D_Ultimate Unlocker Did Not Repair my W580i

Printable View

Show 40 post(s) from this thread on one page

08-26-2009
Gigman

D_Ultimate Unlocker Did Not Repair my W580i

I just wasted $22.00 USD on this D-Ultimate Unlocker that says it can Repair EROM/SEMC and Security Zone. My phone is on responding with blinking red light and CAN NOT Connect using C. Here is log from DUU=

Code:

23:32:04 D-Ultimate Unlocker v4.01 by Cruiser Team 23:32:04 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change 23:32:04 Initializing... ! 23:32:04 1. Please see the documentation first (the tab 'Info' or attached .pdf file) ! 23:32:04 2. Choose the phone model ! 23:32:04 3. Select the desired options ! 23:32:04 4. Please connect the phone either via USB while holding 2-5… ! 23:32:04 - or via a serial cable and double-click on it in the device list 23:32:15 Selected phone: W580 23:32:15 Connecting via Generic EMP USB Flash Device (USB1)… 23:32:15 Device driver version: 2.2.0.2 23:32:15 Device driver date: 12-5-2008 23:32:15 Connecting to the baseband CPU... 23:32:15 Entering baseband CPU service mode... 23:32:15 Detected chipset: DB2020 23:32:15 Boot mode: ROM 23:32:15 Sending loader... 23:32:15 IMEI: xxxx 23:32:15 OTP CID: 51 23:32:15 Effective CID: 49 23:32:17 Please reconnect the phone (disconnect, connect while holding 2-5) 23:32:40 Sending loader... E 23:33:48 Error: 0xE1E2479D E 23:33:48 Error: 0xE1E2479D E 23:33:48 Error: 0x6C729765 E 23:33:48 Error: 0x8CDFAB78 E 23:33:48 Error: 0xFA7863EC E 23:33:48 Error: 0x780BA8B0 E 23:33:48 Error: 0x599D63C1 E 23:33:48 Error: 0x10BE36DC E 23:33:48 Error: 0x59AF7680 E 23:33:48 GDFS start-up problem E 23:33:48 Failed! ! 23:33:48 To report errors right-click this window

Once the GDFS is dead thats it right. Dont waste more money? No ack, semc, error 29 means phone is dead right?

1) Can anyone tell me why the gdfs does not start up? Is my Phone Bricked?
2) Can anyone tell me the physical location of where the GDFS resides? What chip on Board?
3) Can anyone tell me the physical location of where the EROM resides?
4) Can anyone tell me the physical location of where the Main resides?
5) Can anyone tell me the physical location of where the FS resides?
6) Can anyone tell me the physical location of where the custpack resides?

I thought this program would fix my phone but it cannot so I wasted my money. If no one can tell me how to fix it without replacing the board and buying more stuff than the phone is worth then I challenge them to show me how and make a fool out of me.

Sincerely
Gigman
:mad:
08-26-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

Well this is really freakin strange! I connected using SETOOL V1.11 and tried to flash EROM because DUUU said effective CID was 49???? Why 49 when everything I have seen said 52. Even though I could not connect using C before and could only use 2+5 and could really never get all the data on the phone. Well guess what?....It connected to SETOOL using C and I got this when I tried to flash=

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxx CERT:N/A
FLASH CID:49 COLOR:BROWN
CID not supported
Elapsed:3 secs.
ChipID:9900,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:BROWN
FLASH CID:49 COLOR:BROWN
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:75 secs.

WTF.....Flash CID:49 Brown....C button now works.......WTF do I do now??? Anyone PLEASE!
08-26-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

This is one log from SETOOL on this phone before whern I was trying to flash Main+FS using only 2+5 to connect because C would not work...now it does??????:confused:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:194 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Phone not supported in that mode
No situable fsloader found, exiting
Elapsed:28 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:121 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:74 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:74 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:81 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Abort all operations.
Can't read SCRC unit
Elapsed:45 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Abort all operations.
Elapsed:59 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing D:\Downloaded Programs\Sony Ericsson\W580i\R7AC001 RED 52\W580_R7AC001_MAIN_CINGULAR_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing D:\Downloaded Programs\Sony Ericsson\W580i\R7AC001 RED 52\W580_R7AC001_FS_CINGULAR_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2660
Will flash 133 blocks...
SSW loading returns:0
Elapsed:308 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

CDA:CDA102774/102
MODEL:W580i
VARIANT:CINGULAR
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:82 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:11 secs.
08-26-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

Now I used XS++ darwin and I got this=

00:06:26| TURN OFF PHONE!

