K610 giving no service after unlock with patch

i tried to unlock a K610 CID52 with SETOOL2LITE and after the unlock its shows on the screen no service,some help please..
----------------
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:******************** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:******************** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\Administrator\שולחן העבודה\K610_R1GB001_MAIN_GENERIC_TH_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9100
Will flash 455 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Administrator\שולחן העבודה\quick_access_K610_R1GB001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45B40000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:755 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:******************** CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Administrator\שולחן העבודה\Remove_SIM_lock_K610_R1GB001_GENERIC.v kp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:41 secs.