for an other solution with USB cable.
(you must know that in our case when you try write the GDFS; the flashing software stops at : Activating GDFS..).

only white screen come when i on the phone.....pls help