Failed finishing. Returnvalue 0x1D (W800i)

23:21:22| XS++ v3.2 Dev1 (Crystal) Ready !

23:21:25| Executed on Microsoft Windows Vista

23:21:28|

23:21:32| Attempting to open the interface...

23:21:32|

23:21:32| TURN OFF PHONE!

23:21:32| Hold 'C' button on phone and connect phone NOW.

23:21:32| You have 30 seconds...

23:21:32|

23:21:57| Baseband ID: 8040

23:21:57| Protocol Version: 3.1

23:21:57|

23:21:57| Sending db2010_cid00_prodid_p3l.bin...

23:21:57| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

23:21:57| This is a PRODUCTION_ID loader

23:21:57| Activating GDFS...

23:21:57| Phone name detected!

23:21:57| Restarting phone - please wait...

23:21:57|

23:21:57| Disconnect phone from USB-port and wait for

23:21:57| further instructions.

23:21:57| You have 10 seconds.

23:21:57|

23:22:07| Open the battery-cover and reinsert the battery.

23:22:07| Hold C Button on phone and connect phone again.

23:22:07| You have 30 seconds.

23:22:07|

23:22:16| Baseband ID: 8040

23:22:16| Protocol Version: 3.1

23:22:16| Phone has restarted successfully...

23:22:16|

23:22:16| Profiling SEMC phone...

23:22:16| Platform: DB2010

23:22:16| OTP CID: 36

23:22:16| EROM CID: 36

23:22:16| EROM Color: Brown

23:22:16| IMEI: 35682900xxxxxx

23:22:16| Phone ID: W800

23:22:16| Region: EMEA_4

23:22:16| CDA: CDA102430/101 R3A

23:22:16| Firmware Version: R1L002

23:22:16| EROM: n/a

23:22:16| Ready for operation!

23:22:33| Bypassing RSA...

23:22:33|

23:22:33| Sending db2010_cid00_prodid_r2f.bin...

23:22:33| Applet ID: 050404 1011 LLECXC125872_COMPACTPRODUCTION_ID_LOADER R2F

23:22:33| This is a PRODUCTION_ID loader

23:22:33|

23:22:33| Sending db2010_cid00_cert_r2e.bin...

23:22:33| Applet ID: 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E

23:22:33| This is a CERTIFICATE loader

23:22:34| RSA security disabled!

23:22:34|

23:22:34| Sending db2010_cid00_hack_davinciteam.bin...

23:22:34| Applet ID: ciTeam Loader for K700/K300/K500/Z500/S700

23:22:34| This is an unknown loader type

23:22:34| Now flashing firmware main...

23:22:34| Flashing c:\users\e902\desktop\xs++ v3.2\w800_r1l002_main_eu_1_ca_brown36\w800_r1l002_ main_eu_1_ca_brown36.mbn

23:22:34| Header type: BABE

23:22:34| 282 flashblocks

23:28:10| Finishing flash

23:28:10| Failed finishing. Returnvalue 0x1D

23:28:10| Done flashing

23:28:10| Flashing was successful

23:28:12| Disconnected... Unplug the phone

23:28:24| Shutting down...


Can some1 tell me what is the problem?

your phone has a brown EROM, needs to convert to RED before you can flash. Read here : TUTORIAL:Brown to Red conversion with DCU-60 ( CID36 ONLY ) - Top Sony Forums

ok tq...nice to meet u bro:)

i have a problem...my hp cannot turn on after i do the changing brown to red....hmmmm no red light blinking on infra red...

does it connect with xs or setool? if yes, check if battery has adequate amp to power on your phone or you may try other battery

still cannot turn on bro...may be i make mistake...hmmmm.before this i flash to cid49red and flash back to cid36 brown..

please post identify log from setool and xs

i cannot connect to setool or xs++ after i convert to red.before i convert my hp can turn on and i can use it.

i guess your battery is out, try with different battery or else you'll need to let the engineer do it

the battery was ok.i try with other hp.the battery was 74%...i thing the flash memory corrupted or hang..hmmm anyway tq bro i`m from malaysia.nice to meet u