W810 wont flash

As per title having problems trying to flash this phone.
Phone will not turn on.
No red light in infa port.

When i click on identify i get the following message.

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.01
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
err: 32 (30)
loader header not accepted
Can't load id loader !
Elapsed:8 secs.

When i then try and flash the files to the phone i get the gollowing message.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.

I have managed to get the phone specs from xs++ and are listed below.

22:35:34| Baseband ID: 8040

22:35:34| Protocol Version: 3.1

22:35:34| NEW SECURITY PHONE DETECTED! SWITCHING...

22:35:35| Phone name detected!

22:35:35|

22:35:35| Profiling SEMC phone...

22:35:35| Platform: DB2010

22:35:35| OTP CID: 50

22:35:35| EROM CID: 50

22:35:35| EROM Color: Red

22:35:35| IMEI: 35657301xxxxxx

22:35:35| Phone ID: W810

22:35:35| Region: EUROPE_2

22:35:35| CDA: CDA102494/145 R3A

22:35:35| Firmware Version: R4ED001

22:35:35| EROM: n/a

22:35:35| Ready for operation!

22:35:44|

22:35:44| Sending db2010_db2012_cid50red_flash_r1a002.bin...

22:35:44| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695

22:35:44| This is a FLASH loader

22:35:44| Sendinging shutdown signal to phone...

22:35:44| Done.. You may now connect again...

22:35:44| Shutting down...