Not any K800i can be unlocked (that's my experience)
Hi,
I'm new here and my english is poor, sorry, but i hope that U will understand me :)
So...
I have this f****** K800i phone! Yes i know... :o I love it, because it's a f****** GOOD one!!!
My problem is, that I've read in many many forums, tried many things (guide/tutorials) and softwares to unlock it, but without success. My phone can't be unlocked!!!
Here the informations about the phone made with "just" 2 softwares:
__________________________________________________ _______________________
SEtool2
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501864295 CERT:N/A
FLASH CID:53 COLOR:RED
Model:K800i
Brand:Orange RO
MAPP CXC article: R8BF003 prgCXC1250212_ORANGE_WI
MAPP CXC version: R8BF003
Language Package:ORANGE_GEN
CDA article: CDA102511/108
CDA version: R5A
Default article: cxc1250490
Default version: R8BF003
Network LOCKED
Operator: 226-10
Elapsed:10 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501864295 CERT:RED
FLASH CID:53 COLOR:RED
Model:K800i
Brand:Orange RO
MAPP CXC article: R8BF003 prgCXC1250212_ORANGE_WI
MAPP CXC version: R8BF003
Language Package:ORANGE_GEN
CDA article: CDA102511/108
CDA version: R5A
Default article: cxc1250490
Default version: R8BF003
Network LOCKED
Operator: 226-10
Elapsed:9 secs.
XS++
16:05:49| Baseband ID: 9900
16:05:49| Protocol Version: 3.1
16:05:49| Phone name detected!
16:05:49|
16:05:49| Profiling SEMC phone...
16:05:49| Platform: DB2020
16:05:49| OTP CID: 51
16:05:49| EROM CID: 53
16:05:49| EROM Color: Red
16:05:49| IMEI: 35731501xxxxxx
16:05:49| Phone ID: K800
16:05:49| Region: ORANGE_GEN
16:05:49| CDA: CDA102511/108 R5A
16:05:49| Firmware Version: R8BF003
16:05:49| EROM: R3A022
16:05:49| Ready for operation!
__________________________________________________ _________________________
No one works...
Believe me, I've tried everything!
Here the failure messages:
__________________________________________________ _________________________
XS++ Flashing:
16:27:31| Sorry, your phone is NOT SUPPORTED
16:27:32| Error: Cannot send flash loader
16:27:32| Error: Flashing failed
16:27:34| Disconnected... Unplug the phone
XS++ Read GDFS/Backup GDFS:
16:38:09| Sorry, your phone is NOT SUPPORTED
16:38:09| Error: Failed to send CSLoader!
16:38:09| FSX Shutdown!
16:38:11| Disconnected... Unplug the phone
SEtool2
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501864295 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:8 secs.
or:
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:12 secs.
or when "Read Flash":
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501864295 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:5 secs.
__________________________________________________ _________________________
Everywhere: "Phone is not supported"
So... i think that's no way to unlock my own phone (until now).
If U have a suggestion for me I'll appreciate, when not, than thx for reading it.
Best regards,
Arakan
Re: Not any K800i can be unlocked (that's my experience)
Re: Not any K800i can be unlocked (that's my experience)
Thank U senter for reply. I've tried several times your suggestion but it is not working for me. I get error message, here the log:
cable found EPIUSB1
connecting...
got response
protocol: 0301 baseband: 9900
cid detect
<- cid=53 color=red platform=db2020
qhtry: 2020_prologue
run flashed loader
error: SetDirectory(setdir(setmode(doscript(run(gethello( IOusb::getblock(time exceed)))))))
And another error:
SetDirectory(setdir(setmode(doscript(qhldr(send QH00(IOusb::sendblock(IOusb::dcu_WriteData(time exceed))))))))
I don't realy understand what is mean with: "Upload this 3 files(customize_upgrade,executor.jar and executor.b) in /tpa/preset/custom/ with jdflasher."
I have the 3 files together but i don't know how to transfer them to the Games folder. With simple copy can't see the Games folder.
"Turn on phone and go to FileManager-Games- and run EXECUTOR.Now your phone will restart...."
I think that's the problem.
Thnx,
Arakan
Re: Not any K800i can be unlocked (that's my experience)
Hi, I have few minutes to connect,
Quote:
I don't realy understand what is mean with: "Upload this 3 files(customize_upgrade,executor.jar and executor.b) in /tpa/preset/custom/ with jdflasher."
upload = copy this files in the phone using FAR, they automaytialy be in games folder.
;)
you must use FAR manger :) to do that (XS 3.1 and Setool does nothig for CID5 unlocking)
Thnx for reply.
I've tried a lot of methods, without success... I'm happy that my phone is still working :)
I think there is no way at the moment to unlock a K800i CID53 phone by your self.