W580 after flashing is not working
I was flashing my phone to be able to unlocked but without success. I used the generic main file then the FS americas 1 but then I start having issues with IMEI and the GDFS without being able to recover. I decided to download the GFDS and installed. Now the phone won't even turn on. Is only flasing a red led inside and no signals of life. It there any way to recover it.
22:47:45| Baseband ID: 9900
22:47:45| Protocol Version: 3.1
22:47:46| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
22:47:46| ...using GDFS name
22:47:46|
22:47:46| Profiling SEMC phone...
22:47:46| Platform: DB2020
22:47:46| OTP CID: 51
22:47:46| EROM CID: 52
22:47:46| EROM Color: Red
22:47:46| IMEI: 01157200xxxxxx
22:47:46| Phone ID: W580
22:47:46| Region: CINGULAR
22:47:46| CDA: CDA102774/102 R25A
22:47:46| Firmware Version: R8BE001
22:47:46| EROM: R3A022
22:47:46| Ready for operation!
THanks
Re: W580 after flashing is not working
did you create a gdfs back-up of the phone??? or you just download a gdfs from internet?.. if you installed a wrong gdfs, sorry to say that your phone is already dead.. i think the erom of your phone is damage... you need to repair it,, i suggest you to use wotanserver or kulankendi... just search it on the internet...
Re: W580 after flashing is not working
Thanks, it was damaged after I did the first flashing and it was giving me a lot of error. I tried to used my back up but without success. In my last attempt to recovered the phone, I dowloaded a w580 gdfs with blank info but dies after that. I will see if I my use the wotanserver.
Thanks again
Re: W580 after flashing is not working
did u right a diffrent gdfs to it ? if so ur phones dead for now but it can be fixed show me a read out from se tool lite please
Re: W580 after flashing is not working
if I tried to unlock/repair and reading GDFS this is the message that appeared by holding 2&5 since if I touch c it will flash the red light immediately:
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:73 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1293
Found:1030 variables
Found:263 variables
GDFS read all done, GDFS_01157200437535.BIN written
Phone detached
Elapsed:80 secs.
Regards
Re: W580 after flashing is not working
smth wrong with usercode reset,error is: 1
means u have a diffrent gdfs on the phone
and the unlock repare button is for se tool box users
do u have a gdfs back at all from that phone
Re: W580 after flashing is not working
Yes indeed I have it but it does not let me installed it. Did you have or know about another software that may force the reprograming
THe mistake that I make was that when I was having the configuration error message whenever I boot the phone with the SIm card, I read that GDFS was corrupted and in desperate attempt to recover the Phone I tried to installed another GDFS from another phone but exchanging the IMEI. SInce then the phone is locked and only activating the red flash.
Re: W580 after flashing is not working
u got configuration error becuse u didnt flash a custom pack to it that would off been so easy. if u have the gdfs back up and ur haveing truble righting it back use se tool light add the gdfs back uo to the mics box then press wright gdfs and concet ur phone by holding the 2 and 5 button not the c button this should solve it if not let us know
Re: W580 after flashing is not working
THat's I did and this is the message I got:
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 538969343 variables
gdfsWrite err:A,block:20,unit:2002
Exception in GDFS write. maybe bad gdfs file.
done
Failed.
Elapsed:76 secs.
Re: W580 after flashing is not working
Can is possible to reconstruct a GDFS in case my back up is also damage?