00:06:26| Hold 'C' button on phone and connect phone NOW.

00:06:26| You have 30 seconds...

00:06:26|

00:06:31| Baseband ID: 9900

00:06:31| Protocol Version: 3.1

00:06:31| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)

00:06:31| ...using GDFS name

00:06:31|

00:06:31| Profiling SEMC phone...

00:06:31| Platform: DB2020

00:06:31| OTP CID: 51

00:06:31| EROM CID: 49

00:06:31| EROM Color: Brown

00:06:31| IMEI: 01127100xxxxxx

00:06:31| Phone ID: W580

00:06:31| Region: CINGULAR

00:06:31| CDA: CDA102774/102 R17A

00:06:31| Firmware Version: R7AC001

00:06:31| EROM: R3A022

00:06:31| Ready for operation!

And the XS++ came up with a window that sats this. "Would You Like XS++ To Update Your EROM CID to 52? *Please note this cannot be undone*

Can this work? Flash CID52 Red to CID49 Brown phone? By the way it now starts up? but gives me "Configuration error. Pleae contact your service provider or service center" I am afraid to do anything else until I know wht to do. I thought you could not flash a brown phone with Main+FS to change or fix it or unlock it. I guess DUU did something, what I dont know. I need help please.
08-27-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

Well I guess I was wrong, D-Ultimate Unlocker did fix it but I dont know how. As you can see it was changed to Brown CID49 with OTP of CID51. Dont ask me why! No one has answered so I figured it out. Trial and error. I found out that DUU had fixed the phone after all so I could use the C to connect to XS++, SETOOL LITE, Far Etc.

In DUU I selected phone model w580i
I checked box = repair erom / semc boot
I checked box = Show Codes
On security zone operation I selected unlock(+ sec.zone rebuild)
On set certificate to: I think I selected no certificate change

So what I got was the log in the beginning of this thread posted above. I was upset because I thought it did not work so I was tired and up till midnight and had to get up at 4:00. Sorry all!
Anyway i was messing with XS++ and SETool and thought that maybe I could use DUU to change cid to red52. I accidenttally changed it to CID53 first and then found SETOOL dind't like that so I changed it back to CID52. I tried it and it worked as you see below.

OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:BROWN
FLASH CID:49 COLOR:BROWN

Code:

23:09:06 D-Ultimate Unlocker v4.01 by Cruiser Team 23:09:06 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change 23:09:06 Initializing... ! 23:09:06 1. Please see the documentation first (the tab 'Info' or attached .pdf file) ! 23:09:06 2. Choose the phone model ! 23:09:06 3. Select the desired options ! 23:09:06 4. Please connect the phone either via USB while holding 2-5… ! 23:09:06 - or via a serial cable and double-click on it in the device list 23:09:22 Selected phone: W580 23:09:22 Connecting via Generic EMP USB Flash Device (USB1)… 23:09:22 Device driver version: 2.2.0.2 23:09:22 Device driver date: 12-5-2008 23:09:23 Connecting to the baseband CPU... 23:09:23 Entering baseband CPU service mode... 23:09:23 Detected chipset: DB2020 23:09:23 Boot mode: ROM 23:09:23 Sending loader... 23:09:23 IMEI: xxxxx 23:09:23 OTP CID: 51 23:09:23 Effective CID: 53 23:09:25 Please reconnect the phone (disconnect, connect while holding 2-5) 23:09:33 Sending loader... 23:09:33 Communicating with server… ! 23:09:37 News: Your credit consumption policy: Level 1 (Novice) 23:09:37 Remainig credit (supreme): 0 23:09:39 Remainig credit (supreme): 0 23:09:42 Please reconnect the phone (disconnect, connect while holding 2-5) 23:09:53 Sending loader... 23:09:56 Code NCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code NSCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code SPCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code CCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code PCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code ESLCK for relock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code NCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code NSCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code SPCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code CCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code PCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 Code ESLCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx 23:09:56 To enter a code, type < * * < on the phone with SIM-card inserted 23:09:57 Writing flash… 23:09:59 Turning off the phone... 23:10:01 Done.

