w880i not supported by Xs++
Hi!
I have a w880i (orange branded) which was unlocked before. I recently upgraded the firmware using SEUS and now, whenever i switch it on, it says "insert correct sim".
I tried to flash it using XS++ v.3.1 but it says the phone is not supported.
I could not even perform a back up.
11:33:34| XS++ v3.1 (Darwin) Ready !
11:33:34| Executed on Microsoft Windows XP
11:33:38|
11:33:38| Attempting to open the interface...
11:33:38|
11:33:38| TURN OFF PHONE!
11:33:38| Hold 'C' button on phone and connect phone NOW.
11:33:38| You have 30 seconds...
11:33:38|
11:34:09| Error: Cannot open phone communication port
11:34:11| Disconnected... Unplug the phone
11:41:09|
11:41:09| Attempting to open the interface...
11:41:09|
11:41:09| TURN OFF PHONE!
11:41:09| Hold 'C' button on phone and connect phone NOW.
11:41:09| You have 30 seconds...
11:41:09|
11:41:15| Baseband ID: 9900
11:41:15| Protocol Version: 3.1
11:41:15| Phone name detected!
11:41:15|
11:41:15| Profiling SEMC phone...
11:41:15| Platform: DB2020
11:41:15| OTP CID: 51
11:41:15| EROM CID: 53
11:41:15| EROM Color: Red
11:41:15| IMEI: 35464901xxxxxx
11:41:15| Phone ID: W880
11:41:15| Region: ORANGE_GEN
11:41:15| CDA: CDA102719/78 R15A
11:41:15| Firmware Version: R8BA024
11:41:15| EROM: R3A016
11:41:15| Ready for operation!
11:41:36| Sorry, your phone is NOT SUPPORTED
11:41:36| Error: Failed to send CSLoader!
11:41:36| FSX Shutdown!
11:41:38| Disconnected... Unplug the phone
:confused:
Plis help!
Re: w880i not supported by Xs++
Quote:
Originally Posted by
hatzaw
Hi!
I have a w880i (orange branded) which was unlocked before. I recently upgraded the firmware using SEUS and now, whenever i switch it on, it says "insert correct sim".
I tried to flash it using XS++ v.3.1 but it says the phone is not supported.
I could not even perform a back up.
11:33:34| XS++ v3.1 (Darwin) Ready !
11:33:34| Executed on Microsoft Windows XP
11:33:38|
11:33:38| Attempting to open the interface...
11:33:38|
11:33:38| TURN OFF PHONE!
11:33:38| Hold 'C' button on phone and connect phone NOW.
11:33:38| You have 30 seconds...
11:33:38|
11:34:09| Error: Cannot open phone communication port
11:34:11| Disconnected... Unplug the phone
11:41:09|
11:41:09| Attempting to open the interface...
11:41:09|
11:41:09| TURN OFF PHONE!
11:41:09| Hold 'C' button on phone and connect phone NOW.
11:41:09| You have 30 seconds...
11:41:09|
11:41:15| Baseband ID: 9900
11:41:15| Protocol Version: 3.1
11:41:15| Phone name detected!
11:41:15|
11:41:15| Profiling SEMC phone...
11:41:15| Platform: DB2020
11:41:15| OTP CID: 51
11:41:15| EROM CID: 53
11:41:15| EROM Color: Red
11:41:15| IMEI: 35464901xxxxxx
11:41:15| Phone ID: W880
11:41:15| Region: ORANGE_GEN
11:41:15| CDA: CDA102719/78 R15A
11:41:15| Firmware Version: R8BA024
11:41:15| EROM: R3A016
11:41:15| Ready for operation!
11:41:36| Sorry, your phone is NOT SUPPORTED
11:41:36| Error: Failed to send CSLoader!
11:41:36| FSX Shutdown!
11:41:38| Disconnected... Unplug the phone
:confused:
Plis help!
Your EROM CID is 53. XS++ cann't flash CID53 phones (only Linux users with XS++ 4.1).
Must use FAR with JDflaher plugin.
Read here: http://www.topsony.com/forum/far-manager-f31/flash-k800-cid53-k810-software-cid53-begginers-t11605-mensaje89845.html#post89845 and use these files:
W880_R8BE001_MAIN_GENERIC_AI_RED53.mbn
W880_R8BE001_FS_EUROPE_4_RED53.fbn
HB1-06_Gen_CDA102568_13_R8A_GENERIC_EUROPE_4.zip
For unlock read here: Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums
Re: w880i not supported by Xs++
Hi Senter,
I downloaded FAR with JDFlsher plugin and tried to follot the steps in the link you mentioned. After "jumping down into a large rabbit hole", i get this message...
error: SetDirectory<setdir<setmode<doscript<cmd3c<hdr<cmd 3cbody<badanswer 10>>>>>>>
any ideas?
Thanx again in advance
Re: w880i not supported by Xs++
Sorry. I got the above error message after double clicking on 'of lash'
Re: w880i not supported by Xs++
Quote:
Originally Posted by
hatzaw
Hi Senter,
I downloaded FAR with JDFlsher plugin and tried to follot the steps in the link you mentioned. After "jumping down into a large rabbit hole", i get this message...
error: SetDirectory<setdir<setmode<doscript<cmd3c<hdr<cmd 3cbody<badanswer 10>>>>>>>
any ideas?
Thanx again in advance
Click on DB2020 in first tab, then flash Main !!!
