w890i blank screen

Hi!

I have been searching for a while now for a solution, but with no luck.

The trouble is that my w890i has a blank screen and when i start the phone a red ligth is shining on the back next to the camera.
You can play music but you dont see anything on the screen, the keypad lights up also and the phone vibrates on start.
I have change the lcd and the big flex, but no luck, still the same problem.
Have also tryed to rehot an ic on the board, no luck.

I have read about setool, but i dont know how to use it and if i must have a box to be able to use it or if i only need an usb datacable.

I dont know what to do now, so please, anyone, a solution for this problem and i would be very happy.

Thanks in advance, and this is a great forum.

Try to flash the phone - normaly it helps (if it is not water-dameged)!

Use Setool - but read the documentation before flashing (you must have the right CID and the right firmware-files and -color!). There are a lot of good help-files or documentations for Setool. If it's not the right program for you, use another flash-software like gflash, XS++, or something else).

Good luck. :)

Bye, Semmel1.

Have now used the d-ultimate unlocker and rewrite all in the phone, but no luck, still black screen.
The phone has not been wet, the indicators are not showing red, but as far as i know it has been droped from about 60cm, so i guess it is a hardware problem.
So what to do next.
I will try to follow the troubleshooting manual i have found and go trough the messaurepoints and hope for the best.

If any one have a tip, i would be happy.

is this similar to K850i???
if yes post the log of A2uploader

I think it's similar for 850