I did a gdfs backup and FS read asap with XS++ and SETOOL. I did an Identify with both XS++ and Setool and found this:

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100562994 CERT:RED
FLASH CID:52 COLOR:RED

Model:W580i
MAPP CXC article: R7AC001 prgCXC1123480_CINGULAR_LA
MAPP CXC version: R7AC001
Language Package:CINGULAR
CDA article: CDA102774/102
CDA version: R17A
Default article: cxc1123364
Default version: R7AC001

Operator: 000-00

exception while closing port
Elapsed:6 secs.

Now phone would start up with AT&T Sim only but give me contact service provider error. Hmmmm??
So I Flashed Main, FS and Custpack using R8BE001 instead of R7AC001, see log below:

FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/107
MODEL:HB1-06 Gen
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\W580_R8BE001_MAIN_GE NERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\W580_R8BE001_FS_AMER ICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4180
Will flash 209 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (10240)
Customize.xml (1316)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
MEDIA_PLAYER_HOOK_3.itm (10240)
ORG_APPLICATIONS_HOOK_3.itm (10240)
preloaded_config.xml (148713)
SETT_RINGTONE_HOOK_1.itm (10240)
SETT_SCREENSAVER_HOOK_1.itm (10240)
SETT_STARTSHOW_HOOK_1.itm (10240)
SETT_WALLPAPER_HOOK_1.itm (10240)
VIDEO_PLAYER_HOOK_1.itm (10240)
Phone detached
Elapsed:397 secs.

After this it started right back up and is working. Tried both AT&T and T-Mobile and worked...UNLOCKED even.

I dont exactly know what the Brown thing was about but I changed it. If anyone can explain this all to me and help it make perfect sense then I am willing to listen. And so I hope this can help the next poor sole who has the same problem. I dont know why DUU worked but the $22.00 was not so bad after all. I have just spent 3 days trying to fix this and did it. A NEWBIE!!

I would appreciate a thank you or two if it help anyone out there.

I still would like to know answer to the six questions in beginning of thread.

Gigman
08-29-2009
swetty

Re: D_Ultimate Unlocker Did Not Repair my W580i

your phne was brown development mode but xs++ change the phone to red cid 52 consumer mode phone did not get repaired because you used c to connect too d-ultimate unlocker you haveto use 2+5 while connecting the phone but your phone got unlocked any way and there was a (customazion error contact service provider error) but you reflashed the phone soo all i okey now hope this helped you understand
08-29-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

I did use 2+5 to connect to d-ultimate unlocker! C would not work until I used d-ultimate unlocker. Then XS++ must have changed it to red52. C started working after using d-ultimate unlocker. The phone works great now. I just want to know exactly what I did to get it to work in case I need to do it again. Can somebody tell what these codes are for? They came from D-Ultimate Unlocker log:

23:09:56 Code NCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code NSCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code SPCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code CCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code PCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code ESLCK for relock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code NCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code NSCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code SPCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code CCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code PCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx
23:09:56 Code ESLCK for unlock: xxxxxxxxxxxxxxxxxxxxxxx

Also I need some help on another thread I started. Please my phone wont unlock.

Remove SIM-lock patch generator - Page 140 - Top Sony Forums
09-22-2009
amitpatel8

Re: D_Ultimate Unlocker Did Not Repair my W580i

I Have the same problem with my w580i initially it was blinking red on infra red so i decided to use D ultimate unlocker to repair the erom and GDFS reconstruction. Both this proceedures were finished successfully, but when i am trying to flash my phone with setool or xs++ i can't my phone is keep getting disconected after writing 120 blocks from 460.

Anybody have any idea what should be done. Also to add my phone was not recognised by c button on any of the tools but after repairing it wih D Ultimate it does.

Any help would be appreciated!!!!
09-22-2009
Gigman

Re: D_Ultimate Unlocker Did Not Repair my W580i

First, I take it that your phone is CID52 Red? Otherwise setool or xs++ would not try to write to it at all. Second, make sure your battery is fully charged. Third, clean the contacts on your phone, the connection to dcu 60 cable is important! Be careful not to scratch the contact too deep. Then flash one thing at a time using setool 1.11, first Main, then FS, then custpack. Try this and if that does not work then use Far Manager with JD Flasher.
09-23-2009
amitpatel8

Re: D_Ultimate Unlocker Did Not Repair my W580i

is your phone working now after doing all this steps? yes, my phone CID is Red 52.

I just want to know if this things can fix our phones or not. Also how one should recognise that my software is faulty and not the hardware? I beleive if we can still read the phone with setool and xs++ than this should be software issue only.

Thanks for your reply.

Show 40 post(s) from this thread on one page