I have with software problem. SE K510i CID:50

I have with software problem.

Took from your side file fs K510_R4EA031_FS_CENT_EUROPE_RED50 and I wanted him flashing to telephone however he is damaged :{ and it will not give to throw in sie stops near on 3/13 blocks. I have CID: 50.

LOG:

Welcome this SEtool2 ( LITE edition ) v 1.10
supported DB2010 / DB2012 CID49 / 50/51/52, DB2020 CID49 / 51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Abort all operations.
phone pre - boot failed,possible RECOVERY needed.
Elapsed:2 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102459 / 2
MODEL:CLEO_DORIS
VARIANT:CENT_EUROPE
LANGUAGE: EN
LANGUAGE: PL
LANGUAGE: CS
LANGUAGE: SK
LANGUAGE: HU
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI: CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent OK

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying this launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent OK
FOUND: R4EC001_CXC1250242_ORANGE_CO
Restore from:R4EC001_CXC1250242_ORANGE_CO
writing C:Documents and SettingsMarcinPulpitLol1K510_R4EA031_FS_CENT_EUROP E_RED50K510_R4EA031_FS_CENT_EUROPE_RED50
.fbn
CURRENT FLASH FILE CID:50
SSW uses dynamic hash, dynamic hash flax is:113
Will flash 113 blocks...
SSW loading returns:0
writing C:Documents and SettingsMarcinPulpitLol1K510_R4EA031_MAIN_GENERIC_ RED49K510_R4EA031_MAIN_GENERIC_RED50.mbn
CURRENT FLASH FILE CID:50
SSW uses dynamic hash, dynamic hash flax is:327
Will flash 327 blocks...
verify block error
last blk:44200000,00010000
Elapsed:137 secs.

Acting this file can my someone not damaged??? Ask about answer.