Phone protection on K770i

Hi guys. I am new at phone modding generally, and i haven't done anything on my phone except installing some java applications. I have K770i with the vodafone firmware. My problem is that it has the phone protection code enabled and it is not the factory default (maybe somebody smart put it for fun, i don't know :)). So i cannot use any other sim except mine. It is not the kind of lock that only works with vodafone sims (network lock). It's the phone protection that asks for a password when a different sim than the one already in, is inserted. It is located in Settings-Security-locks-phone protection. Anybody can help me finding a solution? Thank you very much...

PS:: I also searched the forum, but i didn't find anybody with the same problem.....

its becuse ur phone is sim locked to vodafone to use any other sim card it needs to be unlocked

No my friend. It's not this kind of lock as i told you. It's the lock that when you enable, it asks for a password if you change the sim it had when you enabled it. No matter if it's vodafone or anything else. Someone must have entered it (maybe my brother xaxa) and i can't use any other sim than this. Vodafone or not.

what cid it ur phone 52 /53

if you have CID52, run xs 3.1, connect your phone to it using usb cable while holding c, when connected, you'll have the option to select the GDFS tab, now click phone lock, your user code will be reset to 0000, reinsert battery, now start your phone and goto settings, under general slip down to security/locks/phone protection/protection/startup and select off. you may skip the XS part but to be sure its good you known the security code

thank you my friend. I will try it and post results. Unfortunately it will have to wait 2-3 days because i am not at home and don't have a usb cable with me. xaxa Thanks anyway

Quote:

---

15:20:07|

15:20:07| Attempting to open the interface...

15:20:07|

15:20:07| TURN OFF PHONE!

15:20:07| Hold 'C' button on phone and connect phone NOW.

15:20:07| You have 30 seconds...

15:20:07|

15:20:13| Baseband ID: 9900

15:20:13| Protocol Version: 3.1

15:20:13| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K770)

15:20:13| ...using GDFS name

15:20:13|

15:20:13| Profiling SEMC phone...

15:20:13| Platform: DB2020

15:20:13| OTP CID: 51

15:20:13| EROM CID: 53

15:20:13| EROM Color: Red

15:20:13| IMEI: 35238402xxxxxx

15:20:13| Phone ID: K770

15:20:13| Region: VFE_LIVE_1

15:20:13| CDA: 1202-4266 R4A

15:20:13| Firmware Version: R8BA024

15:20:13| EROM: R3A022

15:20:13| Ready for operation!

15:20:19| +++ Sending CERTIFICATE LOADER...

15:20:19|

15:20:19| Sending db2020_cid01_cert_p3g.bin...

15:20:19| Payload: Failed

15:20:19| Unsupported CID!

15:20:19| GDFS operation was successful

15:20:21| Disconnected... Unplug the phone

15:20:24| Shutting down...

---

According to XS++ 3.1 i have the DB2020 /cid 53 phone. And i tried what you told me but it failed. Is there anything else i could do?

u have a cid 53 u will have to pay to have it reset with davinci

I have found some tutorials about flashing db2020/cid 53 phones with far manager and jdflasher. Can't any unlocking be done with these? Maybe with a patch or something?