W850 scrambled blue tint screen then wsod

Hi,
This is a really cool forum!

I bought a W850 off a friend and had a few days and it suddenly got a blue tint screen and the graphics scrambled (ie. part of the bottom screen was on the top). I did a master reset and then it just went to a white screen. The phone itself works fine (I can hear all of the keytone pads and play music etc etc) but the screen shows white. Now and then it will show the blue tint screen but usually goes back to white.

I've trawled the net and found people with the same problem but don't know what the outcome was of solutions given. I also tried reflashing with XS++ but it didn't fix the problem.

Could someone please give me advise. Is this a hardware or software problem?

Thanks heaps!

its hardwere need to replace the ribbon on it will solve it 100%
when u do a read out on se tool light does it show as a k700

I used XS++ which showed the following:

07:41:23| XS++ v3.1 (Darwin) Ready !

07:41:23| Executed on Microsoft Windows XP

07:42:15|

07:42:15| Attempting to open the interface...

07:42:15|

07:42:15| TURN OFF PHONE!

07:42:15| Hold 'C' button on phone and connect phone NOW.

07:42:15| You have 30 seconds...

07:42:15|

07:42:18| Baseband ID: 9900

07:42:18| Protocol Version: 3.1

07:42:18| Phone name detected!

07:42:18|

07:42:18| Profiling SEMC phone...

07:42:18| Platform: DB2020

07:42:18| OTP CID: 49

07:42:18| EROM CID: 52

07:42:18| EROM Color: Red

07:42:18| IMEI: 35282601xxxxxx

07:42:18| Phone ID: W850

07:42:18| Region: APAC

07:42:18| CDA: CDA102568/101 R4A

07:42:18| Firmware Version: R1KG001

07:42:18| EROM: R3A016

07:42:18| Ready for operation!

that log look okies is 1 off 3 things
1 ribbon
2 top key pad
3 lcd is damged 1 and 2 have to be changed at the same time

Ok I'll try replace the ribbon first and see what happens. thanks!

i allways replace the ribbon and top keypad as when u remove the ribbon u end up breakeing the contacts on the top key pad

I might buy a broken w850 with a working screen and replace the whole thing.

sounds like a gd idear but then the ribbon my get damged when u take it apart :(

so what do you suggest?

would be better to buy new parts as there cheap ribbons are 3 pound top keypads no more than 7 pound