V630 , red LED blinking, HELP ME PLEASE!!

Hi guys, I would like to know how to rescue my contacts (and maybe phone) from V630!

When I try to turn it on, it only blinks red.....As far Is I found on web, it's EROM or GDFS....

Now, I tried to repair it, but SEtoollite says:

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors

ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101060707 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:5 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101060707 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101060707 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:115200
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101060707 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article:
MAPP CXC version:
Language Package:
CDA article:
CDA version:
Default article:
Default version:

Operator: 000-00

Elapsed:386 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101060707 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:6 secs.



What should I do?

Thanks in advance...........

err 29 is one off 3 things battry gdfs is damged (use D-Ultimate Unlocker to fix it ) or its a blown flash ic se serivice center fix or phone shop

CSloader refused to start GDFS services,error is:29 means there is NO REST file or REST file is corrupted.
1. Go to make_rest folder on setool.
2. Drag your Main (.mbn) over ssw2rest.exe, a file will be made.
3. Cut and paste this file (WITHOUT CHANGING NAME) on the rest folder of setool.
4. Flash ONLY MAIN and try again.
Why don't you use SeTool2Lite 1.11 ?
I hope you're using CID49 firmware and you checked it (with "babeck") to see if it's not corrupted.

And can Setool2 lite repair gdfs for DB2012 (W200 CID53) ? Hope v1.11 support CID53,...

no no se tool box can if u dont have one use D-Ultimate Unlocker what is up with ur gdfs any way