K800 dead? Help please!

Printable View

07-14-2009
Polaris-17

K800 dead? Help please!

Hi everyone!

One time, when I inserted a Simcard, phone loaded with Sony Ericsson logo, and white screen. I went to the service, and they said that software is damaged. I tried to repair software myself, and I probably dead my phone. Can you help please?

Here is the log before I flash my phone:

Code:

ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Flash ID check:897E Flash props sent ok OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED FLASH CID:52 COLOR:RED Model:K800i Brand:Generic MAPP CXC article: R1GB001 prgCXC1250210_GENERIC_WI MAPP CXC version: R1GB001 Language Package:CENT_EUROPE CDA article: CDA102295/1 CDA version: R2A Default article: cxc1250490 Default version: R1GB001 Network LOCKED Operator: 260-01 Elapsed:18 secs.

Here is log from flashing:

Code:

ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:897E Flash props sent ok writing C:\SE\K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:9200 Will flash 460 blocks... SSW loading returns:0 writing C:\SE\K800_R8BF003_FS_CENT_EUROPE_RED52.fbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:4580 Will flash 229 blocks... verify block error last blk:46A70000,00010000 Elapsed:1050 secs.

Phone do not power on, do not power in flash mode... Does nothing.
Thank you very much for help!
Ps: Sorry for my very bad English, I am beginner.
07-14-2009
riders4sia

Re: K800 dead? Help please!

is your barttery fully charged? try other MAIN and FS and flash again, you can get the working MAIN and FS at the TopSony download area
07-15-2009
Polaris-17

Re: K800 dead? Help please!

First of all, thanks for reply.

Battery was fully charged. But I cannot connect phone. Phone do not power, and my computer do not recognize it...

Edit: May be flash area damaged?
07-15-2009
riders4sia

Re: K800 dead? Help please!

try this by senter
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
07-15-2009
sanfelice

Re: K800 dead? Help please!

Try to find the correct MAIN and FS for your CID 52 and a CDA compatible.
After that try flash the phone holding 2+5 instead of "C" button.
07-15-2009
emaxe

Re: K800 dead? Help please!

I have the same problem with my w715 =( where can i download Setool?
07-15-2009
sanfelice

Re: K800 dead? Help please!

You can download Setool2 from download section or here (Top Sony Forums)

\,,/
07-15-2009
Polaris-17

Re: K800 dead? Help please!

Ok, salved. Sorry for making problems, it really was battery problem...

I give successful log:

Code:

Welcome to SEtool2 ( LITE edition ) v 1.11 supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 Loaded 51 flash descriptors if you like LITE edition - please visit www.setool.net and buy FULL. ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:897E Flash props sent ok writing C:\SE\K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:9200 Will flash 460 blocks... SSW loading returns:0 writing C:\SE\K800_R8BF003_FS_CENT_EUROPE_RED52.fbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:4580 Will flash 229 blocks... SSW loading returns:0 Going to execute VKP script.... Starting to process VKP patch script: C:\SE\Remove_SIM_lock_K800_R8BF003_GENERIC.vkp VKP script loaded OK. Lines: 6 Patch structure created OK. Determining blocks to read... New block #0000 added: $44740000 Blocks selected OK. Reading blocks: 1 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written VKP script executed OK Elapsed:815 secs.

Thank you all!
07-28-2009
Polaris-17

Re: K800 dead? Help please!

Solved, closing thred