w580i Tried setool2lite ... error

Hi
My fon completely died on me. It would only have a red blink. I never had flashed it before or back-up anything.
After reading your website I downloaded USB drivers. And setool2lite.
I pressed 2+5 and Unlock/repair.
this is what I got:

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:____________ CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:15 secs.

I have no clue what to do next. I read about "flash main" but I have no clue how to do that. My rest_make folder does not have "main" in it. Can you give me layman words step guide what to do next.
Really appreciated.:confused:

Will it connect to Setool2lite using the C button? Try to identify your phone using C to connect. Usually that error is bad gdfs. If that is the case then only D-Ultimate Unlocker can fix it. But try to connect using C first.

070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009

Quote:

---

Originally Posted by chickhawk

Hi
My fon completely died on me. It would only have a red blink. I never had flashed it before or back-up anything.
After reading your website I downloaded USB drivers. And setool2lite.
I pressed 2+5 and Unlock/repair.
this is what I got:

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:____________ CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:15 secs.

I have no clue what to do next. I read about "flash main" but I have no clue how to do that. My rest_make folder does not have "main" in it. Can you give me layman words step guide what to do next.
Really appreciated.:confused:

---

Must use XS++ v3.1 and this Main:

W580_R8BE001_MAIN_GENERIC_LA_RED52.fbn

http://img135.imageshack.us/img135/1...033origzh0.jpg

xs++ is not recognizing my phone. it gives message connection failed.
setool worked with 2+5 not c.
how do i get
W580_R8BE001_MAIN_GENERIC_LA_RED52.fbn
Stupid Q: I had downloaded gordon's gate is it supposed to do anything/be in system tray/signal when i connect my phone?? Coz mine gives no indications.
If you could explain a bit !

Is .mbn different from .fbn ?
I can only find .mbn. can I use that?
Oh... xs++ doesnt recognize my phone.
[ I NEVER made any back-up did anything at all to my phone. ]

wow:confused:

Quote:

---

Originally Posted by chickhawk

Is .mbn different from .fbn ?
I can only find .mbn. can I use that?
Oh... xs++ doesnt recognize my phone.
[ I NEVER made any back-up did anything at all to my phone. ]

---

Sorry, I have mistake in my first post here. It's W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn

Read here how to flash with JDflasher: http://www.topsony.com/forum/far-manager-f31/flash-k800-cid53-k810-software-cid53-begginers-t11605-mensaje89845.html#post89845 and use these files:

W580_R8BE001_MAIN_GENERIC_LA_RED52
W580_R8BE001_FS_EUROPE_4_RED52
HB1-06_Gen_CDA102568_13_R8A_GENERIC_EUROPE_4

Hello...

I'm fairly new to this community & just wanted to introduce myself and say "hi".

Finally a stable forum with font that I can look at - which truly is a refreshing change!

I am here to learn & get involved. How can I best get involved?

Peace~